UNII Device Declaration Letter

FCC ID: X4YNYX2600

Cover Letter(s)

Download: PDF
FCCID_4131797

Federal Communication Commission
Equipment Authorization Division, Application Processing Branch
7435 Oakland Mills Road
Columbia, MD 21046

                                    UNII Device Declaration Letter


To whom it may concern:


We have declared below featured for FCC equipment authorization,
Device FCC ID:X4YNYX2600

(1) DFS Device:                            Master       Client with Radar detection capability
                                          ■ N/A          Client without radar detection capability,

(2) Active / Passive Scanning , adhoc mode access point capability

     Frequency         Active Scanning        passive scanning         Ad Hoc Mode            Access point
     Band (MHz)         (the device can       (where the device         Capability             Capability
                       transmit a probe        is can listen only
                           (beacon))            with no probes)
      5180-5240         Yes       No          Yes        No       Yes        No       Yes           No
      5190-5230         Yes       No          Yes        No       Yes        No       Yes           No
      5210-5210         Yes       No          Yes        No       Yes        No       Yes           No

(3) Country code selection ability        Yes           No
    If yes, pls explain how it was implemented:

(4) Meet 15.202 requirement               Yes            No
    pls check below :
     A master device is defined as a device operating in a mode in which it has the capability to
     transmit without receiving an enabling signal. In this mode it is able to select a channel and
     initiate a network by sending enabling signals to other devices
     A client device is defined as a device operating in a mode in which the transmissions of the
     device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active
    scanning in some and passive scanning in others) in different bands (devices with multiple
    equipment classes or those that operate on non- DFS frequencies) or modular devices which
    configure the modes of operations through software, the application must provide software and
    operations description on how the software and / or hardware is implemented to ensure that
    proper operations modes cannot be modified by end user or an installer.
     Apply                               Does not apply
    (If apply, pls help to provide explanation on it was implement, and how software was controlled)

Sincerely,




Name:                     Albert Mizrachi/Vice president of product development
Company:                  NEXXT SOLUTIONS
Address:                  3505 N.W. 107th AVE. MIAMI FLORIDA 33178 U.S.A
Phone:                    786-280-9600
Fax:                      305 477-5694
E-Mail:                   albert@intcomex.com



Document Created: 2019-03-29 03:12:41
Document Modified: 2019-03-29 03:12:41

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC