RF Exposure

FCC ID: XBD-BT38ISC

RF Exposure Info

Download: PDF
FCCID_4233272

                                     MPE REPORT

                                        FCC ID: XBD-BT38ISC


                                     Date of issue: Mar. 23, 2018



       Report Number:                             MTi190311E030


       Sample Description:                        CallCassette


       Model(s):                                  BT38IS Rev C, BTHFS380 Rev C


       Applicant:                                 AAMP of Florida, Inc. dba AAMP Global


       Address:                                   15500 Light wave Dr. Suite 202 Clear water,
                                                  Flor ida 33760 United States


       Date of Test:                              Mar. 04, 2019 – Mar. 13, 2019




                                         Shenzhen Microtest Co., Ltd.
                                                http://www.mtitest.com




This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen
Microtest Co., Ltd.

  Tel:(86-755)88850135            Fax: (86-755) 88850136                   Web: http://www.mtitest.com           E-mail: mti@51mti.com
  Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


                                                       - Page 2 of 4 -                        Report No.: MTi190311E030




                                  TEST RESULT CERTIFICATION
Applicant’s name:                       AAMP of Florida, Inc. dba AAMP Global
Address:                                15500 Lightwave Dr. Suite 202 Clearwater, Florida 33760 United
                                        States
Manufacture's Name:                     Skytech creations limited
Address:                                Unit 507, 5/F., IC Development Centre, No.6 Science Park West
                                        Avenue, Shatin, Hong Kong
Product name:                           CallCassette
Trademark:                              iSimple
Model and/or type reference:            BT38IS Rev C
Serial Model:                           BTHFS380 Rev C
                                        All models are the same circuit and RF module, except for the
Difference in series models:
                                        appearance of the model silk screen
RF Exposure Procedures:                 KDB 447498 D01 v06


This device described above has been tested by Shenzhen Microtest Co., Ltd and the test results
show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is
applicable only to the tested sample identified in the report.




                  Tested by:



                                                               Demi Mu                               Mar. 13, 2019


                Reviewed by:


                                                               Blue Zheng                            Mar. 23, 2019

               Approved by:

                                                               Smith Chen                            Mar. 23, 2019




 Tel:(86-755)88850135         Fax: (86-755) 88850136                Web: http://www.mtitest.com         E-mail: mti@51mti.com
 Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


                                                       - Page 3 of 4 -                        Report No.: MTi190311E030

RF EXPOSURE EVALUATION
According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment
impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b)



Limits for Maximum Permissible Exposure (MPE)




MPE Calculation Method



Friis transmission formula: Pd= (Pout*G)\ (4*pi*R2)
Where

Pd= Power density in mW/cm2

Pout=output power to antenna in mW

G= Numeric gain of the antenna relative to isotropic antenna

Pi=3.1415926

R= distance between observation point and center of the radiator in cm(20cm)

Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the
antenna, through the calculation, we will know the distance where the MPE limit is reached.




 Tel:(86-755)88850135         Fax: (86-755) 88850136                Web: http://www.mtitest.com         E-mail: mti@51mti.com
 Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


                                                       - Page 4 of 4 -                              Report No.: MTi190311E030




      Measurement Result

BT:
Operation Frequency: BT GFSK/π/4-DQPSK/8DPSK: 2402-2480MHz,

                        Power density limited: 1mW/ cm2

Antenna Type: BT Antenna: PCB Antenna;
BT antenna gain: 0dBi

R=20cm

mW=10^(dBm/10)

antenna gain Numeric=10^(dBi/10)= 10^(0/10)=1.00

                              conducted                                                                Evaluation   Power density
                                                                   Max                Antenna                          Limits
                                power                                                                    result
  Channel                                     Tune-up
              modulation
Freq. (MHz)                                 power (dBm)     tune-up power                Gain
                                (dBm)                                                                 (mW/cm2 )      (mW/cm2)
                                                            (dBm)        (mW)    (dBi)    Numeric
   2402                         -3.912          -3±1          -2         0.631    0         1.00        0.0001            1
   2441          GFSK           -4.108          -3±1          -2         0.631    0         1.00        0.0001            1
   2480                         -3.930          -3±1          -2         0.631    0         1.00        0.0001            1
   2402                         -3.217          -3±1          -2         0.631    0         1.00        0.0001            1
   2441       π/4-DQPSK         -3.744          -3±1          -2         0.631    0         1.00        0.0001            1
   2480                         -3.350          -3±1          -2         0.631    0         1.00        0.0001            1
   2402                         -3.123          -3±1          -2         0.631    0         1.00        0.0001            1
   2441         8DPSK           -3.199          -3±1          -2         0.631    0         1.00        0.0001            1
   2480                         -3.097          -3±1          -2         0.631    0         1.00        0.0001            1
Conclusion:

For the max result: 0.0001≤ 1.0 for 1g SAR, No SAR is required.



                                                 ----END OF REPORT----




 Tel:(86-755)88850135         Fax: (86-755) 88850136                 Web: http://www.mtitest.com            E-mail: mti@51mti.com
 Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China



Document Created: 2019-04-04 14:09:50
Document Modified: 2019-04-04 14:09:50

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC