RF Exposure Report Appendix Dipole

FCC ID: WIYMP200

RF Exposure Info

Download: PDF
FCCID_2566293

F ; wl uj Calibration . LabOrafory of aN s >4 fAN Schweizerischer Kalibrierdienst Schmid & Partner iiaé-fl'/{& Service suisse d‘étalonnage Engineering AG — — Tooy Ser-vizio s?lizze-ro di tarfatura Zeughausstrasse 43, 8004 Zurich, Switzerland *///-?\9‘ Swiss Calibration Service tnitabs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client CCS—TW (Auden) Certificate No: D2450V2—728_May14 |CALIBRATION CERTIFICATE Object D2450V2 — SN: 728 Calibration procedure(s) QA CAL—05.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date: May 20, 2014 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 09—Oct—13 (No. 217—01827) Oct—14 Power sensor HP 8481A US37292783 09—Oct—13 (No. 217—01827) Oct—14 Power sensor HP 8481A MY41092317 09—Oct—13 (No. 217—01828) Oct—14 Reference 20 dB Attenuator SN: 5058 (20k) 03—Apr—14 (No. 217—01918) Apr—15 Type—N mismatch combination SN: 5047.2 / 06327 03—Apr—14 (No. 217—01921) Apr—15 Reference Probe ESSDV3 SN: 3205 30—Dec—13 (No. ES3—3205_Dec13) Dec—14 DAE4 SN: 601 30—Apr—14 (No. DAE4—601_Apri4) Apr—15 Secondary Standards ID # Check Date (in house) Scheduled Check RF generator R&S SMT—06 100005 04—Aug—99 (in house check Oct—13) In house check: Oct—16 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—13) In house check: Oct—14 Name Function Signatur Calibrated by: Claudio Leubler Laboratory Technician Technical Manager // Approved by: Katia Pokovic Issued: May 21, 2014 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D2450V2—728_May14 Page 1 of 8

Calibration Laboratory of NU Tz Schweizerischer Kalibrierdienst Schmid & Partner iifi/fi Service suisse d‘étalonnage Engineering AG ;/7_—\\\? Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland *4’I/f-\\\“\é Swiss Calibration Service "thilubs Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. «_ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D2450V2—728_May14 Page 2 of 8

Measurement Conditions DASYsystem configuration, as far as not iven on page 1. DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nomina!l Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 38.5 16 % 1.83 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL SAR averaged aver 1 em* (1 g) of Head TSL Condition SAR measured 250 mW input power 13.3 Wikg SAR for nominal Head TSL parameters normalized to 1W 52.6 Wikg £ 17.0 % (k=2) SAR averaged over 10 cm° (10 g) of Head TSL condition SAR measured 250 mW input power 616 W/kg SAR for nominal Head TSL parameters normalized to 1W 24.5 Wikg + 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 50.8 16 % 2.03 mho/m £ 6 % Body TSL temperature change during test <0.5 °C ——— C SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 12.9 Wikg SAR for nominal Body TSL parameters normalized to 1W 50.2 W/kg £17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 5.95 W/kg SAR for nominal Body TSL parameters normalized to 1W 23.4 Wikg * 16.5 % (k=2) Certificate No: D2450V2—728_May14 Page 3 of 8

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 54.6 Q + 6.1 jQ Return Loss —22.2 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 51.6 Q + 7.2 |Q Return Loss —22.8 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.153 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxtal cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on January 09, 2003 Certificate No: D2450V2—728_May14 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 20.05.2014 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 728 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.83 S/m; &, = 38.5; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.53, 4.53, 4.53); Calibrated: 30.12.2013; e Sensor—Surface: 3mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 30.04.2014 e Phantom: Flat Phantom 5.0 (front); Type: QDOOOP5OAA; Serial: 1001 e DASY32 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 101.5 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 27.6 W/kg SAR(I g) = 13.3 W/kg; SAR(10 g) = 6.16 W/kg Maximum value of SAR (measured) = 17.4 W/kg dB ~4.80 —9.60 ~14.40 —19.20 —24.00 0 dB = 17.4 W/ikg = 12.41 dBW/kg Certificate No: D2450V2—728_May14 Page 5 of 8

Impedance Measurement Plot for Head TSL 12 May 2014 15:35:50 CHI) Si1 1 U FS 1:55.578 a 6.0430 a 392.56 pH 2 450.000 000 MHz Del Cor AVgq 16 H1d CH2 Del Cor Av 16° H1d START 2 250.000 000 MHz STOP 2 650.000 000 MHz Certificate No: D2450V2—728_May14 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 20.05.2014 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 728 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 2.03 S/m; &, = 50.8; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.35, 4.35, 4.35); Calibrated: 30.12.2013; e Sensor—Surface: 3mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 30.04.2014 * Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 e DASY32 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 94.34 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) =27.1 W/kg SAR(1 g) = 12.9 W/kg; SAR(10 g) = 5.95 W/kg Maximum value of SAR (measured) = 17.0 W/kg —4.80 —9.60 —14.40 —19.20 —24.00 0 dB = 17.0 W/kg = 12.30 dBW/kg Certificate No: D2450V2—728_May14 Page 7 of 8

Impedance Measurement Plot for Body TSL 12 May 2014 15:34:29 CHI sii 1 U FS 1: 51.623 a 71777 A 466.27 pH 2 450.000 000 MHz _ 3x Del Cor fAve 16 H1d CH2 Del Cor Av 16 $ H1d START 2 250.000 000 MHz STOP 2 650.000 000 MHz Certificate No: D2450V2—728_May14 Page 8 of 8


Document Created: 2014-06-09 17:06:48
Document Modified: 2014-06-09 17:06:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC