18_AEFME904U1 RFExp

FCC ID: X4YVEK3600

RF Exposure Info

Download: PDF
FCCID_4156938

FCC RF EXPOSURE REPORT FCC ID: X4YVEK3600 Project No. : 1812C201 Equipment : Vektor 3600-AC Whole Home Mesh WiFi System Test Model : AEFME904U1 Series Model : N/A Applicant : NEXXT SOLUTIONS Address : 3505 N.W 107TH AVE. MIAMI FLORIDA 33178 U.S.A According: : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-3-1812C201 Page 1 of 5 Report Version: R00

1. GENERAL SUMMARY Equipment : Vektor 3600-AC Whole Home Mesh WiFi System Brand Name : NEXXT Test Model : AEFME904U1 Series Model : N/A Applicant : NEXXT SOLUTIONS Manufacturer : NEXXT SOLUTIONS Address : 3505 N.W 107TH AVE. MIAMI FLORIDA 33178 U.S.A Date of Test : Mar. 30, 2018 ~ Apr. 18, 2018 Test Sample : Engineering Sample No.: D180302743, D181212055 Standards : FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-3-1812C201) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-3-1812C201 Page 2 of 5 Report Version: R00

3TL 2) 2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: PG EIRP $= > I~ a,l] 4n 54P where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna: For WLAN 2.4G: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Internal N/A 2 N/A N/A Internal N/A Note: This EUT supports CDD, and all antennas have the same gain, so Directional gain=Gayt+Apay Gain. (1) For Non—Beamforming, for power spectral density measurements, Array Gain=10log(Nant/Nss) dB} that is Directional gain=3+10l0g(2/1)=6.01. So, the power density limit is 8—6.01+6=7.99. (2) Beamforming Gain: 3dBi, so Directional gain=3+3=6dBi. For RLAN 5G: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Internal N/A 2 N/A N/A Internal N/A Note: This EUT supports CDD, and all antennas have the same gain, so Directional gain=Gayr+Array Gain. (1) For Non—Beamforming, for power spectral density measurements, Array Gain=10log(Nant/Nss) dB} that is Directional gain=3+10l0g(2/1)=6.01. So, the UNII—1 power density limit is 17—6.01+6=16.99, the UNII—3 power density limit is 30—6.01+6=29.99. (2) Beamforming Gain: 3dBi, so Directional gain=3+3=6dBi. Report No.: BTL—FCCP—3—1812C201 Page 3 of 5 Report Version: ROO

3. TEST RESULTS WLAN 2.4G Non-Beamforming: Directional Directional Max Output Peak Output Power Limit of Power Test gain gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 6.01 3.9902 27.76 597.0353 0.47419 1 Complies WLAN 2.4G With Beamforming: Directional Directional Max Output Peak Output Power Limit of Power Test gain gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 6.00 3.9811 27.58 572.7960 0.45389 1 Complies RLAN 5G UNII-1 Non-Beamforming Directional Directional Max Output Peak Output Power Limit of Power Test gain gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 6.01 3.9902 27.71 590.2011 0.46876 1 Complies RLAN 5G UNII-3 Non-Beamforming Directional Directional Max Output Peak Output Power Limit of Power Test gain gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 6.01 3.9902 27.67 584.7901 0.46446 1 Complies Report No.: BTL-FCCP-3-1812C201 Page 4 of 5 Report Version: R00

RLAN 5G UNII-1 With Beamforming Directional Directional Max Output Peak Output Power Limit of Power Test gain gain Power Power Density (S) Density (S) 2 Result (dBi) (numeric) (dBm) (mW) (mW/cm ) (mW/cm2) 6.00 3.9811 27.6 575.4399 0.45598 1 Complies RLAN 5G UNII-3 With Beamforming Directional Directional Max Output Peak Output Power Limit of Power Test gain gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 6.00 3.9811 27.55 568.8529 0.45077 1 Complies For the max simultaneous transmission MPE: Power Density Power Density Limit of Power (S) (mW/cm2) (S) (mW/cm2) Total Density (S) Test Result 2.4G 5G (mW/cm2) 0.47419 0.46876 0.94295 1 Complies Note: the calculated distance is 20 cm. End of Test Report Report No.: BTL-FCCP-3-1812C201 Page 5 of 5 Report Version: R00


Document Created: 2019-03-21 14:05:05
Document Modified: 2019-03-21 14:05:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC