Test Report

FCC ID: X3A-MG321356M

Test Report

Download: PDF
FCCID_2050414

FCC PART 15.225 TEST REPORT For Shanghai Smarfid Security Equipment Co., Ltd. Room 301, 4th Bldg., No.4 TongLi Road, SongJiang District, Shanghai 201615, China FCC ID: X3A-MG321356M Report Type: Product Type: Original Report Magic Series 13.56MHz reader Test Engineer: Allen Qiao Report Number: R2SH130708053-00 Report Date: 2013-08-07 Ivan Cao Reviewed By: RF Leader Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industrial Zone, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” (Rev.2) This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0.

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 JUSTIFICATION .............................................................................................................................................................5 EUT EXERCISE SOFTWARE ..........................................................................................................................................5 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................5 EXTERNAL CABLE........................................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................5 SUMMARY OF TEST RESULTS ...............................................................................................................................6 FCC§15.203 - ANTENNA REQUIREMENT..............................................................................................................7 APPLICABLE STANDARD ..............................................................................................................................................7 ANTENNA CONNECTED CONSTRUCTION ......................................................................................................................7 FCC§15.225, §15.205 & §15.209 - RADIATED EMISSIONS TEST ........................................................................8 APPLICABLE STANDARD ..............................................................................................................................................8 MEASUREMENT UNCERTAINTY ....................................................................................................................................8 EUT SETUP ..................................................................................................................................................................9 EMI TEST RECEIVER SETUP .........................................................................................................................................9 CORRECTED AMPLITUDE & MARGIN CALCULATION ...................................................................................................9 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................10 TEST RESULTS SUMMARY ..........................................................................................................................................10 TEST DATA ................................................................................................................................................................10 FCC§15.225(E) - FREQUENCY STABILITY..........................................................................................................12 APPLICABLE STANDARD ............................................................................................................................................12 TEST PROCEDURE ......................................................................................................................................................12 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................12 TEST DATA ................................................................................................................................................................12 FCC §15.215(C) – 20 DB EMISSION BANDWIDTH ..............................................................................................14 DECALRATION OF SIMILARITY .........................................................................................................................16 FCC Part 15.225 Page 2 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 GENERAL INFORMATION Product Description for Equipment Under Test (EUT) The Shanghai Smarfid Security Equipment Co., Ltd.’s product, model number: MW322-8K (FCC ID: X3A- MG321356M) or ("EUT”) in this report is a Magic Series 13.56MHz reader, which was measured approximately: 11.5 cm (L) x 8.5 cm (W) x 2.5cm (H), rated input voltage: DC 12.0 V from system. Note: The series product, model MW322-8K, MX322-8K, MC322-8K, MW322-8N, MX322-8N, MC322-8N are electrically identical except for model name and with or without buttons ("K" means have buttons, "N" means have no buttons), we selected MW322-8K for fully testing, and MW322-8N for Radiated Emission Test, the details was explained in the attached declaration letter. * All measurement and test data in this report was gathered from production sample serial number: 130708053 (Assigned by Dongguan BACL). The EUT was received on 2013-07-09. Objective This Type approval report is prepared on behalf of Shanghai Smarfid Security Equipment Co., Ltd. in accordance with Part 2, Subpart J, and Part 15, Subparts A, B and C of the Federal Communication Commissions rules. The objective is to determine the compliance of the EUT with FCC rules, sec 15.203, 15.205, 15.207, 15.209 and 15.225. Related Submittal(s)/Grant(s) No Related Submittals. Test Methodology All measurements contained in this report were conducted with ANSI C63.4-2003, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. All emissions measurement was performed and Bay Area Compliance Laboratories Corp. (Dongguan). FCC Part 15.225 Page 3 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Dongguan) to collect test data is located on the No.69 Pulongcun, Puxinhu Industrial Zone, Tangxia, Dongguan, Guangdong, China Test site at Bay Area Compliance Laboratories Corp. (Dongguan) has been fully described in reports submitted to the Federal Communication Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on February 02, 2012. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4- 2003. The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 273710. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. Additionally, Bay Area Compliance Laboratories Corp. (Dongguan) is an ISO/IEC 17025 accredited laboratory, and is accredited by National Voluntary Laboratory Accredited Program (Lab Code 500069-0). The current scope of accreditations can be found at http://ts.nist.gov/standards/scopes/5000690.htm FCC Part 15.225 Page 4 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 SYSTEM TEST CONFIGURATION Justification The system was configured for testing in a typical fashion (as normally used by a typical user). EUT Exercise Software No software was performed under test. Support Equipment List and Details Manufacturer Description Model Serial Number DELL Laptop PP11L QDS-BRCM1017 Pro instrument DC Power Supply pps3300 N/A External Cable Cable Description Length (m) From To Serial port of Laptop and Shielded Un-detachable Control Cable 3.0 EUT DC power Supply Block Diagram of Test Setup D C Pow er Supply L aptop EUT 1.0 Meter N on-C onductive T able 80 cm above G round Plane 1.5 M eter FCC Part 15.225 Page 5 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §15.203 Antenna Requirement Compliance §15.207 AC Line Conducted Emission Not Applicable* §15.225 Radiated Emission Test Compliance §15.209 §15.205 §15.225(e) Frequency Stability Compliance §15.215(c) 20 dB Emission Bandwidth Compliance Not Applicable*: the EUT was powered by DC 12V. FCC Part 15.225 Page 6 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 FCC§15.203 - ANTENNA REQUIREMENT Applicable Standard An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. Antenna Connected Construction This EUT has an integrated antenna arrangement which fulfills the requirement of this section, and please refers to the internal photos. Result: Compliance. FCC Part 15.225 Page 7 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 FCC§15.225, §15.205 & §15.209 - RADIATED EMISSIONS TEST Applicable Standard As per FCC Part 15.225 (a) The field strength of any emissions within the band 13.553–13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters. (b) Within the bands 13.410–13.553 MHz and 13.567–13.710 MHz, the field strength of any emissions shall not exceed 334 microvolts/meter at 30 meters. (c) Within the bands 13.110–13.410 MHz and 13.710–14.010 MHz the field strength of any emissions shall not exceed 106 microvolts/meter at 30 meters. (d) The field strength of any emissions appearing outside of the 13.110–14.010 MHz band shall not exceed the general radiated emission limits in §15.209. Measurement Uncertainty Compliance or non- compliance with a disturbance limit shall be determined in the following manner： If Ulab is less than or equal to Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level exceeds the disturbance limit. If Ulab is greater than Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit. Based on CISPR 16-4-2: 2011, measurement uncertainty of radiated emission at a distance of 3m at Bay Area Compliance Laboratories Corp. (Dongguan) is: 30M~200MHz: 5.0 dB 200M~1GHz: 6.2 dB 1G~6GHz: 4.45 dB 6G~18GHz: 5.23 dB Table 1 – Values of Ucispr Measurement Ucispr Radiated disturbance (electric field strength at an OATS or in a SAC) (30 MHz to 1000 MHz) 6.3 dB Radiated disturbance (electric field strength in a FAR) (1 GHz to 6 GHz) 5.2 dB Radiated disturbance (electric field strength in a FAR) (6 GHz to 18 GHz) 5.5 dB FCC Part 15.225 Page 8 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 EUT Setup The radiated emission tests were performed in the 3-meter chamber a test site, using the setup accordance with the ANSI C63.4-2003. The specification used was the FCC Part Subpart C limits. The spacing between the peripherals was 10 cm. The EUT was connected to 12V DC power source. EMI Test Receiver Setup According to FCC Rules, 47 CFR 15.33, the EUT emissions were investigated up to 1000 MHz. During the radiated emission test, the EMI test Receiver was set with the following configurations: Frequency Range RBW Video B/W Detector 9kHz – 150 kHz 300 Hz 1 kHz QP 150KHz – 30 MHz 10 kHz 30 kHz QP 30MHz – 1000 MHz 100 kHz 300 kHz QP Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Loss and Cable Loss, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Meter Reading + Antenna Loss+ Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the maximum limit. The equation for margin calculation is as follows: Margin = Limit - Corr. Ampl. FCC Part 15.225 Page 9 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date EMI TEST R&S ESCI 100224 2013-5-6 2014-5-5 RECEIVER Sunol Antenna JB3 A060611-1 2012-9-6 2015-9-5 Sciences HP HP AMPLIFIER 8447E 2434A02181 N/A N/A The Electro- Mechanics Passive Loop Antenna 6512 9706-1206 2012-11-30 2015-11-29 Company * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to National Primary Standards and International System of Units (SI). Test Results Summary According to the data in the following table, the EUT complied with the FCC Part 15.209 with the worst margin reading of: 11.48 dB at 35.82 MHz in the Vertical polarization Test Data Environmental Conditions Temperature: 24.8 C Relative Humidity: 57 % ATM Pressure: 99.8kPa * The testing was performed by Allen Qiao on 2013-08-01. Test mode: Transmitting(MW322-8K was the worst) FCC Part 15.225 Page 10 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 1) Spurious Emissions (9 kHz~30 MHz): Frequency Receiver Corrected FCC 15.225 Cable Amplifier Factor Amplitude loss Gain Limit @ Reading Detector (dB(1/m)) @ 3m Margin (MHz) (dB) (dB) 3m (dBμV) (PK/QP/AV) (dBμV/m) (dB) (dBμV/m) 0.95 22.21 QP 48.10 0.76 21.50 49.57 69.50 19.93 5.63 18.24 QP 34.30 0.76 21.50 31.80 69.50 37.70 13.21 11.7 QP 32.10 0.76 21.50 23.06 80.50 57.44 13.415 17.37 QP 32.10 0.76 21.50 28.73 90.50 61.77 13.56 33.71 QP 32.10 0.76 21.50 45.07 124.00 78.93 13.575 16.91 QP 32.10 0.76 21.50 28.27 90.50 62.23 13.805 14.72 QP 32.10 0.76 21.50 26.08 80.50 54.42 21.561 13.72 QP 31.30 0.76 21.50 24.28 69.50 45.22 2) Spurious Emissions (30 MHz ~1 GHz): Receiver Rx Antenna Cable Amplifier Corrected Frequency Limit Margin Reading Detector Polar Factor loss Gain Amplitude MHz dBμV PK/QP/AV H/V dB(1/m) dB dB dBμV/m dBμV/m dB 35.82 21.6 QP H 17.67 0.77 21.42 18.62 40.00 21.38 35.82 31.5 QP V 17.67 0.77 21.42 28.52 40.00 11.48 108.57 25.9 QP H 12.63 1.27 21.41 18.39 43.50 25.11 108.57 38.1 QP V 12.63 1.27 21.41 30.59 43.50 12.91 FCC Part 15.225 Page 11 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 FCC§15.225(e) - FREQUENCY STABILITY Applicable Standard The frequency tolerance of the carrier signal shall be maintained within ±0.01% of the operating frequency over a temperature variation of −20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. Test Procedure Frequency Stability vs. Temperature: The equipment under test was connected to PC, than to an external AC power supply and loop antenna was connected to a f Spectrum Analyzer. The EUT was placed inside the temperature chamber. After the temperature stabilized for approximately 20 minutes, the frequency output was recorded from the Spectrum Analyzer. Frequency Stability vs. Voltage: An external variable AC power supply Source. The voltage was set to 115% of the nominal value and was then decreased until the transmitter light no longer illuminated; i.e., the end point. The output frequency was recorded for each voltage. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S Spectrum analyzer FSP 38 100478 2013-6-16 2014-6-15 Dongzhixu Humidity tester DP1000 201105083-3 2013-7-3 2014-7-2 The Electro- Mechanics Passive Loop Antenna 6512 9706-1206 2012-11-30 2015-11-29 Company * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 28.8 °C Relative Humidity: 59 % ATM Pressure: 99.8 kPa The testing was performed by Allen Qiao on 2013-08-01. FCC Part 15.225 Page 12 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 Test Mode: Transmitting Test Result: Pass fo = 13.56 MHz Measured Temperature Voltage Frequency frequency Limit Error ℃ VDC MHz -20 12 13.56088 0.0065% ±0.01% -10 12 13.5609 0.0066% ±0.01% 0 12 13.56088 0.0065% ±0.01% 10 12 13.56092 0.0068% ±0.01% 20 12 13.56085 0.0063% ±0.01% 30 12 13.56086 0.0063% ±0.01% 40 12 13.5609 0.0066% ±0.01% 50 12 13.56089 0.0066% ±0.01% 25 13.8 13.56088 0.0065% ±0.01% 25 10.2 13.56087 0.0064% ±0.01% FCC Part 15.225 Page 13 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 FCC §15.215(c) – 20 dB EMISSION BANDWIDTH Applicable Standard Per FCC §15.215 (c) Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §15.217 through § 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. The requirement to contain the designated bandwidth of the emission within the specified frequency band includes the effects from frequency sweeping, frequency hopping and other modulation techniques that may be employed as well as the frequency stability of the transmitter over expected variations in temperature and supply voltage. If a frequency stability is not specified in the regulations, it is recommended that the fundamental emission be kept within at least the central 80% of the permitted band in order to minimize the possibility of out-of - band operation. Test Procedure 1 Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2 Position the EUT without connection to measurement instrument. Turn on the EUT and connect it to measurement instrument. Then set it to any one convenient frequency within its operating range. Set a reference level on the measuring instrument equal to the highest peak value. 3 Measure the frequency difference of two frequencies that were attenuated 20 dB from the reference level. Record the frequency difference as the emission bandwidth. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S Spectrum analyzer FSP 38 100478 2013-6-16 2014-6-15 The Electro- Passive Loop 6512 9706-1206 2012-11-30 2015-11-29 Mechanics Company Antenna * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 28.8 °C Relative Humidity: 59 % ATM Pressure: 99.8 kPa The testing was performed by Allen Qiao on 2013-08-01. FCC Part 15.225 Page 14 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 Test Mode: Transmitting 20 dB Emission Bandwidth FCC Part 15.225 Page 15 of 16

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2SH130708053-00 DECALRATION OF SIMILARITY *****END OF REPORT***** FCC Part 15.225 Page 16 of 16


Document Created: 2013-08-21 10:36:34
Document Modified: 2013-08-21 10:36:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC