FCC Module Approval Attestation Letter

FCC ID: WUI-BLELED

Cover Letter(s)

Download: PDF
FCCID_4466061

Winplus Co., Ltd. Date (09/19/2019) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir/Madam, RE: Modular Approval Request for Model: FCC ID: WUI-BLELED The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes No * (a) The radio elements must have the radio √ frequency circuitry shielded. Physical The radio module do not has shielded cover, so it components and tuning capacitor(s) may was tested with a host for this modular be located external to the shield, but must approve application, the host information as below be on the module assembly Company name: Winplus Co., Ltd. Product/PMN: Exterior Trim LED Model no./HVIN: LM57485 (b) The module must have buffered √ modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal (c) The module must contain power supply √ regulation on the module (d) The module must contain a √ permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) (e) The module must demonstrate √ compliance in a stand-alone configuration (f) The module must be labelled with its √ permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) (g) The module must comply with all √ specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements (h) The module must comply with RF √ exposure requirements

Winplus Co., Ltd. * Please provide a detailed explanation if the answer is “No.” Yours sincerely, Name: Benson Leung Title: Director


Document Created: 2019-09-27 10:25:00
Document Modified: 2019-09-27 10:25:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC