Test Report

FCC ID: WNG-TXP-11

Test Report

Download: PDF
FCCID_4381292

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Rondish Company Limited Pendent Transmitter TXP-11 FCC ID: WNG-TXP-11 Prepared for : Rondish Company Limited Unit G&H, 4/F, Block 1, Kwai Tak Ind. Ctr. 15-33 Kwai Tak St., Kwai Chung, N.T., Hong Kong Prepared By : Audix Technology (Shenzhen) Co., Ltd. No. 6, Kefeng Road, Science & Technology Park, Nanshan District , Shenzhen, Guangdong, China Tel: (0755) 26639496 Report Number ： ACS-F19093 Date of Test ： May.10~Jun.05,2019 Date of Report ： Jun.24,2019 Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 1 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 TABLE OF CONTENTS Description Page 1. SUMMARY OF STANDARDS AND RESULTS ............................................................. 4 1.1. Description of Standards and Results ...................................................................................... 4 2. GENERAL INFORMATION ............................................................................................ 5 2.1. Description of Device (EUT)................................................................................................... 5 2.1. EUT Configuration and operation conditions for test ............................................................. 6 2.2. Test Facility ............................................................................................................................. 6 2.3. Measurement Uncertainty (95% confidence levels, k=2) ........................................................ 6 3. POWER LINE CONDUCTED EMISSION TEST .......................................................... 7 4. RADIATED EMISSION TEST ......................................................................................... 8 4.1. Test Equipment ........................................................................................................................ 8 4.2. Block Diagram of Test Setup .................................................................................................. 9 4.3. Radiated Emission Limit ....................................................................................................... 10 4.4. EUT Configuration on Test ................................................................................................... 10 4.5. Operating Condition of EUT ................................................................................................. 10 4.6. Test Procedure ....................................................................................................................... 10 4.7. Radiated Emission Test Results............................................................................................. 10 5. STOP TRANSMITTING TIME TEST ........................................................................... 15 5.1. Test Equipment ...................................................................................................................... 15 5.2. Limit ...................................................................................................................................... 15 5.3. Test Results............................................................................................................................ 15 6. CEASE TIME AFTER ACTIVATION TEST ............................................................... 16 6.1. Test Equipment ...................................................................................................................... 16 6.2. Limit ...................................................................................................................................... 16 6.3. Test Result ............................................................................................................................. 16 7. 20 DB BANDWIDTH TEST ............................................................................................ 17 7.1. Test Equipment ...................................................................................................................... 17 7.2. Limit ...................................................................................................................................... 17 The bandwidth of the emission shall be no wider than 0.25% of the center frequency. .................. 17 7.3. Test Results............................................................................................................................ 17 8. ANTENNA REQUIREMENT ......................................................................................... 18 9. RADIO FRREQUENCY EXPOSURE COMPLIANCE ............................................... 19 10. DEVIATION TO TEST SPECIFICATIONS ................................................................. 20 11. PHOTOGRAPH OF TEST .............................................................................................. 21 11.1. Photos of Radiated Emission Test ......................................................................................... 21 12. PHOTOGRAPH OF EUT ................................................................................................ 22 Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 2 of 28

® AU D IX AUDIX Technology(Shenzhen) Co., Ltd. FCC ID:WNG—TXP—11 TEST REPORT CERTIFICATION Applicant : Rondish Company Limited Manufacturer * Rondish Company Limited Product * Pendent Transmitter FCCID _ WNG—TXP—11 (A)Model No. : TXP—11 (B)Power Supply _: DC3V (C)Test Voltage _: DC3V Tested for comply with: FCC CFR47 Part 15 Subpart C Test procedure used: ANSI C63.10: 2013 The device described above is tested by AUDIX TECHNOLOGY (SHENZHEN) CO., LTD. to confirm comply with all the FCC Part 15 Subpart C requirements. The test results are contained in this test report and AUDIX TECHNOLOGY (SHENZHEN) CO., LTD. is assumed full responsibility for the accuracy and completeness of these tests. This report contains data that are not covered by the NVLAP accreditation. Also, this report shows that the Equipment Under Test (EUT) is to be technically compliant with the FCC requirements. This report applies to above tested sample only. This report shall not be reproduced in part without written approval of AUDIX TECHNOLOGY (SHENZHEN) CO., LTD. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. Date of Test : May.10~Jun.05,2019 Report of date: Jun.24,2019 Prepared by : B V(M/CZ Reviewed by : Brave Zhang / Asgistant mo f*##& (K#®) 4#1ma : AUD‘# Audix Technology (SLcuzhen) Co., Ltd. EMC # M # c q nor Stamp only for EMC Dept. Report Approved & Authorized Signer : Signature: L Audix Technology (Shenthen) Co., Ltd. Report No. ACS—F19093 page 3 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 1. SUMMARY OF STANDARDS AND RESULTS 1.1.Description of Standards and Results The EUT has been tested according to the applicable standards as referenced below. EMISSION Description of Test Item Standard Results FCC Part 15C: 15.207 Conducted Emission Test N/A ANSI C63.10: 2013 FCC Part 15C: 15.231(b) Radiated Emission Test PASS ANSI C63.10: 2013 FCC Part 15C: Stop Transmitting Time Test PASS 15.231(a)(1) FCC Part 15C: Cease Time After Activation PASS 15.231(a)(2) 20 dB Bandwidth Test FCC Part 15C: 15.231(c) PASS N/A is an abbreviation for Not Applicable. Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 4 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 2. GENERAL INFORMATION 2.1.Description of Device (EUT) Product : Pendent Transmitter Model No. : TXP-11 FCC ID : WNG-TXP-11 Operation frequency : 433.92MHz Applicant : Rondish Company Limited Unit G&H, 4/F, Block 1, Kwai Tak Ind. Ctr. 15-33 Kwai Tak St., Kwai Chung, N.T., Hong Kong Manufacturer : Rondish Company Limited Unit G&H, 4/F, Block 1, Kwai Tak Ind. Ctr. 15-33 Kwai Tak St., Kwai Chung, N.T., Hong Kong Antenna Type : Antenna Type: PCB Antenna, 0dBi gain. &Gain Date of Test : May.10~Jun.05,2019 Date of Receipt : Apr.12,2019 Sample Type : Prototype production Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 5 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 2.1. EUT Configuration and operation conditions for test EUT (EUT: Pendent Transmitter) 2.2.Test Facility Site Description Audix Technology (Shenzhen) Co., Ltd. Name of Firm : No. 6, Kefeng Road, Science & Technology Park, Nanshan District , Shenzhen, Guangdong, China Certificated by Industry Canada EMC Lab. : Registration Number: IC 5183A-1 Valid Date: May.07, 2020 Certificated by DAkkS, Germany : Registration No: D-PL-12151-01-00 Valid Date: Dec.07, 2021 Accredited by NVLAP, USA : NVLAP Code: 200372-0 Valid Date: Mar.31, 2020 Certificated by FCC USA. : Designation No.: CN5022 Valid Date: Mar.31, 2020 2.3.Measurement Uncertainty (95% confidence levels, k=2) Test Item Uncertainty 4.0dB(30~200MHz, Polarization: H) Uncertainty for Radiation Emission test 4.0dB(30~200MHz, Polarization: V) in 3m chamber 4.4dB(200M~1GHz, Polarization: H) 4.4dB(200M~1GHz, Polarization: V) 5.0dB (1~6GHz, Distance: 3m) Uncertainty for Radiation Emission test in 5.4dB (6~18GHz, Distance: 3m) 3m chamber 5.4dB (Above 18GHz, Distance: 3m) Uncertainty for Radiated Spurious 3.6dB Emission test in RF chamber Uncertainty for Conduction Spurious 2.0dB emission test Uncertainty for Output power test 0.8dB Uncertainty for Bandwidth test 83kHz Uncertainty for DC power test 0.1 % Uncertainty for test site temperature and 0.6℃ humidity 3% Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 6 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 3. POWER LINE CONDUCTED EMISSION TEST According to Paragraph (c) of FCC Part 15 section 15.231, Tests to demonstrate compliance with the conducted limits are not required for devices which only employ battery power for operation and which do not operate from the AC power lines or contain provisions for operation while connected to the AC power lines. Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 7 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 4. RADIATED EMISSION TEST 4.1.Test Equipment Frequency range: 30~1000MHz Cal. Item Equipment Manufacturer Model No. Serial No. Last Cal. Interval 1. 3#Chamber AUDIX N/A N/A Jun.19,18 1 Year 2. Signal Analyzer Rohde & Schwarz FSV30 104050 Apr.14,19 1 Year 3. EMI Test Receiver Rohde & Schwarz ESR7 101547 Apr.14,19 1 Year 4. Amplifier HP 8447D 2648A04738 Apr.14,19 1 Year Tri-log-Broadband 5. SCHWARZBECK VULB 9168 710 Aug.22,18 1 Year Antenna 6. NSA Cable HUBER+SUHNER CFD400NL-LW No.3 Dec.01,18 1 Year 7. Coaxial Switch Anritsu MP59B 6201397222 Apr.14,19 1 Year 8. Test Software AUDIX e3 6.2009-5-21a(n) N/A N/A Note: N/A means Not applicable. Frequency range: above 1000MHz Cal. Item Equipment Manufacturer Model No. Serial No. Last Cal. Interval 1. 3#Chamber AUDIX N/A N/A May.17,18 1 Year 2. Signal Analyzer Rohde & Schwarz FSV30 104050 Apr.14,19 1 Year 3. Horn Antenna ETC MCTD 1209 DRH15F03007 May.30,18 1 Year 4. Amplifier Agilent 83017A MY53270084 Oct.14,18 1 Year 5. RF Cable Hubersuhner SUCOFLEX106 505238/6 Apr.13,19 1 Year 6. Test Software AUDIX e3 6.2009-5-21a(n) N/A N/A Note: N/A means Not applicable. Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 8 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 4.2.Block Diagram of Test Setup For frequency range 30MHz-1000MHz Semi-anechoic 3m Chamber ANTENNA ELEVATION VARIES FROM 1 TO 4 METERS 3m EUT 0.8m TURN TABLE 2.0m(L)*1.0m(W)*0.8m(H) (FIBRE GLASS) Coaxial Switch AMP Spectrum Analyzer PC System Receiver For frequency range above 1GHz Semi-anechoic 3m Chamber ANTENNA ELEVATION VARIES FROM 1 TO 4 METERS 3m EUT (Reference Point) 1.0m(L)*1.0m(W)*1.5m(H) TURN TABLE 1.5m ABSORBER (Styrene) (30cm maximum) (30cm) AMP Spectrum Analyzer PC System Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 9 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 4.3.Radiated Emission Limit All emanations from a Class B computing devices or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified below: Fundamental Field Strength of Field Strength of Spurious Frequency(MHz) Fundamental emissions 433.92 QP:80.83dBuV/m at 3m AV:60.83dBuV/m at 3m distance distance (Above 1GHz) PK:80.83dBuV/m at 3m distance (Above 1GHz) QP:60.83dBuV/m at 3m distance (Below 1GHz) Note: The spurious emissions appearing within the frequency band listed in 15.205 Shall also comply with limits shown in section 15.209 4.4.EUT Configuration on Test The following equipment are installed on Radiated Emission Test to meet the commission requirements and operating regulations in a manner which tends to maximize its emission characteristics in normal application. 4.5.Operating Condition of EUT 4.5.1.Setup the EUT and simulator as shown as Section 4.2. 4.5.2.Turn on the power of all equipments. 4.5.3.Let EUT work in Tx mode. 4.6.Test Procedure The EUT and its simulators are placed on a turn table, which is 0.8 meter high above ground. The turn table can rotate 360 degrees to determine the position of the maximum emission level. The EUT is set 3 meters away from the receiving antenna, which is mounted on a antenna tower. The antenna can be moved up and down between 1 meter and 4 meters to find out the maximum emission level. Broadband antenna (calibrated bilog antenna) is used as receiving antenna. Both horizontal and vertical polarization of the antenna is set on Test. In order to find the maximum emission levels, all of the interface cables must be manipulated according to ANSI C63.10-2013 on radiated emission Test. During the pretest the EUT was rotated through three orthogonal axes to determine the attitude that maximizes the emissions. After that the EUT was manually handled to find the orientation that has the maximum emission, which is the orientation show in the test setup photos. The bandwidth of the EMI test receiver (R&S ESR7) is set at 120kHz for frequency range from 30MHz to 1000MHz. The bandwidth of the Spectrum’s RBW is set at 1MHz and VBW is set at 3MHz for peak emissions measurement above 1GHz This device is pulse modulated; a duty cycle factor was used to calculate average level based measured peak level. 4.7.Radiated Emission Test Results PASS. Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 10 of 28

Dates He: E22010 Report DataFfRonashcsmokie.re.emo () .Loz anim pateczoroosm is too stzmiiszaz on m [ ®% ze vs. on Ca on Frequency (itio size no. 3m Chanber baza no. i s Dis. / Ans. on 2010 vtsorse—70 Ane. po. nontzoumit pamie ree as.ess aso.se or Emv. / ms. as.ono/s5+ Enginee Andy zur Pendent Teansnister MiiTiPoi1 Pover rating : Do 37 Test moge Tx noas ane. canie Emssion wo. Preq. Fector loss Reading Level Limito: Margin Renark grre . (abe (ab) (duw) (deu/ag (abww/a) (a9) 10 ass.seo as.eo alas ~ouer couae asuso 2o.00 or a ass.seo melss s.e0 asuso mds soues Suso or 3 eee.370 re.ss auon couse seurr asuoo aoues or 1. Entssion Level: Antemna Factor + Cable Loss + Reading. 2. The emission levels that are 204 belov the official Aimit are not reported.

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 12 of 28

He:F:2019 ReporttEMbiincstoomoot.cis (2) m parerzot.0s.10 son sea ce pai15c PeRK 700 in se0 : Ece pait 15c A soo i ano soo 200 100 oo To: To: To sov. sove Frequency (itle site no. an Chasber basa no. 2 pss. / Ane. oc am 2or8 mem1209—3007 ame. pou. : nontzonmat bimie ree rant is reax rre Bav. / ms. c 2sne/snn Enginess : carey m rendent Transmscter Mirtiz—i1 Pover: rating : bo 1050 Tess toas T% toae Ane. canie m Ensssson No. Freq. astor: Loss tector Reading Level Limits: argin Resark gre (abe (ae) (ab) (abw) (abww/ag (abww/a) (a9) 10 anas.0o gecas uts aouso 4650 Anuen 74.00. 92249 Peak a eave.oo av.sa o.es ozltr 39.35 94.92. 54.00.— 19.08. Average 3 eave.oo av.sa oes orltr soas ssu76 74.00 18.24. Peak a asos.00 ee.as o9r orlss as.0e 41275 74.00 32.25. Peak renazks Eniasion Level= Antenna Factor + Cable Loss + Reading ~Amp Factor 2« The emission levels that are 204 belov the official Aimit are not reported.

Datect rie:Fr2oto Report iiibiincstoonoo.ems (2) .otevet @ewim parerzot.0s.10 son seol iccomer jsc perw 700 sn se0 reemgr ise ay soo —san anol s0o 200 100 oo To: To: To sov. sove Frequency tittn site no. an Chasber baea no. 1 pss. / Ane. am 2or8 mem1209—3007 ame. pou. : vertican bimie ree rant is reax rre Bav. / ms. c 2sne/snn Enginess : carey m Pendnt Transmstter Mintiz—i Pover: rating : bo 1050 Tess toas T% toae Ane. canie m Ensssson wo. Freq. Fector Loss fector meading Level Linits: Margin Resark gre (abe (ae) (ab) (abw) (abww/ag (abww/a) (a9) 10— as00.00 2s.os ouse an.so asls8 am.ee 24.00 asla2 reak a eanoloo aviss oles arlor aecee anuer 26.00 30.39. reak Eniasion Level Anterna Factor + Cable Loss + Reading ~Amp Factor 2« The emission levels that are 204 belov the official Aimit are not reported.

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 5. STOP TRANSMITTING TIME TEST 5.1. Test Equipment Cal. Item Equipment Manufacturer Model No. Serial No. Last Cal. Interval 1. EMC Analyzer Agilent N9030A MY51380221 Sep.08,18 1 Year 5.2. Limit Per Part 15.231(a)(1): A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. 5.3. Test Results EUT: Wireless Call Point transmitters M/N: WCP-11 Test Date: 2019-06-05 Pressure: 101.2±1.0 kpa Humidity: 52.1±3.0% Tested By: Lynn Test Site: RF site Temperature:22.9±0.6℃ Frequency Test Stop Transmitting Time Limit (MHz) Mode (s) (s) 433.92 Tx 2.490 <5 Conclusion：PASS Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 15 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 6. CEASE TIME AFTER ACTIVATION TEST 6.1. Test Equipment Cal. Item Equipment Manufacturer Model No. Serial No. Last Cal. Interval 1. EMC Analyzer Agilent N9030A MY51380221 Sep.08,18 1 Year 6.2. Limit Per Part 15.231(a)(2): A transmitter activated automatically shall cease transmission within 5 seconds after activation. 6.3. Test Result EUT: Wireless Call Point Transmitter M/N: WCP-11 Test Date: 2019-06-05 Pressure: 101.4±1.0 kpa Humidity: 52.7±3.0% Tested By: Lynn Test Site: RF site Temperature:22.3±0.6℃ Cease Time After Frequency Test Limit Activation (MHz) Mode (s) (s) 433.92 Tx 2.150 <5 Conclusion：PASS Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 16 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 7. 20 DB BANDWIDTH TEST 7.1. Test Equipment Item Equipment Manufacturer Model No. Serial No. Last Cal. Cal. Interval PXA Signal 1. Agilent N9030A MY51380221 Sep.08,18 1Year Analyzer 2. Attenuator Agilent 8491B MY39269170 Oct.14,18 1 Year 3. RF Cable Hubersuhner SUCOFLEX106 505239/6 Apr.13,19 1 Year 7.2. Limit The bandwidth of the emission shall be no wider than 0.25% of the center frequency. 7.3. Test Results EUT: Wireless Call Point Transmitter M/N: WCP-11 Test Date: 2019-05-10 Pressure: 101.2±1.0 kpa Humidity: 52.1±3.0% Tested By: Lynn Test Site: RF site Temperature:22.9±0.6℃ Frequency Test -20dB Bandwith Limit (MHz) Mode (kHz) (MHz) 433.92 Tx 49.99 <1.0848 Conclusion：PASS Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 17 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 8. ANTENNA REQUIREMENT RESULT : PASS Test Date : May.10~Jun.05,2019 Test standard : FCC Part 15.231 Limit : the use of antennas with directional gains that do not exceed 6 dBi According to the manufacturer declared, the EUT has an PCB antenna, the directional gain of antenna is 0dBi, and the antenna connector is designed with permanent attachment and no consideration of replacement. Therefore the EUT is considered sufficient to comply the provision. Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 18 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 9. RADIO FRREQUENCY EXPOSURE COMPLIANCE RESULT : PASS Test standard : FCC KDB Publication 447498 D01 V06 Since maximum peak output power of the transmitter is<10mW, i.e.0.0042mW<10mW, hence the EUT is excluded from SAR evaluation according to FCC KDB Publication 447498 D01: General RF Exposure Guidance V06. Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 19 of 28

AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:WNG-TXP-11 10. DEVIATION TO TEST SPECIFICATIONS [NONE] Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F19093 page 20 of 28


Document Created: 2019-07-23 14:04:47
Document Modified: 2019-07-23 14:04:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC