MPE

FCC ID: X7V6291103272

RF Exposure Info

Download: PDF
FCCID_1683613

FCC TEST REPORT Report No. : FR181654-02 Appendix A. RF Exposure Evaluation Page No. : A1 of A3 FCC ID : X7V6291103272

FCC TEST REPORT Report No. : FR181654-02 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) |E|²,|H|² or S (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) |E|²,|H|² or S (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method 30  P  G E2 E (V/m) = Power Density: Pd (W/m²) = d 377 E = Electric field (V/m) P = Peak RF output power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 30  P  G 377  d 2 From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Page No. : A2 of A3 FCC ID : X7V6291103272

FCC TEST REPORT Report No. : FR181654-02 1.3. Calculated Result and Limit Mobile For Single Chain: IEEE 802.11b Operating Power Min. User Gain Numeric Output Power Conducted Frequency Density Distance (cm) (dBi) Gain (dBm) Power (mW) (GHz) (mW/cm2) 2.412 20 3 1.995262 16.36 43.2514 0.0172 IEEE 802.11g Operating Power Min. User Gain Numeric Output Power Conducted Frequency Density Distance (cm) (dBi) Gain (dBm) Power (mW) (GHz) (mW/cm2) 2.437 20 3 1.995262 22.14 163.6817 0.0650 For Two Chains: Configuration ofIEEE 802.11n (20MHz) Operating Power Min. User Gain Numeric Output Power Conducted Frequency Density Distance (cm) (dBi) Gain (dBm) Power (mW) (GHz) (mW/cm2) 2.412 20 3 1.995262 21.68 147.2313 0.0585 Configuration ofIEEE 802.11n (40MHz) Operating Power Min. User Gain Numeric Output Power Conducted Frequency Density Distance (cm) (dBi) Gain (dBm) Power (mW) (GHz) (mW/cm2) 2.422 20 3 1.995262 20.31 107.3989 0.0427 **The antenna gain refer to report section 2.2 table. Page No. : A3 of A3 FCC ID : X7V6291103272


Document Created: 2019-11-16 02:17:41
Document Modified: 2019-11-16 02:17:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC