RF Exposure Report Appendix System Check

FCC ID: WIYMP200

RF Exposure Info

Download: PDF
FCCID_2566290

Test Laboratory: Compliance Certification Service Inc. SAR Lab 02 Date/Time: 1/12/2015 20150112_System Check_Dipole2450 sn728 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 2450 MHz; σ = 2.04 mho/m; εr = 52.1; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn558; Calibrated: 7/22/2014 - Probe: EX3DV4 - SN3554; ConvF(6.15, 6.15, 6.15); Calibrated: 9/24/2014 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: SAM 34-2; Type: SAM V4.0; Serial: TP-1150 Body/Pin=100mW, d=10mm/Area Scan (8x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 5.45 mW/g Body/Pin=100mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 61.0 V/m; Power Drift = -0.016 dB Peak SAR (extrapolated) = 10.6 W/kg SAR(1 g) = 5.04 mW/g; SAR(10 g) = 2.34 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 7.75 mW/g 0 dB = 7.75mW/g

Test Laboratory: Compliance Certification Service Inc. SAR Lab 02 Date/Time: 1/12/2015 20150112_System Check_Dipole2450 sn728 Frequency: 2450 MHz; Duty Cycle: 1:1 Body/Pin=100mW, d=10mm/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 7.72 mW/g


Document Created: 2015-03-10 09:45:08
Document Modified: 2015-03-10 09:45:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC