Modular Approval Letter

FCC ID: WAP2005

Cover Letter(s)

Download: PDF
FCCID_2789809

Cypress Semiconductor 198 Champion Ct, San Jose, California 95134 United States Modular Approval Request Letter FCC ID: WAP2005 Data: Sep. 30, 2015 Gentlemen: There’s an EZ-BLE PRoC Module that would like to have your authorization as a modular approval. The specific product as below, EZ-BLE PRoC Module, with its designed features and specified description, meets special requirements for full modular approval on FCC Part 15.212 Released list below. Company : Cypress Semiconductor Model Name : EZ-BLE PRoC Module Model Number : CYBLE-222005-00 FCC ID : WAP2005 Requirement of FCC Part 15.212 Reference to CYBLE-222005-00 1. The modular transmitter must have its own RF shielding. The module has its own RF shielding. Please see external photo.pdf 2. The modular transmitter must have buffered modulation/data inputs. The modular has buffered data inputs, Please see schematic.pdf 3. The modular transmitter must have its own power supply regulation. All power lines derived from the host device are regulated before energizing other circuits internal to the CYBLE-222005-00. Please see schematic.pdf 4. The modular transmitter must comply with the antenna requirements of Section The CYBLE-222005-00 meets the FCC antenna requirements. 15.203 and 15.204(c). It has a unique connector. 2.98dBi for 2.4G, 5.16dBi for 5G. please see external photo.pdf 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the The CYBLE-222005-00 is tested in a stand-alone module must not be inside another device during testing. configuration Please see conducted set-up photo.pdf and spurious set-up photo.pdf 6. The modular transmitter must be labeled with its own FCC ID number, and, if the The label position of CYBLE-222005-00 is clearly indicated. FCC ID is not visible when the module is installed inside another device, then the Please see the label.pdf outside of the device into which the module is installed must also display a label referring to the enclosed module. 7. The modular transmitter must comply with any specific rule or operating The CYBLE-222005-00 is compliant with all applicable FCC requirements applicable to the transmitter and the manufacturer must provide rules. Detail instructions are given in the Users Manual. adequate instructions along with the module to explain any such requirements. A Please see Installation guide.pdf copy of these instructions must be included in the application for equipment authorization. 8. The modular transmitter must comply with any applicable RF exposure The CYBLE-222005-00 complies with applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific requirements. Please see RF safety evaluation. Pdf Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Thank you. Sincerely, __________________ Yedan Li / System engineer Cypress Semiconductor


Document Created: 2019-09-12 03:12:15
Document Modified: 2019-09-12 03:12:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC