SZAWW180911002-01_SK-626AG_FCC_ID_Report

FCC ID: WOX-SK626AG

Test Report

Download: PDF
FCCID_4036564

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page1 of 33 Report No.: SZAWW180911002-01 FCC TEST REPORT For Shenzhen SQT Electronics Co., Ltd. 2.4GHz Wireless Keyboard Model No.: SK-626AG, SK-621AG, SK-641AG, SK-642AG, SK-643AG, SK-645AG Prepared For : Shenzhen SQT Electronics Co., Ltd. Address : ZhengChengFeng TechnologyZone Xinsha Road, ShaYi Village,Sha jing Town, Baoan Area, Shenzhen, China 518104 Prepared By : Shenzhen Anbotek Compliance Laboratory Limited Address : 1/F, Building D, Sogood Science and Technology Park, Sanwei community, Hangcheng Street, Bao'an District, Shenzhen, Guangdong, China.518102 Tel: (86) 755-26066440 Fax: (86) 755-26014772 Report Number : SZAWW180911002-01 Date of Receipt : Sept. 11, 2018 Date of Test : Sept. 11~25, 2018 Date of Report : Sept. 25, 2018 Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page2 of 33 Report No.: SZAWW180911002-01 Contents 1. General Information..................................................................................................................................................4 1.1. Client Information......................................................................................................................................... 4 1.2. Description of Device (EUT)........................................................................................................................ 4 1.3. Auxiliary Equipment Used During Test........................................................................................................ 4 1.4. Description of Test Modes.............................................................................................................................5 1.5. List of Channels............................................................................................................................................. 5 1.6. Description of Test Setup...............................................................................................................................6 1.7. Test Equipment List....................................................................................................................................... 7 1.8. Description of Test Facility........................................................................................................................... 8 2. Summary of Test Results.......................................................................................................................................... 9 3. Conducted Emission Test........................................................................................................................................10 3.1. Test Standard and Limit...............................................................................................................................10 3.2. Test Setup.....................................................................................................................................................10 3.3. Test Procedure..............................................................................................................................................10 3.4. Test Data...................................................................................................................................................... 10 4. Radiated Emission and Band Edge.........................................................................................................................11 4.1. Test Standard and Limit...............................................................................................................................11 4.2. Test Setup.....................................................................................................................................................11 4.3. Test Procedure..............................................................................................................................................13 4.4. Test Data...................................................................................................................................................... 13 5. 20dB Bandwidth Test..............................................................................................................................................23 5.1. Test Standard and Limit...............................................................................................................................23 5.2. Test Setup.....................................................................................................................................................23 5.3. Test Procedure..............................................................................................................................................23 5.4. Test Data...................................................................................................................................................... 23 6. Antenna Requirement............................................................................................................................................. 26 6.1. Test Standard and Requirement...................................................................................................................26 6.2. Antenna Connected Construction................................................................................................................ 26 APPENDIX I -- TEST SETUP PHOTOGRAPH.......................................................................................................27 APPENDIX II -- EXTERNAL PHOTOGRAPH....................................................................................................... 28 APPENDIX III -- INTERNAL PHOTOGRAPH.......................................................................................................32 Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page3 of 33 Report No.: SZAWW180911002-01 TEST REPORT Applicant : Shenzhen SQT Electronics Co., Ltd. Manufacturer : Shenzhen SQT Electronics Co., Ltd. Product Name : 2.4GHz Wireless Keyboard Model No. : SK-626AG, SK-621AG, SK-641AG, SK-642AG, SK-643AG, SK-645AG Trade Mark : N.A. Rating(s) : Input: DC 3V, 6mA "AA" Test Standard(s) : FCC Part15 Subpart C, Paragraph 15.249 Test Method(s) : ANSI C63.10: 2013 The device described above is tested by Shenzhen Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC Part 15 Subpart C requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Shenzhen Anbotek Compliance Laboratory Limited. Date of Test Sept. 11~25, 2018 Prepared by (Engineer / Oliay Yang) Reviewer (Supervisor / Snowy Meng) Approved & Authorized Signer (Manager / Sally Zhang) Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page4 of 33 Report No.: SZAWW180911002-01 1. General Information 1.1. Client Information Applicant : Shenzhen SQT Electronics Co., Ltd. ZhengChengFeng TechnologyZone Xinsha Road, ShaYi Village,Sha jing Town, Address : Baoan Area, Shenzhen, China 518104 Manufacturer : Shenzhen SQT Electronics Co., Ltd. ZhengChengFeng TechnologyZone Xinsha Road, ShaYi Village,Sha jing Town, Address : Baoan Area, Shenzhen, China 518104 Factory : Shenzhen SQT Electronics Co., Ltd. ZhengChengFeng TechnologyZone Xinsha Road, ShaYi Village,Sha jing Town, Address : Baoan Area, Shenzhen, China 518104 1.2. Description of Device (EUT) Product Name : 2.4GHz Wireless Keyboard Model No. : SK-626AG, SK-621AG, SK-641AG, SK-642AG, SK-643AG, SK-645AG (Note: All samples are the same except the model appearance, so we prepare "SK-626AG" for test only.) Trade Mark : N.A. Test Power Supply : DC 3V battery inside Test Sample No. : S1(Normal Sample), S2(Engineering Sample) Operation Frequency: 2408-2474MHz Number of Channel: 34 Channels Product : Modulation Type: FSK Description Antenna Type: PCB Antenna Antenna Gain(Peak): 0 dBi Remark: 1)For a more detailed features description, please refer to the manufacturer’s specifications or the User’s Manual. 1.3. Auxiliary Equipment Used During Test N/A Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page5 of 33 Report No.: SZAWW180911002-01 1.4. Description of Test Modes To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Description Mode 1 CH01 Mode 2 CH17 Mode 3 CH34 For Radiated Emission Final Test Mode Description Mode 1 CH01 Mode 2 CH17 Mode 3 CH34 Note: 1. The engineering test program was provided and the EUT was programmed to be in continuously transmitting mode. 2. EUT built-in battery-powered, fully-charged battery use of the test battery. 1.5. List of Channels Channel Freq. Channel Freq. Channel Freq. Channel Freq. (MHz) (MHz) (MHz) (MHz) 1 2408 10 2426 19 2444 28 2462 2 2410 11 2428 20 2446 29 2464 3 2412 12 2430 21 2448 30 2466 4 2414 13 2432 22 2450 31 2468 5 2416 14 2434 23 2452 32 2470 6 2418 15 2436 24 2454 33 2472 7 2420 16 2438 25 2456 34 2474 8 2422 17 2440 26 2458 9 2424 18 2442 27 2460 Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page6 of 33 Report No.: SZAWW180911002-01 1.6. Description of Test Setup RE 0.8m E-1 EUT Table Table 1.5m Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page7 of 33 Report No.: SZAWW180911002-01 1.7. Test Equipment List Cal. Item Equipment Manufacturer Model No. Serial No. Last Cal. Interval L.I.S.N. 1. Artificial Mains Rohde & Schwarz ENV216 100055 Nov. 17, 2017 1 Year Network 2. EMI Test Receiver Rohde & Schwarz ESCI 100627 Nov. 17, 2017 1 Year 3. RF Switching Unit Compliance Direction RSU-M2 38303 Nov. 17, 2017 1 Year 4. Spectrum Analysis Agilent E4407B US39390582 Nov. 17, 2017 1 Year MAX Spectrum 5. Agilent N9020A MY51170037 Nov. 18, 2017 1 Year Analysis 6. Preamplifier SKET Electronic BK1G18G30D KD17503 Nov. 17, 2017 1 Year Double Ridged Horn Instruments 7. GTH-0118 351600 Nov. 20, 2017 1 Year Antenna corporation Bilog Broadband 8. Schwarzbeck VULB9163 VULB 9163-289 Nov. 20, 2017 1 Year Antenna 9. Loop Antenna Schwarzbeck HFH2-Z2 100047 Nov. 17, 2017 1 Year 10. Horn Antenna Schewarzbeck BBHA9170 9170-375 Nov. 17, 2017 1 Year 11. Pre-amplifier SONOMA 310N 186860 Nov. 17, 2017 1 Year EMI Test Software 12. SHURPLE N/A N/A N/A N/A EZ-EMC RF Test Control 13. YIHENG YH3000 2017430 Nov. 18, 2017 1 Year System 14. Power Sensor DAER RPR3006W 15I00041SN045 Nov. 17, 2017 1 Year 15. Power Sensor DAER RPR3006W 15I00041SN046 Nov. 17, 2017 1 Year MXA Spectrum 16. Agilent N9020A MY51170037 Nov. 18, 2017 1 Year Analysis MXG RF Vector Signal 17. Agilent N5182A MY48180656 Nov. 18, 2017 1 Year Generator 18. Signal Generator Agilent E4421B MY41000743 Nov. 18, 2017 1 Year 19. DC Power Supply LW TPR-6410D 349315 Nov. 01, 2017 1 Year Constant Temperature 20. Sertep ZJ-HWHS80B ZJ-17042804 Nov. 01, 2017 1 Year Humidity Chamber Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page8 of 33 Report No.: SZAWW180911002-01 1.8. Description of Test Facility The test facility is recognized, certified, or accredited by the following organizations: FCC-Registration No.: 184111 Shenzhen Anbotek Compliance Laboratory Limited, EMC Laboratory has been registed and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No. 184111, July 31, 2017. ISED-Registration No.: 8058A-1 Shenzhen Anbotek Compliance Laboratory Limited, EMC Laboratory has been registered and fully described in a report filed with the (ISED) Innovation, Science and Economic Development Canada. The acceptance letter from the ISED is maintained in our files. Registration 8058A-1, June 13, 2016. Test Location Shenzhen Anbotek Compliance Laboratory Limited. 1/F, Building D, Sogood Science and Technology Park, Sanwei community, Hangcheng Street, Bao'an District, Shenzhen, Guangdong, China.518102 Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page9 of 33 Report No.: SZAWW180911002-01 2. Summary of Test Results Standard Section Test Item Result 15.203 Antenna Requirement PASS 15.207 Conducted Emission N/A 15.249 Radiated Emission PASS 15.215(c) 20dB Bandwidth PASS 15.249(c) Band Edge PASS Remark: “N/A” is an abbreviation for Not Applicable. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page10 of 33 Report No.: SZAWW180911002-01 3. Conducted Emission Test 3.1. Test Standard and Limit Test Standard FCC Part15 Section 15.207 Maximum RF Line Voltage (dBuV) Frequency Quasi-peak Level Average Level Test Limit 150kHz~500kHz 66 ~ 56 * 56 ~ 46 * 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Remark: (1) *Decreasing linearly with logarithm of the frequency. (2) The lower limit shall apply at the transition frequency. 3.2. Test Setup 3.3. Test Procedure The EUT system is connected to the power mains through a line impedance stabilization network (L.I.S.N.). This provides a 50ohm coupling impedance for the EUT system. Please refer the block diagram of the test setup and photographs. Both sides of AC line are checked to find out the maximum conducted emission. In order to find the maximum emission levels, the relative positions of equipment and all of the interface cables shall be changed according to FCC ANSI C63.10-2013 on Conducted Emission Measurement. The bandwidth of test receiver (ESCI) set at 9kHz. The frequency range from 150kHz to 30MHz is checked. 3.4. Test Data The EUT is powered by DC 3V battery inside, so there is no need to conduct this test. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page11 of 33 Report No.: SZAWW180911002-01 4. Radiated Emission and Band Edge 4.1. Test Standard and Limit Test Standard FCC Part15 C Section 15.209 and 15.205 Frequency Field strength Limit Measurement Remark (MHz) (microvolt/meter) (dBuV/m) distance (m) 0.009MHz~0.490MHz 2400/F(kHz) - - 300 0.490MHz-1.705MHz 24000/F(kHz) - - 30 1.705MHz-30MHz 30 - - 30 Test Limit 30MHz~88MHz 100 40.0 Quasi-peak 3 88MHz~216MHz 150 43.5 Quasi-peak 3 216MHz~960MHz 200 46.0 Quasi-peak 3 960MHz~1000MHz 500 54.0 Quasi-peak 3 500 54.0 Average 3 Above 1000MHz - 74.0 Peak 3 Remark: (1)The lower limit shall apply at the transition frequency. (2) 15.35(b), Unless otherwise specified, the limit on peak radio frequency emissions is 20dB above the maximum permitted average emission limit applicable to the equipment under test. This peak limit applies to the total peak emission level radiated by the device. Test Standard FCC Part15 C Section 15.249 Field Strength of Field Strength of Frequency Limit Measurement fundamental Harmonics Remark (MHz) (dBuV/m) distance (m) ((millivolts /meter) (microvolts/meter) 2400~2483.5 50 - 114.0 Peak 3 Test Limit 2400~2483.5 50 - 94.0 Average 3 2400~2483.5 - 500 74.0 Peak 3 2400~2483.5 - 500 54.0 Average 3 Remark: (1) 15.35(b), Unless otherwise specified, the limit on peak radio frequency emissions is 20dB above the maximum permitted average emission limit applicable to the equipment under test. This peak limit applies to the total peak emission level radiated by the device. 4.2. Test Setup Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page12 of 33 Report No.: SZAWW180911002-01 Figure 1. Below 30MHz Figure 2. 30MHz to 1GHz Figure 3. Above 1 GHz Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page13 of 33 Report No.: SZAWW180911002-01 4.3. Test Procedure For below 1GHz: The EUT is placed on a turntable, which is 0.8m above the ground plane. For above 1GHz: The EUT is placed on a turntable, which is 1.5m above the ground plane. The turn table can rotate 360 degrees to determine the position of the maximum emission level. The EUT is set 3 meters away from the receiving antenna which is mounted on a antenna tower. The antenna can be moved up and down from 1 to 4 meters to find out the maximum emission level. Rotated the EUT through three orthogonal axes to determine the maximum emissions, both horizontal and vertical polarization of the antenna are set on test. The EUT is tested in 9*6*6 Chamber. The device is evaluated in xyz orientation. For the radiated emission test above 1GHz: Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. For 9kHz to 150kHz, Set the spectrum analyzer as: RBW = 200Hz, VBW =1kHz, Detector= Quasi-Peak, Trace mode= Max hold, Sweep- auto couple. For 150kHz to 30MHz, Set the spectrum analyzer as: RBW = 9KHz, VBW =30kHz, Detector= Quasi-Peak, Trace mode= Max hold, Sweep- auto couple. For 30MHz to 1000MHz, Set the spectrum analyzer as: RBW = 100kHz, VBW =300kHz, Detector= Quasi-Peak, Trace mode= Max hold, Sweep- auto couple. . For above 1GHz,Set the spectrum analyzer as: RBW =1MHz, VBW =1MHz, Detector= Peak, Trace mode= Max hold, Sweep- auto couple. RBW =1MHz, VBW =10Hz, Detector= Average, Trace mode= Max hold, Sweep- auto couple. 4.4. Test Data PASS During the test, Pre-scan all kind of the place mode (X-axis, Y-axis, Z-axis), and found the X-axis is the worst case. The test results of 9kHz-30MHz was attenuated more than 20dB below the permissible limits, so the results don't record in the report. During the test, pre-scan all the mode, and found the Middle channel which is the worst case, only the worst case is recorded in the report Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page14 of 33 Report No.: SZAWW180911002-01 Test Results (30~1000MHz) Job No.: SZAWW180911002-01 Temp.(℃)/Hum.(%RH): 23.4℃/49%RH Standard: FCC PART 15C Power Source: DC 3V battery inside Test Mode: Mode 2 Polarization: Horizontal Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page15 of 33 Report No.: SZAWW180911002-01 Test Results (30~1000MHz) Job No.: SZAWW180911002-01 Temp.(℃)/Hum.(%RH): 23.4℃/49%RH Standard: FCC PART 15C Power Source: DC 3V battery inside Test Mode: Mode 2 Polarization: Vertical Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page16 of 33 Report No.: SZAWW180911002-01 Test Results (1GHz-25GHz) Test Mode: CH01 (Low channel) Antenna Preamp Frequency Read Level Cable Loss Level Limit Over Limit Factor Factor Pol. Detector (MHz) (dBuV) (dB) (dBuV/m) (dBuV/m) (dB) (dB/m) (dB) 2408.0000 94.74 31.12 2.18 35.33 92.71 114.00 -21.29 V Peak 2408.0000 84.17 31.12 2.18 35.33 82.14 94.00 -11.86 V AVG 4816.0000 47.87 34.01 2.58 34.65 49.81 74.00 -24.19 V Peak 4816.0000 38.84 34.01 2.58 34.65 40.78 54.00 -13.22 V AVG 7224.0000 48.31 36.16 2.97 35.07 52.37 74.00 -21.63 V Peak 7224.0000 37.70 36.16 2.97 35.07 41.76 54.00 -12.24 V AVG 9632.0000 * 12040.0000 * 14448.0000 * 16856.0000 * 2408.0000 95.90 31.12 2.18 35.33 93.87 114.00 -20.13 H Peak 2408.0000 82.27 31.12 2.18 35.33 80.24 94.00 -13.76 H AVG 4816.0000 47.32 34.01 2.58 34.65 49.26 74.00 -24.74 H Peak 4816.0000 40.17 34.01 2.58 34.65 42.11 54.00 -11.89 H AVG 7224.0000 47.28 36.16 2.97 35.07 51.34 74.00 -22.66 H Peak 7224.0000 38.89 36.16 2.97 35.07 42.95 54.00 -11.05 H AVG 9632.0000 * 12040.0000 * 14448.0000 * 16856.0000 * Note: 1. Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. “*” means the test results were attenuated more than 20dB below the permissible limits, so the results don't record in the report. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page17 of 33 Report No.: SZAWW180911002-01 Test Mode: CH17 (Middle channel) Antenna Preamp Frequency Read Level Cable Loss Level Limit Over Limit Factor Factor Pol. Detector (MHz) (dBuV) (dB) (dBuV/m) (dBuV/m) (dB) (dB/m) (dB) 2440.0000 94.86 31.12 2.20 34.51 93.67 114.00 -20.33 V Peak 2440.0000 82.56 31.22 2.20 34.51 81.47 94.00 -12.53 V AVG 4880.0000 50.05 34.98 2.49 34.14 53.38 74.00 -20.62 V Peak 4880.0000 38.44 34.98 2.49 34.14 41.77 54.00 -12.23 V AVG 7320.0000 45.32 36.01 3.01 34.56 49.78 74.00 -24.22 V Peak 7320.0000 38.85 36.01 3.01 34.56 43.31 54.00 -10.69 V AVG 9760.0000 * 12200.0000 * 14640.0000 * 17080.0000 * 2440.0000 95.84 31.12 2.20 34.51 94.65 114.00 -19.35 H Peak 2440.0000 82.33 31.12 2.20 34.51 81.14 94.00 -12.86 H AVG 4880.0000 47.93 34.98 2.49 34.14 51.26 74.00 -22.74 H Peak 4880.0000 38.71 34.98 2.49 34.14 42.04 54.00 -11.96 H AVG 7320.0000 45.04 36.01 3.01 34.56 49.50 74.00 -24.50 H Peak 7320.0000 35.56 36.01 3.01 34.56 40.02 54.00 -13.98 H AVG 9760.0000 * 12200.0000 * 14640.0000 * 17080.0000 * Note: 1. Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. “*” means the test results were attenuated more than 20dB below the permissible limits, so the results don't record in the report. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page18 of 33 Report No.: SZAWW180911002-01 Test Mode: CH34 (High channel) Antenna Preamp Frequency Read Level Cable Loss Level Limit Over Limit Factor Factor Pol. Detector (MHz) (dBuV) (dB) (dBuV/m) (dBuV/m) (dB) (dB/m) (dB) 2474.0000 93.44 31.65 2.23 36.07 91.25 114.00 -22.75 V Peak 2474.0000 84.92 31.65 2.23 36.07 82.73 94.00 -11.27 V AVG 4948.0000 47.26 35.06 2.60 34.93 49.99 74.00 -24.01 V Peak 4948.0000 39.49 35.06 2.60 34.93 42.22 54.00 -11.78 V AVG 7422.0000 45.45 36.19 3.12 35.11 49.65 74.00 -24.35 V Peak 7422.0000 38.23 36.19 3.12 35.11 42.43 54.00 -11.57 V AVG 9896.0000 * 12370.0000 * 14844.0000 * 17318.0000 * 2474.0000 95.14 31.65 2.23 36.07 92.95 114.00 -21.05 H Peak 2474.0000 85.53 31.65 2.23 36.07 83.34 94.00 -10.66 H AVG 4948.0000 47.73 35.06 2.60 34.93 50.46 74.00 -23.54 H Peak 4948.0000 41.77 35.06 2.60 34.93 44.50 54.00 -9.50 H AVG 7422.0000 46.89 36.19 3.12 35.11 51.09 74.00 -22.91 H Peak 7422.0000 36.16 36.19 3.12 35.11 40.36 54.00 -13.64 H AVG 9896.0000 * 12370.0000 * 14844.0000 * 17318.0000 * Note: 1. Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. “*” means the test results were attenuated more than 20dB below the permissible limits, so the results don't record in the report. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page19 of 33 Report No.: SZAWW180911002-01 Radiated Band Edge: Test Mode: CH01 Test channel: Lowest Peak Value(Vertical) Peak Value(Horizontal) Average Value(Vertical) Average Value(Horizontal) Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page20 of 33 Report No.: SZAWW180911002-01 Test Mode: CH34 Test channel: Highest Peak Value(Vertical) Peak Value(Horizontal) Average Value(Vertical) Average Value(Horizontal) Remark: 1. Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page21 of 33 Report No.: SZAWW180911002-01 Conducted Emission Method CH: Low CH: Middle Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page22 of 33 Report No.: SZAWW180911002-01 CH: High Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page23 of 33 Report No.: SZAWW180911002-01 5. 20dB Bandwidth Test 5.1. Test Standard and Limit Test Standard FCC Part15 C Section 15.249 5.2. Test Setup 5.3. Test Procedure 1. Place the EUT on the table and set it in the transmitting mode. 2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 3. Set the spectrum analyzer as: RBW = 30kHz, VBW≥3*RBW =100kHz, Detector= Average Trace mode= Max hold. Sweep- auto couple. 4. Mark the peak frequency and –20dB (upper and lower) frequency. 5. Repeat until all the rest channels are investigated. 5.4. Test Data Test Item : 20dB Bandwidth Test Mode : Mode 1 Test Voltage : DC 3V battery inside Temperature : 24℃ Test Result : PASS Humidity : 55%RH Frequency Bandwidth Result (MHz) (kHz) 2408MHZ 2064 PASS 2440MHZ 2067 PASS 2474MHZ 2065 PASS Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page24 of 33 Report No.: SZAWW180911002-01 Test Mode: Low Test Mode: Middle Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page25 of 33 Report No.: SZAWW180911002-01 Test Mode: High Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page26 of 33 Report No.: SZAWW180911002-01 6. Antenna Requirement 6.1. Test Standard and Requirement Test Standard FCC Part15 Section 15.203 1) 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently Requirement attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 6.2. Antenna Connected Construction The antenna is a PCB Antenna which permanently attached, and the best case gain of the antenna is 0 dBi. It complies with the standard requirement. Antenna Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: WOX-SK626AG Page27 of 33 Report No.: SZAWW180911002-01 APPENDIX I -- TEST SETUP PHOTOGRAPH Photo of Radiation Emission Test Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Anbotek Product Safety s 2 10 & IM

Anbotek Product Safety 6 °7 8 9 1 gy & 10 im 1 2.3 4 5 6 7 a 9 111213141518 17 4

Anbotek Product Safety se — 4 ap 1 2 3 eaaniienee 4 5 M 6 7 yi®. « \ 8 9 10 11213414 t‘;i6A

Anbotek Product Safety > s 4 s 6 7 a s 10111213 14151617 181920 2122 23 24 25 267. 2079 26 111213 14181617 18 19 2122 23 rARSRSTT ATBRORNS

Anbotek Product Safety o

Anbotek Product Safety


Document Created: 2018-10-10 19:18:46
Document Modified: 2018-10-10 19:18:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC