MPE Report

FCC ID: WOR-6115P

RF Exposure Info

Download: PDF
FCCID_2067183

                                            FCC ID:WOR-6115P                             Report No.:T121206S02-RP1



APPENDIX I MAXIMUM PERMISSIBLE EXPOSURE

   According to FCC 1.1310 : The criteria listed in the following table shall be used to
   evaluate theenvironment impact of human exposure to radio frequency (RF) radiation as
   specified in 1.1307(b)LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)
      Frequency
                      Electric Field     Magnetic Field Power Density
        Range                                                               Average Time
                      Strength (V/m) Strength (A/m)            (mW/cm2)
        (MHz)
                         (A) Limits for Occupational / Control Exposures
      300-1,500               --                --               F/300           6
    1,500-100,000             --                --                 5             6
                    (B) Limits for General Population / Uncontrol Exposures
      300-1,500               --                --              F/1500           6
    1,500-100,000             --                --                 1             30



   CALCULATIONS
                    30 × P × G          E2
   Given       E=              & S=
                       d               3770
         Where E = Field strength in Volts / meter
               P = Power in Watts
               G = Numeric antenna gain
               d = Distance in meters
               S = Power density in milliwatts / square centimeter
   Combining equations and re-arranging the terms to express the distance as a function of
   the remaining variables yields:
                            30 × P × G
                       S=
                             3770d 2
   Changing to units of mW and cm, using:
                        P (mW) = P (W) / 1000 and
                        d (cm) = d(m) / 100
   Yields
                            30 × (P / 1000) × G            P×G
                       S=                     2 = 0.0796 ×
                             3770 × (d / 100)               d2
            Where d = Distance in cm
                  P = Power in mW
                  G = Numeric antenna gain
                  S = Power density in mW / cm2



                                                       Page 1 / 2
This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc.


                                             FCC ID:WOR-6115P                            Report No.:T121206S02-RP1

   LIMIT
   Power Density Limit, S=1.0mW/cm2


   TEST RESULTS

                                            Minimum          Numeric   Power    Power
                                   Antenna            Output
                                           separation        antenna Density   Density
              Mode                  Gain              Power
                                            distance           gain    Limit   at 20cm
                                    (dBi)             (dBm)
                                              (cm)            (mW)   (mW/cm2) (mW/cm2)

         IEEE 802.11b                 2.00              20           21.19         1.58             1.00         0.041469

         IEEE 802.11g                 2.00              20           24.50         1.58             1.00         0.088863

     IEEE 802.11n HT20                2.00              20           24.05         1.58             1.00         0.080116

     IEEE 802.11n HT40                2.00              20           23.32         1.58             1.00         0.067720
   Remark: For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm2 even if
          the calculation indicates that the power density would be larger.




                                                       Page 2 / 2
This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc.



Document Created: 2013-08-13 15:21:19
Document Modified: 2013-08-13 15:21:19

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC