User manual_01

FCC ID: WY7-11

Users Manual

Download: PDF
FCCID_2141499

UM-7G90A-000-00 User's manual • Store in a safe place out of the reach of small children to avoid letting them swallow by mistake. Functions • 2.4GHz digital wireless system Wireless Unit 2.4GHz-frequency digital wireless technology, which is the same technology used for wireless LAN. The wireless unit transmits the following three types of information to compatible cycle computers or receivers. However, in a very rare occasions, objects and places may generate 1) Number of gears (front, rear) strong electromagnetic, waves and interference, which may result in 2) Di2 battery level (External type: SM-BTR1, Built-in type: SM-BTR2) incorrect measurement. 3) Adjustment mode information User's manuals in other languages are available at : * Television, PC, radios, motors/engines, or in car and trains. For information on which of the above types of information is to be http://si.shimano.com * Railroad crossings and near railway tracks, around television displayed, refer to the manual for your cycle computer or receiver. transmitting stations and radar bases. * Other wireless computers or digitally controlled light. IMPORTANT NOTICE • Products are not guaranteed against natural wear and deterioration How to conduct pairing from normal use and aging. • Contact the place of purchase or a bicycle dealer for information on To conduct pairing, the cycle computer needs to be in pairing mode. For installation and adjustment of the products which are not found in • For maximum performance we highly recommend Shimano lubricants information on how to put the cycle computer into pairing mode, refer the user's manual. A dealer's manual for professional and and maintenance products. to the manual for the cycle computer. experienced bicycle mechanics is available on our website (http://si. 1) Put the cycle computer into pairing mode. shimano.com). Regular inspections before riding the 2) When using an external battery • Do not disassemble or alter this product. Check that the electric wires are connected to the wireless unit. bicycle Then, remove and remount the external battery. For safety, be sure to read this user's manual When using a built-in battery Check that the electric wires are connected to the wireless unit. thoroughly before use, and follow them for Before riding the bicycle, check the following items. If any problems are Then, remove the electric wires (two wires) from the wireless unit found with the following items, contact the place of purchase or a correct use. bicycle dealer. and reconnect them. (Pairing communication is conducted for a few tens of seconds after the battery is remounted or the electric wires are reconnected to the Important Safety Information • Is the wireless unit securely installed to the frame? wireless unit.) 3) This completes the pairing process. Guidelines that require replacement, contact the place of purchase or a • Is there sufficient charge remaining in the battery? Check on the cycle computer to see if pairing has succeeded. bicycle dealer. • Is there any noticeable damage to the electric wires? For information on how to show the number of gears or the Di2 battery level, refer to the manual for the cycle computer. WARNING Names of parts • When the shifting switch is operated, the motor which drives the rear derailleur will operate to the shifting position without stopping, so be careful not to get your fingers caught. • After reading the user's manual carefully, keep it in a safe place for later reference. Note • This is a small waterproof connector. Do not repeat connecting and disconnecting it. It may impair the function. • The components are designed to be fully waterproofed to withstand wet weather riding conditions; however, do not deliberately place them into water. Battery (SM-BTR1) • Do not clean the bicycle in a high-pressure car wash. If water gets into any of the components, operating problems or rusting may result. • Handle the products carefully, and avoid subjecting them to any strong shocks. Wireless unit (SM-EWW01) • Contact the place of purchase for updates of the product software. The most up-to-date information is available on the Shimano Electric wire website. One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003 • Do not use thinners or similar substances to clean the products. Such substances may damage the surfaces. Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan • Be careful not to let water get into the terminal. Please note: specifications are subject to change for improvement without notice. (English) © Oct. 2013 by Shimano Inc. HTR


Document Created: 2013-12-10 14:40:15
Document Modified: 2013-12-10 14:40:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC