W9HLCDD0030_User Manual 2

FCC ID: W9HLCDD0030

Users Manual

Download: PDF
FCCID_1980705

CY-G131605 Barcode 4 REMOTE CONTROL Infra-red transmitter 35*10.5mm 7 TV CONNECTORS 8 Turning the TV On for the First Time Power on/off Select input source Check the jacks for position and type before making any connections. 4.Use Mode Next: Network Setting 5.Select Network Next: Channel Search 6. Channel Search K366 Series Direct channel selection Loose connections can result in image or color problems. Make sure that all connections are tight and secure. Home mode Use Mode Select Network Wired Network Channel Search Please allow 30 minutes to complete. ANT Connect an outdoor VHF/UHF antenna. Retail mode Wireless Network 30% Dash button Select a digital sub-channel Go to the previous channel Home mode default settings are recommended Connect a wireless network with Wi-Fi ATV Channels added:0 DTV Channels added:0 Enter TV source Display the favorite channel list Previous Next Previous Next Skip Stop Increase volume Next channel VHF/UHF Antenna OR Cable Decrease volume Previous channel ANT OUT MUTE button HiMedia (Digital Media Player) MENU OPERATIONS Open the Hi-Smart Home Menu ▲ MENU button Close the menu HDMI / COMP / AV Connect an HDMI cable or Comp/AV Adapter from an Language setting • Please press [ENTER] to start the wizard, then press [▲/ ] button to select your language: English, Spanish or French, external A/V equipment. select [Next] to confirm enter the Welcome screen. • In the Welcome screen introduced the available input devices and interfaces. ▲/ / / ▲ Video Effect: ▲ ▲ 1 3 ▲ ACCESSORIES LIST Country setting • Please press [▲/ ] button to select the country where you will operate the TV. INSTALLING A WALL-MOUNT BRACKET Navigate Up / Down / Left / Right or adjust OSD settings Return to the previous menu Open the DTV program guide BEST (HDMI) Time zone setting • Select the local time zone according to your region. • User Manual • Quick Setup Guide • Warranty Card • Remote Control If you want to attach the TV to a wall-mount bracket (if available) • Daylight Saving: Set the Daylight Saving time for your area. • Battery x 2 (not provided), you should first remove the stand if it is pre-attached (see Step 1). Special function buttons Use Mode • Select your Mode Setting: Home Mode or Retail Mode. Spacer for 40K366WN (see Notes) BETTER • If you select Retail Mode, a message appears “Are you sure to change to retail mode?” Select “OK” to continue, or select Media content control (COMP) L -AUDIO- R 1 function buttons Display the information banner “No” to change your selection. • Screw (M5 x 12mm) x 4 • Screw (M4 x 12mm) x 6 • Screw (ST4 x 14mm) x 2 ASPECT button • Home Mode is the recommended setting which offers full functionality of the television. If you selected Retail Mode, Energy Select picture mode Adjust Closed Caption (CCD) mode Saving is not realized. COMPONENT IN • Wall-mounted screw (M6 x 30mm) x 4 Select sound mode Audio select button PR Set the sleep timer AV IN Select VGA / HDMI source Spacer for 46K366WN Select Component / Select Network • The Select Network : Connect your TV to access the network. • When the Network Setting menu opens, Hisense Service Terms and Conditions will appear. Press [◄/►] to scroll through PB VGA / HDMI source • Screw (M5 x 12mm) x 4 • Screw (M4 x 12mm) x 6 • Screw (ST4 x 14mm) x 2 the pages. Please read it carefully. If you want to access the internet, press the [Agree] button to set your TV’s network Y connections. Otherwise, press the [Disagree] button to enter the Channel search menu. VIDEO • Wall-mounted screw (M6 x 45mm) x 4 • You can setup the network configuration in this menu. For more information, please refer to the section titled “Network NOTE: 1. Illustrations are for your reference only. Connection” and “Network Setup” in the user manual. GOOD 2 INSTALLING THE STAND L -AUDIO- R 2. Red/Green/Yellow/Cyan buttons are used for Electronic Program Guide (EPG) . After pressing the [GUIDE] button when (AV) ▲ viewing digital channels, the same color buttons will appear with explanations in the on-screen display (OSD) . Follow the Channel Search • Press [▲/ ] to select your Tuner Mode: Antenna or Cable, press [ENTER] button to confirm. • Press [ / ] to set the Channel Installation: Scan or Skip Scan, press [ENTER] button to confirm. If you select “Scan”, your ▲ ▲ steps shown in the OSD. COMPONENT IN Follow the illustrations below to complete the installation steps. TV automatically starts Channel Installation available in your viewing area; If you select “Skip Scan”, your TV does not scan PR AV IN for channels; Depending on the reception condition, it may take up to 30 minutes or more to complete memorizing channels. 40K366WN 46K366WN Make sure the TV is laid face-down on a clean, safe, and 5 MAKING CONNECTIONS Please allow the process to complete without interruption. PB cushioned space, remove the original screws in the bracket TV Side View 1 1 • After scan, you will enter the complete interface. It will display all informations that you set just now and then you can press holes on the TV back. “Go” to exit the wizard. Y USB 1 AUDIO OUT VIDEO Note: These 4 screws which got from back cover mount hole could not be used any more. Note: DC 5V 0.5A(MAX) If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned USB 2 VGA & VGA AUDIO Connect a VGA cable and an audio cable from the PC. on before starting the channel scan. If you use a cable or satellite box connected to A/V, Component or HDMI, you don't need to scan for channels. HDMI 1/DVI AUDIO IN Secure the stand column to the base plate with the 4 Secure the stand column to the base plate with the 4 PC/DVI AUDIO IN screws (M4 x 12) provided. screws (M4 x 12) provided. Wall monuted-screws PC IN 2 2 M6 x 30mm(40K366WN)/ M6 x 45mm(46k366WN) 9 HELP TOPICS VGA Power input TV Bottom View When there is something wrong with your TV, you can try turning off the TV and restarting it. You can also refer to the following ANT/CABLE AV IN VIDEO L AUDIO R SPACER x4 chart for problem and solution tips. If the problem cannot be resolved, please contact Hisense for additional assistance. DIGITAL AUDIO OUT LAN HDMI3/ARC HDMI2 Y PB PR COMPONENT IN LAN Connect an ethernet cable to access a network or the Internet. TV also features wireless connectivity. Place the provided spacers in the corresponding bracket Your TV aslo contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Products Recycling Association at http://www.eprassociation.ca to find a recycler in your area. Secure the stand cover to the stand column vertically Secure the stand cover to the stand column vertically with the 2 screws (M4 x 12) provided. holes. Attach purchased bracket (1.5mm to 2.5mm thickness) on the TV with 4 screws which are in the accessories bag. 6 SPECIFICATIONS LAN LAN with the 2 screws (M4 x 12) provided. Follow instructions provided with the wall-mount bracket. Model Name 40K366WN 46K366WN SYMPTOMS POSSIBLE SOLUTIONS 3 Width: 36.3 inches (921.8 mm) Width: 41.6 inches (1057 mm) 2 Without Stand Height: 21.9 inches (555.2 mm) Height: 24.84 inches (631 mm) • Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity. 9.5 ~ 11.5 mm Depth: 2.3 inches (57.9 mm) Depth: 2.4 inches (61 mm) No sound or picture • Attempt to power on unit using the power button on both the TV and the Remote. 3 Wall-Mount Bracket Dimension DIGITAL AUDIO OUT Connect an optical cable from an external digital Width: 36.3 inches (921.8 mm) Width: 41.6 inches (1057 mm) audio system. With Stand Height: 24.1 inches (611.2 mm) Height: 27.1 inches (687.5 mm) Picture is normal, but no sound • Check the volume settings. Depth: 8.9 inches (225 mm) Depth: 9.8 inches (250 mm) DIGITAL • Check if Mute mode is set "on" . Screw AUDIO OUT Secure the stand cover to the stand column horizon- Without Stand 25.4 lbs (11.5 kg) 34.2 lbs (15.5 kg) The TV's rear cover Spacer Weight I have connected an external tally with the 2 screws (ST4 x 14) provided. With Stand 28.7 lbs (13 kg) 39.6 lbs (18 kg) source to my TV and I get no • Check for the correct output connection on the external source and for the correct input connection on the TV. Secure the stand cover to the stand column horizon- picture and/or sound. • Make sure you have made the correct selection for the input mode for the incoming signal. tally with the 2 screws (ST4 x 14) provided. 200 × 200 (40K366WN) LCD Panel Minimum size 40 inches 45.8 inches Wall-Mount hole pattern VESA (mm) (diagonal) 400 × 400 (46K366WN) • Check network physical connection, make sure connection is correct. Screen resolution 1920 x 1080 1920 × 1080 HEADPHONE Connect Headphone for audio out of the TV. 4 M6 (40K366WN) • Enter "Menu" , "Network" , "Configuration" , make sure configuration is correct according to your network service Wall-Mount screw size (mm) Audio power 7W+7W 8W+8W Network connection fail. M6 (46K366WN) provider. Power consumption Power consumption • Enter "Menu" , "Network" , "Configuration" , "Connection Test" to make sure that network connection test is 4 Power supply 120 V ~ 60 Hz successful. Follow instructions provided with the Wall-Mount bracket. Analog NTSC /AUDIO Receiving • If you are not sure of your ability to do complete the installa- systems Digital ATSC / QAM OUT OR • Check network physical connection, make sure connection is correct. tion, contact a professional installer or service technician for VHF: 2~13 UHF: 14~69 CATV: 1 ~ 125 • Enter "Menu" , "Network" , "Configuration" , make sure configuration is correct according to your network service assistance. The manufacturer is not responsible for any Connect Netflix fail. provider. damages or injuries that occur due to mishandling or incorrect Receiving channels Digital Terrestrial Broadcast (8VSB): 2 ~ 69 Digital cable (64/256 QAM): 1 ~ 135 • Enter "Menu", "Network", "Applications", "Netflix", "Deactivation" to reset "Netflix" account. Secure the stand to the TV with the 4 screws (M5 x Secure the stand to the TV with the 4 screws (M5 x assembly. 12) provided. 12) provided. • The selected screws are 9.5 ~ 11.5 mm in length when Tuner type Frequency synthesized USB Connect a USB device for browsing photos, music and movies. • You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps. measured from the attaching surface of the TV's rear cover. Temperature: 41°F ~ 95°F (5°C ~ 35°C) • Connect the TV to the internet through your router by an Ethernet Cable or wireless. If connection fails, check The diameter and length of the screws differ depending on the Environmental conditions Humidity: 20% ~ 80% RH with your internet service provider or router manufacturer to determine if there is a firewall, content filter, or Wall-Mount Bracket model. Atmospheric pressure: 86 kPa ~ 106 kPa How do I get easy IPTV to work proxy settings that may block the TV from accessing the internet. Note: Component Input 480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080 P / 60 Hz on my TV? • Before calling for service, check the following information for possible solutions to problems you may Product image is only for reference, actual product may vary in appearance. Carefully place your TV facedown on a soft, cushioned surface to VGA Input VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz) Mobile Hard Disk experience. If none of these solutions work, turn off the TV, then turn it on again. prevent damage to the TV or scratching to the screen. RGB / 60 Hz (640×480, 800×600, 1024×768) • Caution: Do not try to repair the TV yourself. Refer all servicing to qualified repair personnel. HDMI Input YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P) ctual product.


Document Created: 2013-05-30 09:21:08
Document Modified: 2013-05-30 09:21:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC