RF Exposure Report

FCC ID: WAP-CY5677

RF Exposure Info

Download: PDF
FCCID_3045285

For FCC Standalone SAR test exclusion considerations FCC ID: WAP-CY5677 Tunable Range F(GHz) Low F(GHz) High 2.402 2.480 According to KDB 447498 D01 General RF Exposure Guidance v06 4.3.1 Standalone SAR test exclusion considerations The 1-g and 10-g SAR test exclusion thresholds for below 100 MHz at test separation distances ≤ 50 mm are determined by: a) The power threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm b) The power threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Note: when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Based on the Maximum measured transmitter power: Pout Maximum Pout Frequency Conducted Antenna EIRP (MHz) (dBm) Gain (dBi) (mW) BT3.0 1.99 1.6 2.29 EIRP= PConducted+ Antenna Gain Threshold for no SAR evaluation is 10.00 mW Maximum TX Power is 2.29 mW EIRP Maximum TX Power is 2.29 mW Conclusion: No SAR evaluation required since maximum Transmitter Pout is below FCC threshold


Document Created: 2016-06-20 16:26:18
Document Modified: 2016-06-20 16:26:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC