User Manual sep,19

FCC ID: WSGSK-BH-M6

Users Manual

Download: PDF
FCCID_1544357

—— Reorient or relocate the receiving antenna. This device complies with Part 15 of the FCC Rules. Specifications: Operation is subject to the following two conditions: —— Increase the separation between the equipment and receiver. Model Number: BH—M6 (1) this device may not cause harmful interference, and =—— Connect the equipment into an outlet on a circuit different Bluetooth Headset user Guide Signal Output: Bluetooth v2.1, Class 2 (2) this device must accept any interference received, from that to which the receiver is connected. Talk Time: Up to 13 hours including interference that may cause undesired operation. —— Consult the dealer or an experienced radio/TV technician Standby Time: Up to 220 hours for help. statement: Profiles: Headset & Handsfree (1)changes or modifications not expressly approved by the Connections: Up to 2 devices simultaneously party responsible for compliance could void the user‘s Data Encryption: 128 bits encrypted authority to operate the equipment. Safety Regulation: CE, FCC, BQB (2)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of Overview: the FCC Rules. These limits are designed to provide Thank you for purchasing this headset. Please double reasonable protection against harmful interference in a check the contents of the packaging to verify that you have residential installation. This equipment generates, uses and received all items. Be sure the completely read the user can radiate radio frequency energy and, if not installed and guide before using the headset. This headset can be used in accordance with the instructions, may cause harmful connected/paired with any device that is Bluetooth wireless interference to radio communications. However, there is no technology enabled. guarantee that interference will not occur in a particular installation. Getting Started: Please fully charge headset after removing it from the If this equipment does cause harmful interference to radio or package before beginning the pairing process. television reception, which can be determined by turning the ITEM# BH—M6 equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —6— Pairing the Headset: Troubleshooting: Pairing is the professional word for the process of General Functions: Charging The Headset: * Ensure that the headset has enough power, is turned on, connecting a Bluetooth wireless technology product to This headset includes a built—in Lithium Polymer battery. and has successfully been fully paired with the mobile a Bluetooth wireless technology enabled device. This Turning On: To charge the unit: device. process only needs to be completed one time with each Press and hold the muilti—function button for 5 seconds, 1. Plug the charger into proper outlet. * Ensure that the Bluetooth function on the phone is enabled. new device. indicator light will flash blue 3 times. 2. Plug the unit end of charger into the power outlet of * Be sure that the range between the headset and mobile NOTE: For the first 5 cycles of turning on the headset, the headset. Pairing to 1 device: headset will beep twice, and then flash blue 5 times, and device is less than 32 feet (10 meters), or that there is no 3. During charging, the indicator light will turn red. When 1. Press and hold the multi—function button for about 8 then two times. disturbances or electrical devices between the headset and charging is complete, the indicator light will shut off or flash seconds, until the indicator light alternates between blue and mobile device. Turning Off: red to alert you that the headset is fully charged. red, indicating that it is in pairing mode. * Headset indicator light is flashing red: Low battery Press and hold the multi—function button for 5 seconds, the 2. Activate the Bluetooth search feature on your phone, NOTE: * During charging indicator light does not illuminate: Leave headset will beep 3 times, and the indicator light will flash refer to your phone‘s manual for further instructions. * For first time use, make sure to fully charge the headset on charger for 20 more minutes and re—check. red 3 times. 3. Select BH—M6 from the searched device listing. at least for 4 hours, or preferably overnight (8—10 hours). * No sound coming from headset: 1. Make sure headset is 4. Enter pin code "0000" to confirm and finish pairing. The Voice Dialing: * If headset has not been used for more than 21 days, turned on, 2. Make sure headset was fully paired, 3. Make headset will flash just blue to indicate completed pairing. Press the multi—function button. recharge unit for at least 4 hours or preferably overnight sure distance between headset and device is less than 32 feet. Pairing to 2 devices: (8—10 hours). Redialing: This headset contains a dual—link function for connecting * Do not use the headset during charging. Headset Storage: Press the multi—function button twice. * Please only use original charger included in the packaging. with 2 mobile phones simultaneously. * Only use original included accessories with this device. * If indicator light flashes red during usage or while on 1. Pair the first phone following the steps above. Answering/Ending a Call: * Do not disassemble headset. It will void the warranty. standby, the battery is low, and you should recharge the unit 2. Temporarily turn off the first connected phone‘s Bluetooth Press the multi—function button once. * Store headset away from dust, heat, and water. as soon as possible. wireless technology function. * Use clean, soft, static—free cloth to clean headset surfaces. Mute On/Off: * Recharge unit only in places at room temperature. 3. Pair the second phone using the steps above. * Do not allow children to play or use headset. 4. Turn off the headset, and re—turn on the first phones Press and hold Volume (—) for 2—3 seconds. * Do not store headset or chargers in extreme environments. Wearing The Headset: Bluetooth wireless technology functionality. *Some functions may or may not work with certain phone models. See your This headset can be worn according to your preference, 5. Re—turn on the headset, and it will re—connect to both phone‘s manual for more information. just adjust the microphone. —5— devices automatically. 9 —3.


Document Created: 2011-09-19 16:35:20
Document Modified: 2011-09-19 16:35:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC