FCC Module Approval Attestation Letter

FCC ID: WUI-LM57176

Cover Letter(s)

Download: PDF

FCCID_4415322

Winplus Co. Ltd

Date (08/22/2019)

TUV SUD BABT TCB
Octagon House,
Segensworth Road,
Fareham,
Hampshire,
PO15 5RL

Dear Sir/Madam,

RE: Modular Approval Request for Model:

FCC ID: WUI-LM57176

The following attestation addresses the requirements to support modular approval:

Modular approval requirement Yes No *
(a) The radio elements must have the radio √
frequency circuitry shielded. Physical The radio module do not has shielded cover, so it
components and tuning capacitor(s) may was tested with a host for this modular
be located external to the shield, but must approve application, the host information as below
be on the module assembly Company name: Winplus Co., Ltd.
Product/PMN: LED Ceiling light with ambiance glow
Model no./HVIN: LM57176
(b) The module must have buffered √
modulation/data inputs to ensure that the
device will comply with Part 15
requirements with any type of input signal
(c) The module must contain power supply √
regulation on the module
(d) The module must contain a √
permanently attached antenna, or contain
a unique antenna connector, and be
marketed and operated only with specific
antenna(s), per Sections 15.203,
15.204(b), 15.204(c), 15.212(a), 2.929(b)
(e) The module must demonstrate √
compliance in a stand-alone configuration
(f) The module must be labelled with its √
permanently affixed FCC ID label, or use
an electronic display (See KDB Publication
784748 about labelling requirements)
(g) The module must comply with all √
specific rules applicable to the transmitter.
The grantee must provide comprehensive
instructions to explain compliance
requirements
(h) The module must comply with RF √
exposure requirements

Document Created: 2019-08-27 10:48:01
Document Modified: 2019-08-27 10:48:01

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC