Test Report

FCC ID: WC2DS-1203

Test Report

Download: PDF
FCCID_1740307

Page: 1 of 16 FCC TEST REPORT FCC ID : WC2DS-1203 Applicant : Wonders Technology Co., Ltd. Address : Doss Industrial Zone, Qiping Kengdu Industrial Area Guihua Village, Guanlan Town, Baoan District, Shenzhen, China. Equipment Under Test (EUT) : Product Name : CUBE Bluetooth Clock Radio Model No. : DS-1203，HX-B440 Standards : FCC CFR47 Part 15 Section 15.107:2010 FCC CFR47 Part 15 Section 15.109:2010 Date of Test : June 21 ~ June 28, 2012 Date of Issue : June 29, 2012 Tested By : Zero Zhou / Engineer Reviewed By : Philo zhong / Manager Test Result : PASS Prepared By: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, West Baima Rd., Songgang Street, Baoan District, Shenzhen 518105, China Tel :+86-755-83551033 Fax:+86-755-83552400 — The sample detailed above has been tested to the requirements of Council Directives ANSI C63.4:2003. The test results have been reviewed against the Directives above and found to meet their essential requirements. The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:2 of 16 2 Test Summary Test Items Test Requirement Test Method Result Radiated Emission FCC Part 15.109:2009 ANSI C63.4: 2003 PASS Conducted Emission FCC Part 15.107:2009 ANSI C63.4: 2003 PASS The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:3 of 16 3 Contents Page 1 COVER PAGE ........................................................................................................................................................ 1 2 TEST SUMMARY .................................................................................................................................................. 2 3 CONTENTS............................................................................................................................................................. 3 4 GENERAL INFORMATION ................................................................................................................................ 4 4.1 CLIENT INFORMATION ........................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T. ........................................................................................................................ 4 4.3 DETAILS OF E.U.T................................................................................................................................................. 4 4.4 DESCRIPTION OF SUPPORT UNITS .......................................................................................................................... 4 4.5 STANDARDS APPLICABLE FOR TESTING ................................................................................................................ 4 4.6 TEST FACILITY ...................................................................................................................................................... 5 4.7 TEST LOCATION .................................................................................................................................................... 5 5 EQUIPMENT USED DURING TEST .................................................................................................................. 6 6 FCC PART 15 SUBPART B REQUIREMENTS ................................................................................................ 7 6.1 CONDUCTED EMISSION DATA ............................................................................................................................... 7 6.2 E.U.T. OPERATION ................................................................................................................................................ 7 6.3 EUT SETUP ........................................................................................................................................................... 8 6.4 CONDUCTED EMISSION TEST RESULT ................................................................................................................... 8 6.5 RADIATED SPURIOUS EMISSIONS......................................................................................................................... 11 6.6 EUT OPERATION :............................................................................................................................................... 11 6.7 MEASUREMENT UNCERTAINTY ........................................................................................................................... 11 6.8 TEST SETUP ......................................................................................................................................................... 12 6.9 SPECTRUM ANALYZER SETUP ............................................................................................................................. 13 6.10 TEST PROCEDURE ........................................................................................................................................... 14 6.11 CORRECTED AMPLITUDE & MARGIN CALCULATION ...................................................................................... 14 6.12 SUMMARY OF TEST RESULTS ......................................................................................................................... 14 The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:4 of 16 4 General Information 4.1 Client Information Applicant : Wonders Technology Co., Ltd. Address of Applicant : Doss Industrial Zone, Qiping Kengdu Industrial Area Guihua Village, Guanlan Town, Baoan District, Shenzhen, China. Manufacturer : Wonders Technology Co., Ltd. Address of Manufacturer : Doss Industrial Zone, Qiping Kengdu Industrial Area Guihua Village, Guanlan Town, Baoan District, Shenzhen, China. 4.2 General Description of E.U.T. Product Name : CUBE Bluetooth Clock Radio Model No. : DS-1203，HX-B440 Difference Description : All models are exactly the same except for different color and appearance. 4.3 Details of E.U.T. Technical Data : Adapter Input: 100-240VAC, 50/60Hz, 0.4A Adapter Output: DC5V, 2.5A USB for Charging: DC5V, 500mA Operation Frequency : 2402MHz ~ 2480MHz RF Part Data : The RF modula has been tested and passed. For more details of the test results, please refer to the FCC ID: WC2DS-1203 reference No.: WT12064159-D-S-F 4.4 Description of Support Units The EUT has been tested as an independent unit. 4.5 Standards Applicable for Testing The customer requested FCC tests for a CUBE Bluetooth Clock Radio. The rules used were FCC Part 15 Section 15.107:2009 and Section 15.109:2009. The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:5 of 16 4.6 Test Facility The test facility has a test site registered with the following organizations: • IC – Registration No.: IC7760A Waltek Services(Shenzhen) Co., Ltd. has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration 7760A, August 3, 2010. • FCC – Registration No.: 880581 Waltek Services(Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 880581, May 26, 2011. 4.7 Test Location All the tests were performed at: Waltek Services(Shenzhen) Co., Ltd. at 1/F, Fukangtai Building, West Baima Rd.,Songgang Street, Baoan District, Shenzhen, China The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:6 of 16 5 Equipment Used during Test Equipment Manufacturer Equipment Cal. Due Internal No Specification Uncertainty Name Model No Date Date EMC Agilent/ MY451149 Aug. 2, Aug. 1, W2008001 9k-26.5GHz ±1dB Analyzer E7405A 43 2011 2012 SCHWARZB Trilog ECK MESS- 25-3000 Aug. 2, Aug. 1, Broadband 336 W2008002 ±1dB ELEKTROM MHz 2011 2012 Antenne / VULB9163 10m SCHWARZB Coaxial ECK MESS- Aug. 2, Aug. 1, Cable with ELEKTROM - - - - 2011 2012 N-male / AK 9515 Connectors H 10m 50 SCHWARZB Ohm ECK MESS- Aug. 2, Aug. 1, - - - - Coaxial ELEKTROM 2011 2012 Cable / AK 9513 Positioning C&C LAB/ Aug. 2, Aug. 1, - - - - Controller CC-C-IF 2011 2012 Color SUNSPO/ Aug. 2, Aug. 1, - - - - Monitor SP-14C 2011 2012 ROHDE&SC Test Aug. 2, Aug. 1, HWARZ/ 101155 W2005001 9k-3GHz ±1dB Receiver 2011 2012 ESPI ROHDE&SC Two-Line Aug. 2, Aug. 1, HWARZ/ 100115 W2005002 50Ω/50μΗ ±10% V-Network 2011 2012 ENV216 Power_freq Fraq-range : distinguish0. TESEQ 9K-1GHz RF Aug. 2, Aug. 1, 1Hz GmbH/ 25781 W2008008 RF voltage : - Generator 2011 2012 RFeletricity NSG4070 60 dBm- distinguish +10dBm 0.1B Aug.2, Aug.1, PC1 Lenovo T2900D - - ±1dB 2011 2012 Aug.2, Aug.1, K/B Dell L100 - - ±0.5dB 2011 2012 M- Aug.2, Aug.1, Mouse Acer - - ±0.5dB UVACR1 2011 2012 The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:7 of 16 6 FCC Part 15 Subpart B Requirements 6.1 Conducted Emission Data Test Requirement: FCC Part 15 Section 15.107 Test Method: ANSI C63.4:2003 Test Result: PASS Frequency Range: 150kHz to 30MHz Class: Class B Limit: 66-56 dBμV between 0.15MHz & 0.5MHz 56 dBμV between 0.5MHz & 5MHz 60 dBμV between 5MHz & 30MHz Detector: Peak for pre-scan (9kHz Resolution Bandwidth) Quasi- Peak & Average if maximised peak within 6dB of Average Limit 6.2 E.U.T. Operation Operating Environment: Temperature: 25.5 °C Humidity: 51 % RH Atmospheric Pressure: 1012 mbar EUT Operation: The EUT was tested in AUX IN connect PC mode The EUT was tested according to ANSI C63.4:2003. The frequency spectrum from 150kHz to 30MHz was investigated. The maximised peak emissions from the EUT was scanned and measured for both the Live and Neutral Lines. Quasi-peak & average measurements were performed if peak emissions were within 6dB of the average limit line. The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:8 of 16 6.3 EUT Setup The conducted emission tests were performed using the setup accordance with the ANSI C63.4:2003, The specification used in this report was the FCC Part15 Section 15.107 limits. The EUT was placed on the test table in shielding room 6.4 Conducted Emission Test Result An initial pre-scan was performed on the live and neutral lines. The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

wo ww w aimpnepoaee i d2id0] 2637 102 3563 s304 |—2741]. oP 2 d2id0] 2072 102 3108 5304 |—2199] Avo 3 q.7900) 2113 1045 3164 50.00 |—243]. oP a o.79d0| 1863 1045 231 «.00 |—1689] avo 5 1580| 213 1050 3199 56.00 |—240i]. oP 6 Lsat0] 170 1050 2750 «.00 |—18 40] avo 7 23i60] 220 1072 3352 56.00 22481 oP 6 23i60] 2075 1072 3147 400 |—1253] avo 9 122060] 2635 1.00 3035 s0.00 |—2065]. oP 10 1224060] 2624 11.00 3024 50.00 10.7] AVG 1 183700] 2003 ED .07 s0.00 |—2883]. oP 12 183700] 1983 ED 3082 50.00 19.18] Avo romppey ww aie aoys vam ve rprovanioy cnvcpin

wo ww w s a » m m i aimmppnpoaee 0.2100] 2515 102 3544 6320 |—27 761. oP 2 0.2100] 2031 102 3060 £3.20 260| AvG 3 q.3500| 1955 1035 2590 s 4887] oP a 03580 1432 1035 2407 477 |—2010] Avo 5 145t0] 1e3t 1056 2590 56.00 |—27.10]. oP 6 14540] 1321 1056 2277 4.00 |—2223] avo 7 23i60] 2523 1072 3601 56.00 18991 oP 6 230| 2315 1072 307 4.00 |—1213] avo 9 122060] 2677 1.00 3977 s0.00 |—2023]. oP 10 1224060] 2677 11.00 3077 50.00 1023] AVG 1 183700] 2033 ED 3147 s0.00 |—2853]. oP 12 183700] 199 ED 3104 50.00 1899] Avo romppey ww aie aoys vam ve rprovanioy cnvcpin

Page:11 of 16 6.5 Radiated Spurious Emissions Test Requirement: FCC Part 15 Section 15.109 Test Method: ANSI C63.4:2003 Test Result: PASS Frequency Range: 30MHz to 1GHz Measurement Distance: 3m 15.209 Limit: 40.0 dBuV/m between 30MHz & 88MHz 43.5 dBuV/m between 88MHz & 216MHz 46.0 dBuV/m between 216MHz & 960MHz 54.0 dBuV/m above 960MHz Detector: Peak for pre-scan (120kHz resolution bandwidth) Quasi-Peak if maximised peak within 6dB of limit 6.6 EUT Operation : Operating Environment: Temperature: 25.5 °C Humidity: 51 % RH Atmospheric Pressure: 1012 mbar 6.7 Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in the field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity, antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and system repeatability. Based on NIS 81, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of a radiation emissions measurement at Waltek EMC Lab is +5.03dB. The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:12 of 16 6.8 Test Setup The radiated emission tests were performed in the 3m Semi- Anechoic Chamber test site, using the setup accordance with the ANSI C63.4:2003, The specification used in this report was the FCC Part 15 Section 15.109 limits. The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:13 of 16 6.9 Spectrum Analyzer Setup According to FCC Part15B Rules, the system was tested from 30MHz to 1GHz. 30MHz ~ 1GHz Start Frequency ............................................. 30 MHz Stop Frequency..............................................1000MHz Sweep Speed.................................................. Auto IF Bandwidth................................................120 KHz Video Bandwidth...........................................100KHz Quasi-Peak Adapter Bandwidth .................... 120 KHz Quasi-Peak Adapter Mode ............................Normal Resolution Bandwidth ...................................100KHz The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:14 of 16 6.10 Test Procedure 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is moved from 1m to 4m to find out the maximum emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Repeat above procedures until the measurements for all frequencies are complete. 7. The radiation measurements are tested under 3-axes(X,Y,Z) position(X denotes lying on the table, Y denotes side stand and Z denotes vertical stand), After pre-test, It was found that the worse radiation emission was get at the Z position. So the data shown was the Z position only. 6.11 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading + Antenna Factor + Cable Factor - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -7dB means the emission is 7dB below the maximum limit for Class B. The equation for margin calculation is as follows: Margin = Corr. Ampl. – Limit 6.12 Summary of Test Results According to the data in this section, the EUT complied with the FCC Part15 Section 15.109 standards. AUX IN connect PC mode and charging with PC. The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:15 of 16 Test Frequency : 30MHz ~ 1000MHz Antenna polarization: Vertical The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F

Page:16 of 16 Antenna polarization: Horizontal ==END== The results shown in this test report refer only to the sample(s) tested , This Test report cannot be reproduced, except in full, without prior written permission of the Company. WALTEK SERVICES Reference No.: WT12064159R1-D-S-F


Document Created: 2012-07-10 16:57:16
Document Modified: 2012-07-10 16:57:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC