FCC MA Letter

FCC ID: WY7-21

Cover Letter(s)

Download: PDF
FCCID_2201212

SHIMANO SHIMANO INC. 77 Oimatsu—cho 8—cho Sakai Osake 590 8577Japan Phone: +81—72—228—8885 Fax: +81—72—220.9988 Request for Modular Transmitter Approval February 5, 2014 FCC ID : WY7—21 Applicant: Shimano.INC This transmitter, model: S—W092 is designed by us. It complies with the modular transmitters basic requirements (Item 1 to 8) in FCC Part 15 Subpart C Section 15.212 as indicated below: Modular Approval Checklist: Modular approval requirement x Kz o 0 0 0 Oz {1) Have its own RF shielding. (2) Have buffered modulation/data inputs. (3) Have its own power supply regulation. (4) Comply with the antenna and transmission system requirements K a m of § 15.203, 15.204(b) and 15.204(c). (5) Tested in a stand—zlone configuration. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements foundin FCC § 15.207. AC or DC power lines and data input/output. lines connected to the module must not contain ferrites, unless they will be marketed with the module. The length ofthese lines shall be the Jength typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any.. accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available. (6) Equipped with either a permanently affixed label or must be capable ofelectronically displaying its FCC TD. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. (7) Comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. (8) Comply with any applicable RF exposure requirements in its final configuration: The modular transmitter complies with FCC radiation exposure requirement. 0o e Kimura Masatsugu Shimano.INC


Document Created: 2014-02-05 17:48:15
Document Modified: 2014-02-05 17:48:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC