TEST REPORT

FCC ID: WC2DS-456

Test Report

Download: PDF
FCCID_959760

                            FCC TEST REPORT
FCC ID                : WC2DS-456

Applicant             : Wonders Industrial Development (Shenzhen) Co., Ltd.
                        DOSS Industrial Zone, Qiping Kengdu Industrial Area, Guihua Village,
                        Guanlan Town, Baoan District, Shenzhen, China

Equipment Under Test (EUT) :

Product description   : IPOD WIRELESS SPEAKER

Model No.             : DS-456, DS-482, DS-483, DS-609, DS-495, DS-464, DS-472, DS-492,
                        4015111, 4015110

Standards             : FCC 15 Paragraph 15.249


Date of Test          : June 20, 2008



Test Engineer         : Nunu Deng

Reviewed By           :




                                          PERPARED BY:
                                Waltek Services (Shenzhen) Co., Ltd.
       8C,West Tower, Aidi Building, No.5003 Binhe Rd, Futian District, Shenzhen518045,
                                       Guangdong, China.
                                        Tel: 86-755-83551033
                                        Fax: 86-755-83552400

                                            Page 1 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                                                                                     FCC ID: WC2DS-456



2          Contents
                                                                                                                                                                        Page
1       COVER PAGE..........................................................................................................................................................1
2      CONTENTS ...............................................................................................................................................................2
3      TEST SUMMARY.....................................................................................................................................................4
4      GENERAL INFORMATION ...................................................................................................................................5
     4.1      CLIENT INFORMATION ..........................................................................................................................................5
     4.2      GENERAL DESCRIPTION OF E.U.T. .......................................................................................................................5
     4.3      DETAILS OF E.U.T................................................................................................................................................5
     4.4      DESCRIPTION OF SUPPORT UNITS .........................................................................................................................5
     4.5      STANDARDS APPLICABLE FOR TESTING ...............................................................................................................5
     4.6      TEST FACILITY .....................................................................................................................................................6
     4.7      TEST LOCATION ...................................................................................................................................................6
5      EQUIPMENT USED DURING TEST.....................................................................................................................7
6      CONDUCTED EMISSION TEST............................................................................................................................8
     6.1      TEST EQUIPMENT .................................................................................................................................................8
     6.2      TEST PROCEDURE .................................................................................................................................................8
     6.3      CONDUCTED TEST SETUP .....................................................................................................................................9
     6.4      EUT OPERATING CONDITION ...............................................................................................................................9
     6.5      CONDUCTED EMISSION LIMITS...........................................................................................................................10
     6.6      CONDUCTED EMISSION TEST RESULT ................................................................................................................11
     6.7      MEASUREMENT DATA ........................................................................................................................................12
7      RADIATION EMISSION TEST ............................................................................................................................13
     7.1      TEST EQUIPMENT ...............................................................................................................................................13
     7.2      MEASUREMENT UNCERTAINTY ..........................................................................................................................13
     7.3      TEST PROCEDURE ...............................................................................................................................................13
     7.4      RADIATED TEST SETUP ......................................................................................................................................14
     7.5      SPECTRUM ANALYZER SETUP ............................................................................................................................14
     7.6      CORRECTED AMPLITUDE & MARGIN CALCULATION..........................................................................................15
     7.7      SUMMARY OF TEST RESULTS .............................................................................................................................15
     7.8      EUT OPERATING CONDITION .............................................................................................................................16
     7.9      RADIATED EMISSIONS LIMIT ..............................................................................................................................16
     7.10     RADIATED EMISSIONS TEST RESULT ..................................................................................................................17
8      BAND EDGE............................................................................................................................................................20
     8.1      TEST EQUIPMENT ...............................................................................................................................................20
     8.2      TEST PROCEDURE ...............................................................................................................................................20
     8.3      BAND EDGE........................................................................................................................................................20
     8.4      BAND EDGE TEST RESULT .................................................................................................................................21
9      PHOTOGRAPHS OF TESTING ...........................................................................................................................22
     9.1      CONDUCTED EMISSION TEST VIEW ....................................................................................................................22
     9.2      RADIATION EMISSION TEST VIEW FOR 30MHZ-1000MHZ ................................................................................23
     9.3      RADIATION EMISSION TEST VIEW FOR 1GHZ-10GHZ .......................................................................................23
10     PHOTOGRAPHS - CONSTRUCTIONAL DETAILS.........................................................................................24
     10.1     EUT - FRONT VIEW ............................................................................................................................................24
     10.2     EUT - BACK VIEW .............................................................................................................................................24

                                                                             Page 2 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                                                                                 FCC ID: WC2DS-456



     10.3     PCB1 - FRONT VIEW ..........................................................................................................................................25
     10.4     PCB1 - BACK VIEW ...........................................................................................................................................25
     10.5     PCB2 - FRONT VIEW ..........................................................................................................................................26
     10.6     PCB2 - BACK VIEW ...........................................................................................................................................26
11     FCC ID LABEL .......................................................................................................................................................27




                                                                            Page 3 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                    FCC ID: WC2DS-456



3    Test Summary
              Test         Test Requirement        Test Method      Class / Severity   Result

      Radiated Emission
                          FCC PART 15: 2003      ANSI C63.4: 2003       Class B        PASS
      (30MHz to 10GHz)

      Conducted Emission
                         FCC PART 15: 2003       ANSI C63.4: 2003       Class B        PASS
      (150KHz to 30MHz)




                                         Page 4 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                       FCC ID: WC2DS-456




4     General Information
4.1   Client Information
      Applicant:                  Wonders Industrial Development (Shenzhen) Co., Ltd.
      Address of Applicant:       DOSS Industrial Zone, Qiping Kengdu Industrial Area, Guihua
                                  Village, Guanlan Town, Baoan District, Shenzhen, China
      Manufacturer:               Wonders Industrial Development (Shenzhen) Co., Ltd.
      Address:                    DOSS Industrial Zone, Qiping Kengdu Industrial Area, Guihua
                                  Village, Guanlan Town, Baoan District, Shenzhen, China


4.2   General Description of E.U.T.
      Product description:        IPOD WIRELESS SPEAKER
      Model No.:                  DS-456, DS-482, DS-483, DS-609, DS-495, DS-464, DS-472,
                                  DS-492, 4015111, 4015110

4.3   Details of E.U.T.
      Power Supply:                Adapter input: 100-240V 50/60Hz 0.6A
                                   Adapter output: 9V 1.5A

4.4   Description of Support Units

      The EUT has been tested as an independent unit.

4.5   Standards Applicable for Testing

      The customer requested FCC tests for a IPOD WIRELESS SPEAKER. The standards used
      were FCC 15 Paragraph 15.249, Paragraph 15.207, Paragraph 15.209, Paragraph 15.31,
      Paragraph 15.33, Paragraph 15.35.




                                           Page 5 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                             FCC ID: WC2DS-456


4.6   Test Facility

      The test facility is recognized, certified, or accredited by the following organizations:
•     FCC – Registration No.: 994117
      SEM. Test Compliance Service Co., Ltd. has been registered and fully described in a report
      filed with the (FCC) Federal Communications Commission. The acceptance letter from the
      FCC is maintained in our files. Registration 994117, May 11, 2008.


4.7   Test Location

      All Emissions tests were performed at:-
      SEM Test Compliance Service Co., Ltd. at 3/F., Jinbao Commerce Bldg., Xin’an Fanshen Rd.,
      Bao’an District, Shenzhen, 518101, China




                                              Page 6 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                   FCC ID: WC2DS-456




5       Equipment Used during Test
                                                                                    Cal.
Items    Equipments        Manufacture         Model     Serial No.    Last Cal.
                                                                                   Interval
           EMI Test
    1                    ROHDE&SCHWARZ          ESPI      101206       2008/1/25    1 year
           Receiver
           Spectrum
    2                        Agilent           E4402B   US41192821     2008/1/25    1 year
           Analyzer
    3      L.I.S.N.       SCHWARZBECK        NSLK8126    8126-224      2008/1/25    1 year
    4      L.I.S.N.          EMCO              3825/2     11967C       2008/1/25    1 year
    5    RF LIMITER          Agilent           11867A   MY42241685     2008/1/25    1 year
           Spectrum
    6                    ROHDE&SCHWARZ         FSEA20    DE25181       2008/1/25    1 year
           Analyzer
    7    Test Receiver   ROHDE&SCHWARZ          ESVB    825471/005     2008/1/25    1 year
    8     Amplifier          Agilent            8447F   3113A06717     2008/1/25    1 year
    9     RF Switch            EM             EMSW18    SW060023       2008/1/25    1 year
          Positioning
 10                           C&C             CC-C-1F      N/A         2008/1/25    1 year
          Controller
            Trilog
 11       Broadband       SCHWARZBECK        VULB9163    9163-333      2008/1/25    1 year
           Antenna
 12      Horn Antenna     SCHWARZBECK       BBHA9120D       665        2008/1/25    1 year
 13      Coaxial Cable    SCHWARZBECK          AK9513     9513-10      2008/1/25    1 year




                                         Page 7 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                       FCC ID: WC2DS-456




6     Conducted Emission Test
      Product Name:                 IPOD WIRELESS SPEAKER
      Test Requirement:             FCC Part15 Paragraph 15.207
      Test Method:                  Based on FCC Part15 Paragraph 15.207
      Test Date:                    June 20, 2008
      Frequency Range:              150 kHz to 30MHz
      Class:                        Class B
      Detector:                     Peak for pre-scan (9 kHz Resolution Bandwidth)
                                    Quasi-Peak & Average if maximised peak within 6dB of
                                    Average Limit



6.1   Test Equipment

      Please refer to Section 5 this report.

6.2   Test Procedure

      1. The EUT was tested according to ANSI C63.4: 2003. The frequency spectrum from 150kHz
      to 30MHz was investigated.
      2. The maximised peak emissions from the EUT was scanned and measured for both the Live
      and Neutral Lines. Quasi-peak & average measurements were performed if peak emissions
      were within 6dB of the average limit line.




                                               Page 8 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                        FCC ID: WC2DS-456


6.3   Conducted Test Setup

      The conducted emission tests were performed using the setup accordance with the ANSI
      C63.4:2003, The specification used in this report was the FCC Part15 Paragraph 15.207 limits.




6.4   EUT Operating Condition

      Operating condition is according to ANSI C63.4: 2003.
      A. Setup the EUT and simulators as shown on follow.
      B. Enable RF signal and confirm EUT active.
      C. Modulate output capacity of EUT up to specification.




                                           Page 9 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                           FCC ID: WC2DS-456




6.5   Conducted Emission Limits

                     66-56 dBμV/m between 0.15MHz & 0.5MHz
                     56 dBμV/m between 0.5MHz & 5MHz
                     60 dBμV/m between 5MHz & 30MHz
      Note:     In the above limits, the tighter limit applies at the band edges.




                                           Page 10 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.      FCC ID: WC2DS-456


6.6   Conducted Emission Test Result

      Live Line




       Neutral Line




                                         Page 11 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                      FCC ID: WC2DS-456


6.7   Measurement Data
                                 QP      FCC 15               AV       FCC 15
           Freq.                                   Margin                       Margin
                      Line     Reading   Limit               Reading   Limit
           MHz                                        dB                         dB
                               dBuV      dBuV                 dBuV     dBuV

           0.20       Live      46.0      63.6        17.6    37.1      53.6     16.5
           3.80       Live      32.0      56.0        24.0    27.5      46.0     18.5
           0.21      Neutral    45.2      63.2        18.0    36.5      53.2     16.7
           3.60      Neutral    33.4      56.0        22.6    25.8      46.0     20.2




                                         Page 12 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                           FCC ID: WC2DS-456




7     Radiation Emission Test
      Product Name:                 IPOD WIRELESS SPEAKER
      Test Requirement:             FCC Part15 Paragraph 15.249
      Test Method:                  Based on FCC Part15 Paragraph 15.31 and Paragraph 15.33
      Test Date:                    June 20, 2008
      Frequency Range:              30MHz to 10GHz
      Measurement Distance:         3m
      Detector:                     Peak for pre-scan (120kHz resolution bandwidth)
                                    Quasi-Peak if maximised peak within 6dB of limit

7.1   Test Equipment

      Please refer to Section 5 this report.

7.2   Measurement Uncertainty

      All measurements involve certain levels of uncertainties, especially in the field of EMC. The
      factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor
      calibration, antenna directivity, antenna factor variation with height, antenna phase centre
      variation, antenna factor frequency interpolation, measurement distance variation, site
      imperfections, mismatch (average), and system repeatability.


      Based on ANSI C63.4: 2003, The Treatment of Uncertainty in EMC Measurements, the best
      estimate of the uncertainty of a radiation emissions measurement at SEM. EMC Lab is +4.0
      dB.

7.3   Test Procedure

      1. Maximizing procedure was performed on the six (6) highest emissions to ensure EUT is
         compliant with all installation combinations.
      2. All data was recorded in the peak and average detection mode.
      3. The EUT was under normal mode during the final qualification test and the configuration
         was used to represent the worst case results.

      4.According to the FCC Part 15 Paragraph 15.203, an intentional radiator shall be designed to
        ensure that no antenna other than that furnished by the responsible party shall be used with
        the device. The use of a permanently attached antenna to the intentional radiator shall be
        considered sufficient to comply with the provisions of this section. This product has a
        permanent antenna, fulfill the requirement of this section.



                                               Page 13 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                                         FCC ID: WC2DS-456


7.4   Radiated Test Setup

      The radiated emission tests were performed in the 3m Semi- Anechoic Chamber test site,
      using the setup accordance with the ANSI C63.4: 2003, The specification used in this report
      was the FCC Part15 Paragraph 15.249 and Paragraph 15.209 limits.




7.5   Spectrum Analyzer Setup

      According to FCC Part15 Paragraph 15.249 Rules, the system was tested to 10000 MHz.

                   Start Frequency.............................................. 30 MHz
                   Stop Frequency.............................................. 10000 MHz
                   Sweep Speed Auto
                    IF Bandwidth................................................ 100 kHz
                   Video Bandwidth........................................... 1 MHz
                   Quasi-Peak Adapter Bandwidth .................... 120 kHz
                   Quasi-Peak Adapter Mode ............................ Normal
                   Resolution Bandwidth ................................... 1MHz




                                                 Page 14 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                       FCC ID: WC2DS-456


7.6   Corrected Amplitude & Margin Calculation

      The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Factor, and
      subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows:


          Corr. Ampl. = Indicated Reading + Antenna Factor + Cable Factor - Amplifier Gain


      The “Margin” column of the following data tables indicates the degree of compliance with the
      applicable limit. For example, a margin of -7dBμV means the emission is 7dBμV below the
      maximum limit for Class B. The equation for margin calculation is as follows:
                                Margin = Corr. Ampl. – Class B Limit



7.7    Summary of Test Results

      According to the data in section 7.10, the EUT complied with the FCC Part15 Paragraph
      15.249 standards.




                                          Page 15 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                            FCC ID: WC2DS-456


7.8     EUT Operating Condition

       Same as section 6.4 of this report.

7.9      Radiated Emissions Limit

       A. FCC Part 15 subpart C Paragraph 15.249 Limit

                                         Field Strength of           Field Strength of
          Fundamental Frequency            Fundamental                  Harmonics
                                       mV/m        dBuV/m            uV/m         dBuV/m
                 902-928MHz             50            94             500             54
               2400-2483.5 MHz          50            94             500             54
               5725-5875 MHz            50            94             500             54
                24.0-24.25GHz           250          108             2500            68


      Note:      (1) RF Voltage(dBuV)=20 log RF Voltage(uV)
                 (2) Distance refers to the distance in meters between the measuring instrument
                  antenna and the closed point of any part of the device or system.
                 (3)The emission limit in this paragraph is based on measurement instrumentaion
                 employing an average detector.Measurement using instrumentation with a peak
                 detector function,corresponding to 20dB above the maximum permitted average limit.
                 (4) Above 1GHz,do a Peak and average measurements for all emissions,Limit for
                 peak is 94dBuvV/m,According to Part15.35(b) and average is 54BuvV/m.
       B. Frequencies in restricted band are complied to limit on Paragraph 15.209


              Frequency(MHZ)      Distance(m)       Field strength(dBuV/m)
                  30-88                 3                     40.0
                  88-216                3                     43.5
                 216-960                3                     46.0
                Above 960               3                     54.0


       Note:     (1) RF Voltage(dBuV)=20 log RF Voltage(uV)
                 (2) In the Above Table,the tighter limit applies at the band edges.
                 (3) Distance refers to the distance in meters between the measuring instrument
                     antenna.




                                              Page 16 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                         FCC ID: WC2DS-456


7.10 Radiated Emissions Test Result

     Formula of conversion factors: the field strength at 3m was established by adding
     The meter reading of the spectrum analyzer (which is set to read in units of dBuV)
     To the antenna correction factor supplied by the antenna manufacturer. The antenna
     Correction factors are stared in terms of dB. The gain of the pressletor was accounted
     For in the spectrum analyser meter reading.
              Example:
              Freq(MHz) Meter Reading +ACF=FS
               33           20dBuV+10.36dB=30.36dBuV/m @3m
     Radiated Emission Test Data
     Test Voltage:            120VAC
     Test Mode:               TX On
     Temperature:             24 °C
     Humidity:                52%RH
     Test Result:             PASS
     Remarks: 30-1000MHz radiation test no significant emissions above the equipment noise floor
     were detected.




                                           Page 17 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                            FCC ID: WC2DS-456



    1GHz-10GHz Radiated Emission Data
                                          Emission   FCC 15 Subpart              Antenna   Turntable
    Frequency                Antenna                                  Margin
                Detector                   Level        C Limit                  Height     Angle
     (MHz)                 Polarization                                (dB)
                                          (dBuV/m)     (dBuV/m)                    (m)       (°)

    915.00       AV         Vertical       72.32        94.00         21.68       1.5        90
    915.00       AV        Horizontal      71.15        94.00         22.85       1.5        120
    1830.00      AV         Vertical       35.68        54.00         18.32       1.5        45
    2745.00      AV         Vertical       34.44        54.00         19.56       1.5        90
    3660.00      AV         Vertical       35.79        54.00         18.21       1.5        90
    4575.00      AV         Vertical       36.02        54.00         17.98       1.5        120
    5490.00      AV         Vertical       34.88        54.00         19.12       1.5        45
    6405.00      AV         Vertical       36.43        54.00         17.57       1.5        120
    7320.00      AV         Vertical       34.76        54.00         19.24       1.5        180
    8235.00      AV         Vertical       35.99        54.00         18.01       1.5        90
    9150.00      AV         Vertical       35.84        54.00         18.16       1.5        60
    1830.00      AV        Horizontal      35.45        54.00         18.55       1.5        180
    2745.00      AV        Horizontal      34.05        54.00         19.95       1.5        45
    3660.00      AV        Horizontal      35.62        54.00         18.38       1.5        45
    4575.00      AV        Horizontal      35.84        54.00         18.16       1.5        180
    5490.00      AV        Horizontal      34.75        54.00         19.25       1.5        45
    6405.00      AV        Horizontal      35.95        54.00         18.05       1.5        60
    7320.00      AV        Horizontal      34.71        54.00         19.29       1.5        120
    8235.00      AV        Horizontal      35.92        54.00         18.08       1.5        90
    9150.00      AV        Horizontal      35.61        54.00         18.39       1.5        90
    915.00        PK        Vertical       85.32        114.00        28.68       1.5        90
    915.00        PK       Horizontal      83.15        114.00        30.85       1.5        90
    1830.00       PK        Vertical       40.25        74.00         33.75       1.5        120
    2745.00       PK        Vertical       41.17        74.00         32.83       1.5        120
    3660.00       PK        Vertical       41.58        74.00         32.42       1.5        90
    4575.00       PK        Vertical       42.66        74.00         31.34       1.5        90
    5490.00       PK        Vertical       41.34        74.00         32.66       1.5        45
    6405.00       PK        Vertical       41.62        74.00         32.38       1.5        60
    7320.00       PK        Vertical       42.47        74.00         31.53       1.5        60
    8235.00       PK        Vertical       41.60        74.00         32.40       1.5        100
    9150.00       PK        Vertical       42.59        74.00         31.41       1.5        120
    1830.00       PK       Horizontal      40.22        74.00         33.78       1.5        45
    2745.00       PK       Horizontal      41.05        74.00         32.95       1.5        90



                                             Page 18 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                   FCC ID: WC2DS-456



    3660.00      PK     Horizontal    41.43           74.00   32.57      1.5     180
    4575.00      PK     Horizontal    42.56           74.00   31.44      1.5     120
    5490.00      PK     Horizontal    41.33           74.00   32.67      1.5     45
    6405.00      PK     Horizontal    41.54           74.00   32.46      1.5     180
    7320.00      PK     Horizontal    42.36           74.00   31.64      1.5     120
    8235.00      PK     Horizontal    41.48           74.00   32.52      1.5     90
    9150.00      PK     Horizontal    42.37           74.00   31.63      1.5     90


Note: Above 1GHz,do a Peak and average measurements for all emissions,Limit for peak is
      74dBuvV/m,According to Part15.35(b) and average is 54BuvV/m.




                                         Page 19 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                         FCC ID: WC2DS-456



8     Band Edge
8.1   Test Equipment

      Please refer to Section 5 this report.

8.2   Test Procedure

      1. The EUT, peripherals were put on the turntable which table size is 1mX1.5m, table high
         0.8m. All set up is according to ANSI C63.4: 2003.
      2. The bandwidth of the fundamental frequency was measure by spectrum analyser with
         120kHz RBW and 300kHz VBW. The 20dB bandwidth is defined as the total spectrum the
         power of which is higher than peak power 20dB.



8.3   Band Edge

      Requirements: FCC 15.249(d), the emission power at the START and STOP frequencies shall
      be at least 50dB below the level of the fundamental or to the general radiated emission limits
      in FCC 15.209.




                                               Page 20 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                                                        FCC ID: WC2DS-456


8.4     Band Edge Test Result

       Product Name:                          IPOD WIRELESS SPEAKER
       Test Item:                             Band Edge Test
       Test Voltage:                          120VAC
       Test Mode:                             TX On
       Temperature:                           24 °C
       Humidity:                              52%RH


                             17:17:40 Jun 20, 2008                                         R      T          Marker
                                                                               Mkr2 Δ 292.5 kHz
              Ref 107 dBμV           Atten 10 dB                                      -0.363 dB
                                                                                                      Select Marker
              #Avg
                                                                                                      1       2       3         4
              Log                                                                                 *
              10
                                                            1
              dB/                                                                                         Marker Trace
                                                                                                      Auto        1   2         3
                                               2R                      2

                                                                                                                  Readout
              Dl                                                                                               Frequency
              53.4
              dBμV
                                                                                                              Function
                                                                                                                          Off
              Center 914.5 MHz                                                       Span 1 MHz
              Res BW 120 kHz                       VBW 300 kHz             Sweep 8 ms (401 pts)           Marker Table
                Marker       Trace     Type                 X Axis                    Amplitude       On                  Off
                   1          (1)      Freq           914.5000 MHz                 73.36 dBμV
                  2R          (1)      Freq           914.3550 MHz                 53.07 dBμV
                 2Δ           (1)      Freq                292.5 kHz                 -0.363 dB            Marker All Off


                                                                                                                      More
                                                                                                                      2 of 2




      Note:   (1) The field strength of any emissions which appear outside of this band shall not
                 exceed the general radiated emission limits in Section 15.209.
              (2) This device does meet the FCC requirement.




                                                          Page 21 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.      FCC ID: WC2DS-456




9     Photographs of Testing
9.1   Conducted Emission Test View




                                         Page 22 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.      FCC ID: WC2DS-456


9.2   Radiation Emission Test View For 30MHz-1000MHz




9.3   Radiation Emission Test View For 1GHz-10GHz




                                         Page 23 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.      FCC ID: WC2DS-456




10 Photographs - Constructional Details
10.1 EUT - Front View




10.2 EUT - Back View




                                         Page 24 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.      FCC ID: WC2DS-456


10.3   PCB1 - Front View




10.4   PCB1 - Back View




                                         Page 25 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.      FCC ID: WC2DS-456


10.5 PCB2 - Front View




10.6 PCB2 - Back View




                                         Page 26 of 27


Wonders Industrial Development (Shenzhen) Co., Ltd.                                           FCC ID: WC2DS-456



11 FCC ID Label
     This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
     conditions: (1) this device may not cause harmful interference, and (2) this device must accept
     any interference received, including interference that may cause undesired operation
     The Label must not be a stick-on paper. The Label on these products must be permanently
     affixed to the product and readily visible at the time of purchase and must last the expected
     lifetime of the equipment not be readily detachable.



                             Proposed Label Location on EUT
                        EUT Bottom View/proposed FCC Mark Location




                                  FCC ID: WC2DS-456
                                  This device complies with Part 15 of the FCC Rules.
                                  Operation is subject to the following two conditions: (1)
                                  this device may not cause harmful interference, and (2)
                                  this device must accept any interference received,
                                  including interference that may cause undesired operation




                                                                   Page 27 of 27



Document Created: 2008-06-23 09:31:30
Document Modified: 2008-06-23 09:31:30

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC