RF exposure

FCC ID: WUI-BT57143

RF Exposure Info

Download: PDF
FCCID_4454040

                                             TEST REPORT
 Reference No. ...................        : WTD19S08058102W002

 FCC ID………………………                          : WUI-BT57143

 Applicant ...........................    : Winplus Co., Ltd.
 Address .............................    : Suites 6-11, 7th Floor, Corporation Park, 11 On La, Shatin, Hong
                                            Kong
 Manufacturer ....................        : Winplus Co., Ltd.
 Address .............................    : Suites 6-11, 7th Floor, Corporation Park, 11 On La, Shatin, Hong
                                            Kong
 Product ..............................   : Drive 360 Dash Cam
 Model(s). ............................   : BT57143
 Standards ..........................     : FCC CFR47 Part 1 Section 1.1037:2019
                                            FCC CFR47 Part 2 Section 2.1091:2019
 Date of Receipt sample ....              : 2019-08-30

 Date of Test .......................     : 2019-08-31 to 2019-09-11

 Date of Issue .....................      : 2019-09-16
 Test Result ........................     : Pass
 Remarks:
 The results shown in this test report refer only to the sample(s) tested, this test report cannot be
 reproduced, except in full, without prior written permission of the company. The report would be invalid
 without specific stamp of test institute and the signatures of compiler and approver.



                                              Prepared By:
                                 Waltek Services (Shenzhen) Co., Ltd.
    Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen,
                                           Guangdong, China
                                        Test site/Test location:
                                 Waltek Services (Shenzhen) Co., Ltd.
    Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen,
                                           Guangdong, China
                                         Tel :+86-755-83551033
                                         Fax:+86-755-83552400
         Compiled by:                                                  Approved by:




         Frank Yin / Test Engineer                                     Philo Zhong / Manager




Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn                                 Page 1 of 8


 Reference No.: WTD19S08058102W002                  Page 2 of 8



1     Laboratories Introduction
Waltek Services (Shenzhen) Co., Ltd is a professional third-party testing and certification laboratory with
multi-year product testing and certification experience, established strictly in accordance with ISO/IEC 17025
requirements, and accredited by ILAC (International Laboratory Accreditation Cooperation) member. A2LA
(American Association for Laboratory Accreditation, the certification number is 4243.01) of USA, CNAS
(China National Accreditation Service for Conformity Assessment, the registration number is L3110) of
China.Meanwhile, Waltek has got recognition as registration and accreditation laboratory from EMSD
(Electrical and Mechanical Services Department), and American Energy star, FCC(The Federal
Communications Commission), CEC(California energy efficiency), ISED Canada (Innovation, Science and
Economic Development Canada). It’s the strategic partner and data recognition laboratory of international
authoritative organizations, such as Intertek(ETL-SEMKO), TÜV Rheinland, TÜV SÜD, etc.




Waltek Services (Shenzhen) Co., Ltd is one of the largest and the most comprehensive third party testing
laboratory in China. Our test capability covered four large fields: safety test. ElectroMagnetic
Compatibility(EMC), and energy performance, wireless radio. As a professional, comprehensive, justice
international test organization, we still keep the scientific and rigorous work attitude to help each client satisfy
the international standards and assist their product enter into globe market smoothly.




Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn


 Reference No.: WTD19S08058102W002            Page 3 of 8



1.1    Test Facility
      A. Accreditations for Conformity Assessment (International)
       Country/Region        Scope Covered By           Scope                    Note
       USA                                              FCC ID \ SDoC(VOC/DOC)   1
       Canada                                           IC ID \ VOC              2
       Japan                                            MIC-T \ MIC-R            -
       Europe                                           EMCD \ RED               -
       Taiwan                                           NCC                      -
                             ISO/IEC 17025
       Hong Kong                                        OFCA                     -
       Australia                                        RCM                      -
       India                                            WPC                      -
       Thailand                                         NTC                      -
       Singapore                                        IDA                      -
       Note:
       1.   FCC Designation No.: CN1201. Test Firm Registration No.: 523476.
       2.   ISED CAB identifier : CN0013. Test Firm Registration No.: 7760A.

      B.TCBs and Notify Bodies Recognized Testing Laboratory.


       Recognized Testing Laboratory of …                   Notify body number
       TUV Rheinland
       Intertek
                                                            Optional.
       TUV SUD
       SGS
       Phoenix Testlab GmbH                                 0700
       Element Materials Technology Warwick Ltd.            0891
       Timco Engineering, Inc.                              1177
       Eurofins Product Service GmbH                        0681




Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn


    Reference No.: WTD19S08058102W002                                         Page 4 of 8



2       Contents
                                                                                                                                                                     Page
       COVER PAGE ........................................................................................................................................... 1
1      LABORATORIES INTRODUCTION ................................................................................................................... 2
       1.1     TEST FACILITY ................................................................................................................................................. 3
2      CONTENTS ............................................................................................................................................................ 4

3      REVISION HISTORY ............................................................................................................................................ 5
4      GENERAL INFORMATION .................................................................................................................................. 6
       4.1     GENERAL DESCRIPTION OF E.U.T ................................................................................................................. 6
5      RF EXPOSURE ...................................................................................................................................................... 7
       5.1     REQUIREMENTS............................................................................................................................................... 7
       5.2     EVALUATION RESULT ...................................................................................................................................... 8




Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn


 Reference No.: WTD19S08058102W002           Page 5 of 8



3      Revision History
                              Date of
                                                           Date of               Commen   Approve
       Test report No.        Receipt     Date of Test                Purpose
                                                            Issue                   t        d
                              sample

                                          2019-08-31
    WTD19S08058102W002       2019-08-30       to         2019-09-16   original     -       Valid
                                          2019-09-11




Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn


 Reference No.: WTD19S08058102W002           Page 6 of 8


4     General Information
4.1   General Description of E.U.T
      Product:                   Drive 360 Dash Cam

      Model(s).:                 BT57143
      Operation Frequency:       802.11b/g/n HT20: 2412MHz ~ 2462MHz
                                 802.11n HT40: 2422MHz~2452MHz
      Antenna installation:      Integrated Antenna
      Antenna Gain:              0dBi
      Type of modulation:        IEEE 802.11b (CCK/QPSK/BPSK,11Mbps max.)
                                 IEEE 802.11g (BPSK/QPSK/16QAM/64QAM,54Mbps max.)
                                 IEEE 802.11n (BPSK/QPSK/16QAM/64QAM,HT20:72Mbps max.,
                                  HT40:150Mbps max.)




Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn


 Reference No.: WTD19S08058102W002               Page 7 of 8



5      RF Exposure
      Test Requirement:           FCC Part 1.1307
      Test Method:                FCC Part 2.1091


5.1    Requirements

      Systems operating under the provisions of this section shall be operated in a manner that ensures that
      the public is not exposed to radio frequency energy levels in excess limit for maximum permissible
      exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been
      defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user
      and the device.
      (A) Limits for Occupational / Controlled Exposure
                                                Magnetic Field                        Averaging Time
       Frequency Range        Electric Field                     Power Density (S)        2    2
                                                 Strength (H)               2          |E| ,|H| or S
            (MHz)         Strength (E) (V/m)                        (mW/ cm )
                                                    (A/m)                               (minutes)
           0.3-3.0               614                1.63              (100)*                 6
            3.0-30             1842 / f            4.89 / f          (900 / f)*              6
           30-300                61.4               0.163                 1.0                6
          300-1500                                                    F/300                  6
        1500-100,000                                                      5                  6

       (B) Limits for General Population / Uncontrolled Exposure
                                               Magnetic Field                         Averaging Time
      Frequency Range        Electric Field                      Power Density (S)        2    2
                                                Strength (H)                2          |E| ,|H| or S
            (MHz)         Strength (E) (V/m)                        (mW/ cm )
                                                    (A/m)                                (minutes)
           0.3-1.34              614                1.63              (100)*                30
           1.34-30              824/f               2.19/f            (180/f)*              30
           30-300                27.5               0.073                 0.2               30
          300-1500                                                    F/1500                30
        1500-100,000                                                      1.0               30
      Note: f = frequency in MHz ; *Plane-wave equivalent power density




Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn


 Reference No.: WTD19S08058102W002            Page 8 of 8



5.2   Evaluation Result

      E (V/m) =
                     30 × P × G       Power Density: Pd (W/m²) =
                                                                    E2
                         d                                          377
      E = Electric field (V/m)
      P = RF output power (W)
      G = EUT Antenna numeric gain (numeric)
      d = Separation distance between radiator and human body (m)
      The formula can be changed to

      Pd =
             30 × P × G
              377 × d 2
From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of
the used antenna, the RF power density can be obtained


                                                                                       Limit of Power
Antenna Gain      Antenna Gain     Max. Output      Output Power      Power Density
                                                                                          Density
    (dBi)           (numeric)      Power (dBm)                         (mW/cm2)
                                                         (mW)                            (mW/cm2)

      0                 1.0           18.29              67.45            0.0134             1
Result: Compliance
No SAR measurement is required.




                                      ======End of Report======




Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn



Document Created: 2019-09-23 07:53:05
Document Modified: 2019-09-23 07:53:05

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC