RF Exposure Report Appendix Test Plots

FCC ID: WIYMP200

RF Exposure Info

Download: PDF
FCCID_2566291

Test Laboratory: Compliance Certification Service Inc. SAR Lab 02 Date/Time: 1/12/2015 2.4GHz Band Frequency: 2462 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 2462.2 MHz; σ = 2.05 mho/m; εr = 52; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn558; Calibrated: 7/22/2014 - Probe: EX3DV4 - SN3554; ConvF(6.15, 6.15, 6.15); Calibrated: 9/24/2014 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: SAM 34-2; Type: SAM V4.0; Serial: TP-1150 Bottom/Main Ant/802.11b/Ch 11/Area Scan (6x6x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.367 mW/g Bottom/Main Ant/802.11b/Ch 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.87 V/m; Power Drift = -0.137 dB Peak SAR (extrapolated) = 0.696 W/kg SAR(1 g) = 0.307 mW/g; SAR(10 g) = 0.141 mW/g Maximum value of SAR (measured) = 0.473 mW/g

Test Laboratory: Compliance Certification Service Inc. SAR Lab 02 Date/Time: 1/12/2015 2.4GHz Band Frequency: 2462 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 2462.2 MHz; σ = 2.05 mho/m; εr = 52; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn558; Calibrated: 7/22/2014 - Probe: EX3DV4 - SN3554; ConvF(6.15, 6.15, 6.15); Calibrated: 9/24/2014 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: SAM 34-2; Type: SAM V4.0; Serial: TP-1150 Edge1/Main Ant/802.11b/Ch 11/Area Scan (6x6x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.231 mW/g Edge1/Main Ant/802.11b/Ch 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.4 V/m; Power Drift = -0.118 dB Peak SAR (extrapolated) = 0.289 W/kg SAR(1 g) = 0.123 mW/g; SAR(10 g) = 0.056 mW/g Maximum value of SAR (measured) = 0.194 mW/g

Test Laboratory: Compliance Certification Service Inc. SAR Lab 02 Date/Time: 1/12/2015 2.4GHz Band Frequency: 2462 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 2462.2 MHz; σ = 2.05 mho/m; εr = 52; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn558; Calibrated: 7/22/2014 - Probe: EX3DV4 - SN3554; ConvF(6.15, 6.15, 6.15); Calibrated: 9/24/2014 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: SAM 34-2; Type: SAM V4.0; Serial: TP-1150 Edge4/Main Ant/802.11b/Ch 11/Area Scan (6x7x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.939 mW/g Edge4/Main Ant/802.11b/Ch 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.74 V/m; Power Drift = -0.049 dB Peak SAR (extrapolated) = 2.07 W/kg SAR(1 g) = 0.560 mW/g; SAR(10 g) = 0.214 mW/g Maximum value of SAR (measured) = 1.07 mW/g

Test Laboratory: Compliance Certification Service Inc. SAR Lab 02 Date/Time: 1/12/2015 2.4GHz Band Frequency: 2462 MHz; Duty Cycle: 1:1 Edge4/Main Ant/802.11b/Ch 11/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.07 mW/g


Document Created: 2015-03-10 09:44:03
Document Modified: 2015-03-10 09:44:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC