1832181R-IC statement for SAR not required-EZ-BLE Module with HomeKit-CYBLE-4131

FCC ID: WAP3136

Test Report

Download: PDF
FCCID_3841180

RF Exposure Evaluation Declaration Product Name : EZ-BLE Module with HomeKit Model No. : CYBLE-413136-01 CYBLE-473142-01 CYBLE-413149-01 CYBLE-473148-01 IC : 7922A-3136 Applicant : Cypress Semiconductor Address : 198 Champion Ct, San Jose, California 95134 United States Date of Receipt : Mar. 30, 2018 Test Date : Mar. 30, 2018 ~ Apr. 11, 2018 Issued Date : Apr. 13, 2018 Report No. : 1832181R-RF-CA-P20V02 Report Version : V 1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, A2LA or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification (Suzhou) Co., Ltd.

Report No: 1832181R-RF-CA-P20V01 Tes t R e p o r t C e r t i f i c a t i o n Issued Date : Apr. 13, 2018 Report No. : 1832181R-RF-CA-P20V01 Product Name : EZ-BLE Module with HomeKit Applicant : Cypress Semiconductor Address : 198 Champion Ct, San Jose, California 95134 United States Manufacturer : Wujiang Sigmatron Electronics Co., Ltd Address : 386 Huahong Rd, Wujiang, Suzhou, Jiangsu, China Model No. : CYBLE-413136-01 CYBLE-473142-01 CYBLE-413149-01 CYBLE-473148-01 IC : 7922A-3136 EUT Voltage : DC 3.0V-3.6V Applicable Standard : RSS-102: Issue 5, 2015 Test Result : Complied Performed Location : DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 IC Lab Code: 4075B Documented By : (Project Assistant: Kathy Feng) Reviewed By : (Senior Engineer: Frank He ) Approved By : (Engineering Manager : Harry Zhao ) Page: 2 of 5

Report No: 1832181R-RF-CA-P20V01 1. RF Exposure Evaluation 1.1. Limits From RSS-102 Issue 5, Section 2.5.1 Exemption No SAR Evaluation Required if power is below the following threshold: Page: 3 of 5

Report No: 1832181R-RF-CA-P20V01 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18℃and 78％ RH. 1.3. Test Result of RF Exposure Evaluation Product : EZ-BLE Module with HomeKit Test Item : RF Exposure Evaluation Test Site : AC-6  Antenna Gain: Model No. N/A Antenna manufacturer N/A Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna technology SISO Basic CDD MIMO Sectorized Beam-forming Antenna Type Dipole External Sectorized PIFA PCB Internal Ceramic Chip Antenna Metal plate type F antenna Ant Gain Antenna Technology (dBi) SISO -0.5 Page: 4 of 5

Report No: 1832181R-RF-CA-P20V01 Maximum measured transmitter power: Maximum conducted tune-up power is 8.4dBm Pout Pout Maximum Pout Frequency Conducted Conducted Antenna EIRP (MHz) (dBm) (mW) Gain (dBi) (mW) Bluetooth 8.4 6.918 -0.5 6.166 EIRP= PConducted+ Antenna Gain Threshold for no SAR evaluation in 10mm is 7 mW Maximum TX Power is 6.918mW Conducted and 6.166mW EIRP Maximum TX Power is 6.918mW Conclusion: No SAR evaluation required since maximum Transmitter Pout (both conducted and EIRP) is below IC threshold Note: The distance between BT antenna and the shell is over 15mm, so we choose the distance of 15 mm to evaluate no SAR limit. The End Page: 5 of 5


Document Created: 2019-09-12 21:46:05
Document Modified: 2019-09-12 21:46:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC