Manual

FCC ID: WFW-KPROX3

Users Manual

Download: PDF
FCCID_2980947

Specifications
Dimensions
Mullion: 115 mm x 45 mm x 17.5 mm (4 1/2" x 1 3/4" x 11/16")
Wall plate: 121 mm x 76 mm 17.5 mm (4 25/32" x 3" x 11/16")
                                                                                                                                             K-PROX3 Proximity Reader
Power Requirements
12 VDC, 80 mA                                                                                                                               Installation Guide
Read Range                                                                                                                                  This guide outlines how to connect the K-PROX3 proximity reader. The K-PROX3 has
Off metal: up to 12.7 cm (5")                                                                                                               unique LEDs and enhanced security features designed for Keyscan access control systems
On metal: up to 10.2 cm (4")                                                                                                                with compatible firmware. Enhanced security and LED features may not function with
                                                                                                                                            non-Keyscan control boards.
Cable
12" wire pigtail
                                                                                                                                                   Contents                                                  Parts List
6 conductor shielded 22 AWG cable-152 metres (500 feet) maximum
Weight
                                                                                                                                                   Features                                 1                K-PROX Proximity Reader     1
With mullion:                                                                                                                                      Connections                              4                Wall Switch Plate           1
With wall plate:
                                                                                                                                                   Mounting Templates                       5, 7             Screw - tbd                 1
Environmental
Operating Temperature:                    -400     C to    +650     C   (-400F      to   +1490F)                                                   Specifications                           8
Installation
Installation and wiring of systems must be in accordance with the National Electrical                                                        Features
Code, ANSI/NFPA 70.
Do Not Connect To A Receptacle Controlled By A Switch.                                                                                      li!l      Supports certain HID© 125-kHz proximity protocols
Connections
                                                                                                                                            li!l      Uses proven digital radio frequency identification technology
Connections must be in accordance with NFPA 70. Reader and/or control unit power
sources must not be on circuits regulated by switches.                                                                                      li!l      Has dedicated access, power, Present3 and global lockdown LEDs
Certifications
                                                                                                                                            li!l      Offers anti-tamper capability for enhanced security (tamper switch not included)




CE
CE, ETL
                                                                                                                                            li!l      Has innovative heartbeat to detect wiring fault or reader damage with alarm reporting
                                                                                                                                                      triggered by the ACU
                                                                                                                                            li!l      Designed for indoor or outdoor use
                                                                                                                                            li!l      Suitable for mullion or single gang mount
 FCC Compliance Statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: {1) this device may not cause harmful interference, and (2) this device must accept any interference received,                  li!l      Electronics sealed in tamper-resistant epoxy potting
including interference that may cause undesired operation.
Product can be used without license conditions or restrictions in all European Union countries, including Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia,
                                                                                                                                                                                K-PROX3 Proximity Reader
Lithuania, Luxembourg, Malta, Netherlands, Poland , Portugal, Romania, Slovakia, Spain, Sweden, United Kingdom, as well as
other non-EU countries, including Iceland, Norway, and Switzerland
 This device complies with Industry canada licence-exempt RSS standard(s}, Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
                                a
Cet appareil est conforme Industrie Canada exempts de licence standard RSS (s ) . Le fonctionnement
est soumis aux deux conditions suivantes :
( 1 ) ce dispositif ne peut pas provoquer d'interferences et
( 2 ) ce dispositif doit accepter toute interference , y compris les interferences qui peuvent causer un
mauvais fonctionnement du dispositif
Note: This equipment has been tested and found to comply with the limits for a Class A Digital device , pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference when the equipment Is
operated In a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference in which case the user will be
required to correct the interference at his own expense.
IMPORTANT! Changes or modifications not expressly approved by Keyscan, Inc. could void the user’s authority to operate the equipment.

K eyscan Inc. A Member of the Kaba Group
901 Burns St., E. Whitby, Ontario, Canada LlN OE6
1.888.539.7226 (toll free Canada/USA)
905.430.7226 (elsewhere)
www.keyscan.ca
Technical support hours - 9:00 A.M. to 6:30 P.M. Eastern Time
PROX3 Installation Guide - 03.16 (Document # KD10065-E) 01160-001 Rev 1



�
K-                                    BEYOND SECURITY


Keyscan Inc. A Member of the Kaba Group                                                                                                 8


K—PROX3 — LED Overview                                                                   Mullion Template




                                                                                                                      115 mm
                                                                                                                      (@%")




                                                Securereaderto plte
                      wommecass                 with enclosed scrow

LEDs and Security Features
The K—PROX3 has four distinct LEDs with each LED designated to report the state of a
system—specific function. In addition, the K—PROX3 has an anti—tamper capability and a
heartbeat for enhanced reader security. Thefollowing sub—headings review the K—PROX3‘s
LED, antl—tamper and heartbeat functions. Control boards require System PROM version
xa0t or higher when connected to a K—PROX3 reader.                                                  keosssea21s

LED 1 — Access/Door Lock State
*    Red — Indicates door is locked / remains red on an access denled
*    Green — indicates door is unlocked / green during relay unlock time on an access
     granted
The control board must be configured for Reader LED (Red/Green Enabled) mode.

LED 2 ~ Power
The backllt Keyscan logo Indicates reader power:
*    Not llluminated — indicates the reader does not have power
*    Iuminated blue      dicates the reader has power



Keyscan Inc. A Memberof the Kaba Group                                                   K—PROX3 Installation Gulde




K—PROX3 Connection to a PC109x Control Board                                                                             ABS Wall Plate Template

                                                                                                                                                      76 mm
                                                                                                                                                      G0%
                                                                         EPROX3 shoun wih ABS wall swtch plte

                                                                         Orange (Tampe)
                                                                         — when using an optonaltemper sirtch (Normaly
                                                                           Clased)lacaly atreader, comnect t GND black
                                                                           wire
                                                                         — when not usig tamper svitch, connectto GND
                                                                           black wire at reader
                                                                                                                                                      ©
                                                                           Shiekd not comecied
                                                                         Isolte witelecticaltape
             Yelow not used
             Isolate and tape back                       3‘\ép              Purle rot cometed
                                                                          Iolite wit slctical tape
                         Yerow                                Puple
                                                                                 Orange .

  Blue used for pre—alort                     ;      |                                                                                                         121 mm
  othemvise isclte and tare                  3‘ 5) of gf &                                                                                                    (4.2582 ° )
  back                                       192488
                                             igigge
                                             f9G ie
                                             EEREEE
                                             &0
         Sheld not connected                         «                 6 conductors— shieded 22 AWG
       Isolite with electral tape                                      Maxmum 500 t (152.4 m)

      AcU
     Groure
     dz=
       Lug
                                     woroz
                      (ong) ureaig


                                             m 10




                                                           teug) gno




                                                                                                                                 \woosseis




                          ci tep D1 bo PMRGND
                         @een.     wir Gmn reo mik
                         Readerterminal on control board



Keyscan Inc. A Memberof the Kaba Group                                                                                   K—PROX3 Installation Gulde



Document Created: 2016-05-03 15:04:00
Document Modified: 2016-05-03 15:04:00

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC