Modular Approval Letter

FCC ID: WAP3047

Cover Letter(s)

Download: PDF
FCCID_4065267

Modular Approval Request Letter FCC ID: WAP3047 Data: September 20, 2018 Gentlemen: There’s an EZ-BT WICED Module that would like to have your authorization as a modular approval. The specific product as below, with its designed features and specified description, meets special requirements for full modular approval on FCC Public Notice 15.212 Released: June 26, 2000 by cross-reference list below. Company Cypress Semiconductor Model Number CYBT-333047-02; CYBT-333032-02 FCC ID WAP3047 Requirement of Public Notice 15.212 Reference to CYBT-333047-02; CYBT-333032-02 1. The modular transmitter must have its own RF shielding. The module has its own RF shielding. Please see external photo.pdf 2. The modular transmitter must have buffered modulation/data inputs. The modular has buffered data inputs, it is integrated in chip CYW20706. Please see schematic.pdf 3. The modular transmitter must have its own power supply regulation. The main chip CYW20706 has the power supply regulation. 4. The modular transmitter must comply with the antenna requirements of The CYBT-333047-02; CYBT-333032-02 meets the FCC antenna Section 15.203 and 15.204(c). requirements. It is an external antenna, Please see internal photo.pdf 5. The modular transmitter must be tested in a stand-alone configuration, The CYBT-333047-02; CYBT-333032-02 was tested in a stand-alone i.e., the module must not be inside another device during testing. configuration via com serial interface. Please see test set-up photo.pdf 6. The modular transmitter must be labeled with its own FCC ID number, The label position of CYBT-333047-02; CYBT-333032-02 is clearly and, if the FCC ID is not visible when the module is installed inside another indicated. If the FCC ID of the module cannot be seen when it is device, then the outside of the device into which the module is installed installed, then the host label must include the text: Contains FCC ID: must also display a label referring to the enclosed module. WAP3047. Please see the label.pdf 7. The modular transmitter must comply with any specific rule or operating The CYBT-333047-02; CYBT-333032-02 is compliant with all requirements applicable to the transmitter and the manufacturer must applicable FCC rules. Detail instructions are given in the Users provide adequate instructions along with the module to explain any such Manual. Please see user manual.pdf requirements. A copy of these instructions must be included in the application for equipment authorization. 8. The modular transmitter must comply with any applicable RF exposure The CYBT-333047-02; CYBT-333032-02 is approved to comply with requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and the applicable RF exposure requirement, please see the RF Exposure specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and Information. 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Thank you. Sincerely, Yedan LI Cypress Semiconductor



Document Created: 2019-04-06 21:33:48
Document Modified: 2019-04-06 21:33:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC