Users Manual

FCC ID: W8UL40FHDP60

Users Manual

Download: PDF
FCCID_1665162

LED TV User’s Guide For use with models: L32HDP60 / L40FHDP60 Need Assistance? Please visit our website at www.tclusa.com or call 1-877-300-8837.

Important Information CAUTION This symbol indicates that this product incorporates double insulation between hazardous main voltage RISK OF ELECTRIC SHOCK. and user accessible parts. When servicing, use only DO NOT OPEN. identical replacement parts. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates “dangerous voltage” This symbol indicates important inside the product that presents a risk of instructions accompanying the product. electric shock or personal injury. WARNING WARNING To reduce the risk of fire or electric shock, do not The TV is unstable if it is not properly attached to expose this product to rain or moisture. This product the base or mounted to the wall. Please follow the should not be exposed to dripping or splashing. No base or wall mounting instructions provided in the objects filled with liquids, such as vases, should be User’s Guide to ensure your safety. placed on the component. WARNING The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. This symbol indicates that this product contains mercury. Special disposal of this product for environmental reasons may be required under the laws applicable to your jurisdiction. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical. Important: This television is a table model and is designed to sit on a firm, flat surface. Don’t place the TV on soft carpeting or similar surface because the ventilation slots on the bottom of the unit will be blocked, resulting in reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 4 inches from the top and side of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces. Also, make sure the stand or base you use is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the TV. Refer to the Important Safety Instructions on the next page. The Power button (followed by the power symbol) on this TV and your remote control puts the TV into a very low-power standby mode but will not completely turn the power off. In order to completely shut the power off, you will need to disconnect the power cord from the outlet. The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. Therefore, you should ensure that the TV is installed in a manner that allows you to disconnect the power cord when desired. Product Registration Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Model No. ______________________ Serial No._____________________________________ Purchase Date __________________ Dealer/Address/Phone___________________________ 1

Important Safety Instructions 1. Read and follow all instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 6. Do not negate the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet. 7. Protect the power cord from being walked on or pinched particularly at plugs, receptacles, and the point where it exits from the component. 8. Do not use this component near water. 9. Only use the attachments/accessories specified by the manufacturer. 10. Clean only with dry cloth. 11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the component. When the TV is placed on a cart, use caution when moving the cart to avoid injury from tip-over. 12. Warning: To avoid any injury caused by lean of the product, please always ensure the whole product was place within the table surface in horizontal. 13. Unplug this component during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Service is required when the component is damaged in any way, such as power supply cord or plug damage, liquid spilled on or objects falling onto the component, rain or moisture exposure, abnormal operation, or if the component has been dropped. 15. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See following example: ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT(NEC SEC TION 810-20) GROUNDING CONDUC TORS (NEC SEC TION 810-21) GROUND CLAMPS ELEC TRIC SER VICE EQUIPMENT POWER SER VICE GROUNDING ELEC TRODE SYSTEM ( NEC ART 250, PAR TH) 2

Table of Contents Important Information................................. 1 Closed Caption ..............................................15 Important Safety Instructions...................... 2 Time Setup .....................................................16 System Information ........................................16 Reset All .........................................................16 Chapter 1 - Connections and Setup Parental Control Menu .............................16 Before Initial Setup .....................................4 Change V-Chip Password .............................16 Check Supplied Parts ................................ 4 Channel Block ...............................................16 Attaching Your TV to the Table Stand.............5 Button Block ..................................................17 Mounting Your TV to the Wall..................... 5 V-Chip ............................................................17 Buttons on TV.............................................. 6 Input Block .....................................................18 Explanation of Jacks on TV.......................... 6 Language Menu .......................................18 Choose Your Connections.......................... 7 USB Menu ...............................................18 Remote Control Functions.......................... 9 Obtain the Signal...................................... 10 Chapter 3 - Other Information Switching On............................................ 10 Frequently Asked Questions (FAQs) ........19 Switching Off............................................ 10 Initial Set-up..............................................11 Troubleshooting .......................................20 Care and Cleaning ...................................22 Chapter 2 - Menu Operation Television Specifications ..........................22 Menu Display............................................ 12 Limited Warranty ......................................23 Using Menu System................................. 13 Picture Menu............................................ 13 Picture Preset ................................................13 Brightness ......................................................13 Contrast .........................................................13 Sharpness .....................................................13 Expert Settings ..............................................13 Advanced Settings .........................................13 PC Settings ....................................................13 Reset Picture Settings ....................................13 Sound Menu............................................. 13 Equalizer.........................................................13 Balance...........................................................14 Surround.........................................................14 Speaker .........................................................14 SPDIF Type ...................................................14 Auto Volume Control ......................................14 Analog TV Sound ...........................................14 Default Audio Language .................................14 Current Audio Language ................................14 Setup Menu..............................................14 Signal Type ....................................................14 Channel Scan ................................................14 Channel Skip .................................................14 Channel Edit ..................................................15 Input Skip .......................................................15 Input Labels ...................................................15 3

Chapter 1 Connections and Setup Before Initial Setup Protect Against Power Surges • Connect all components before you plug any power cords into the wall outlet or power strip. • NEVER plug your TV into an outlet that is controlled by a wall switch. • Turn off the TV before you connect or disconnect any cables. • Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions. Safety Information • Protect components from overheating. • Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely. • Don’t stack components. • If you place the component in a stand, make sure you allow adequate ventilation. • If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t harm other components. Avoid Audio Interference • Position cables properly; insert each cable firmly into the designated jack. • If you place components above the TV, route all cables down one side of the back of the TV instead of straight down the middle. • If your antenna uses 300-ohm twin lead cables, do not coil the cables. • Keep twin lead cables away from audio/video cables. Avoid Direct Light Don’t place the TV where sunlight or room lighting is directed toward the screen. Use soft or indirect lighting. Check Supplied Parts Check that the following parts were packed with your product. • 1 Remote Control and 2 AAA Batteries • User’s Guide • Quick Start Guide • Parts for Table Stand Replacing your remote If you need to replace your remote, visit www.tclusa.com. A shipping and handling fee, and the appropriate sales tax, will be charged upon ordering. Have your Visa or MasterCard ready. Graphics contained within this publication are presentation only. 4

Connections and Setup Attaching Your TV to the Table Stand Your TV comes without the table stand attached so that you can choose to mount your TV either to its table stand or to a wall (wall mount sold separately). If you want to mount your TV to the wall, don’t attach the table stand. Follow the Mounting Your TV to the Wall instructions. First, remove the TV bag and place it on a large, flat surface such as a table or countertop. Remove the TV from the carton and place it face down on the TV bag. Be sure that the TV is face down to avoid scratching the screen. Then follow the steps below: Mounting Your TV to the Wall If you are mounting your TV to the wall, don’t attach the table stand. To mount your TV to the wall, purchase a VESA wall mount. Models of 32” Purchase a VESA 100 x 100, M4 screw Models of 40” Purchase a VESA 200 x 200, M6 screw The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 200x200 refers to the fact that the mounting measurements are 200mm horizontally and 200mm vertically. Notes: Follow the directions included with the wall mount to mount the TV to the wall. Caution: Your wall mount must be able to bear a minimum of five times the TV’s net weight to avoid causing damage. 5

Connections and Setup Buttons on TV If you cannot locate your remote, you can use the TV panel buttons on your TV to operate many TV features. CH+/- Selects channels stored in the channel list or acts as the up/ down arrow (▲/▼) through the menu items. VOL+/- Increases/decreases the volume or acts as the right/left arrow (◄/►) through the menu items. VOL+ also acts as the OK button when in the menu system. MENU MENU MENU Brings up the TV’s main menu. INPUT Selects the signal source. (POWER button) Turns the TV on or to standby mode. (Note: INPUT INPUT POWER button is located on the front panel of the TV set. ) Explanation of Jacks on TV This section describes the jacks on the side/back panel of your TV. There are several ways to connect components. COMPONENT IN (CMPT) Lets you connect a component that has component video jacks, such as a DVD player or set-top box. ( Green jack for Y, Blue jack for Pb and Red jack for Pr ) • Y Pb Pr (Component Video) Provides good picture quality because the video is separated into three signals. Use three video-grade or component video cables for the connection. • L/R AUDIO Provides left and right audio connection when using the CMPT VIDEO input. Red and white jacks for R AUDIO and L AUDIO connection. ( For mono audio sources, be sure to use the L AUDIO input.) (Note: AUDIO/VIDEO IN and COMPONENT IN share the same L/R AUDIO input jacks.) AUDIO/VIDEO IN (AV) Lets you connect a component that has composite video jacks, such as a VCR, DVD player or set-top box. Yellow jack for VIDEO connection, red and white jacks for R AUDIO and L AUDIO connection. ( For mono audio sources, be sure to use the L AUDIO INPUT.) DVI/PC AUDIO IN (used for DVI/PC only) Provides audio connection when using HDMI/DVI INPUT 1 jack for DVI or when using PC VIDEO IN. Note: If using a DVI component, remember to connect the audio cable because the DVI cable carries only the picture signal, not the sound. VGA (PC VIDEO IN) Connect your computer or other component with a VGA output to this jack using a 15- pin,D-sub cable. SPDIF OUT - DIGITAL AUDIO OUT (coaxial) Use a digital coaxial cable to connect your TV to a compatible audio receiver. ANT/CABLE/SAT IN Lets you connect a coaxial cable to receive the signal from your antenna, cable, or cable box, or satellite receiver. 6

Connections and Setup USB Allows you to connect a compatible mass storage device. HDMI 1 /DVI IN (High-Definition Multimedia Interface/Digital Visual Interface) Provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI), the jack on the back of your TV is also compatible with DVI components. HDMI 2 IN Lets you connect a component, such as a digital cable box, with an HDMI output for the best picture quality. (HEADPHONE) Allow you to connect headphones to listen to the sound coming from the TV. Choose Your Connections There are several ways to connect components, such as DVD players and set-top boxes, to your TV. Note: No cables are supplied with this unit. Please purchase the necessary cables. A high-speed HDMI cable is recommended for better compatibility. Input Signal Compatability Antenna/Cable 480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats) Composite Video 480i Component Video 480i, 480p, 720p/60Hz, 1080i/60Hz HDMI 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz PC VGA SVGA XGA 7

Connections and Setup HDMI 2 IN Same connection to HDMI 1 IN. COMPONENT IN (CMPT) AUDIO/VIDEO IN (AV) Input TV AV No label CMPT No label INPUT PC No label HDMI 1 No label HDMI 2 No label USB No label PC VIDEO IN HDMI 1 /DVI IN 8

Connections and Setup Remote Control Functions INPUT Opens the Input list; then press INPUT repeatedly to select the video input, or press ▲/▼ to highlight an options, and press OK to select the desired option. INPUT 0-9 (Alphanumeric buttons) Enters a channel number, then press OK (or let the entry timeout). • (dot) To enter a digital channel with a sub-channel, enter the main channel; then, press the dot (•), the sub- channel, and then the OK button. MENU Brings up the main menu or press to return to the previous menu. ▲/▼◄/► (arrows) Highlights different items in the TV menu and adjusts the menu controls. Note: In USB mode, the up or down arrow (▲/▼) can GUIDE also be used for rotating a photo when the photo is being diaplayed. ZOOM+/- (◄/►) Selects the desired screen format. MENU SLEEP + CLEAR SLEEP+/- (▲/▼) Sets the TV to turn off after a given amount of time. ZOOM ZOOM - + PIC Selects picture mode. INFO If no menus are currently active, press INFO to display the Channel information. VOL+/- Increases or decreases the TV volume. PIC SLEEP - GO BACK MUTE Turns the volume on and off. FAV Press the FAV button to browse the channels in your INFO favorite list. Use ▲/▼ to highlight options, then press VOL CH OK to select. MUTE MEDIA Goes to the USB menu. (POWER button) Turns the TV on or standby. FAV MEDIA MTS TV GUIDE Toggles the Electronic Programme Guide between on and off. Only available for digital channels. CLEAR Removes any menu or display from the screen and return to normal viewing. OK Displays Channel List menu. When the TV is in the menu system, press to confirm your selection. GO BACK Returns you to the previously viewed channel. CH+/- Selects channels and external input mode. TV Press to access to the TV mode. RC3000N02 MTS Press to select your desired sound mode. ◄◄ / ►►/ ► These buttons can be used for playing music and / photos in the USB menu. 9

Connections and Setup Obtain the Signal The first step in connecting your TV is obtaining the signal. The back panel of your TV allows you to receive analog and/or digital channels by using the ANT/CABLE/SAT IN. Connect the outside aerial or cable network to the ANT/CABLE/SAT IN on the back of the TV set to receive off-air channels or cable channnels. ANT/CABLE /SAT IN Outdoor or indoor Antenna • If you have a set-top box, you may need to call your cable company or satellite service provider. They may recommend special cables to allow you to view digital Or channels. • The aerial socket (75 OHM - VHF / UHF / cable) can be used for connecting an external aerial or other equipment Or fitted with a modulator (video recorder, satellite receiver, etc.). We recommend that you do not connect other equipment RF Coaxial Wire Cable Box, (video recorder, satellite receiver, etc.) to your TV set to (75 ohm) ( Wall Outlet) begin with, so as not to complicate the set-up procedure with the additional steps involved. Connect them when you have finished setting up the channels. • Visit www.antennaweb.org for help in deciding what type of antenna to use in order to receive the local digital channels available to you. Enter your location, and the program will list local analog and digital stations available using your antenna. Switching On Follow the instructions on this page on how to switch on your TV set and use the remote control before going on to following pages describing how to use the channel scan procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries. - Do not expose batteries to excessive heat such as sunshine, fire or the like, throw them in a fire, recharge them or try to open them, as this could cause them to leak or explode. - Remove the batteries from the remote control if you are not using it for a long period of time. 2. Connect the power cable to a mains socket. (If the power cable is not connected to the television, please first connect the power cable to the television.) Your TV set should only be connected to an AC supply. It must not be connected to a DC supply. If the plug is detached from the cable, do not, under any circumstances, connect it to a mains socket, as there is a risk of electric shock. 3. When powered on, if the TV set is in standby mode, press on the remote control or on the TV set to turn on the TV. Switching Off To put the TV set into standby mode, press on the remote control or on the TV, the TV set remains powered up, but with low energy consumption. To switch off the TV set, unplug the mains socket from the mains outlet. 10

Connections and Setup Initial Setup Initial Setup Language Initial setup involves selecting all the settings required to be Please select your language: English able to search for and store all the channels you can receive. Français Make sure that the television is switched on and follow all the Español steps in turn specified hereafter. The first time you switch the set on, the Initial Setup Wizard opens, which guides you through the initial setup process. 1. The first step of the setup requires you to select your Select Initial Setup OK Next TV Location preferred language for the menu system. Press ▲/▼ to select your language, then press OK/► to enter the next TV Location Home screen. Retail 2. A menu screen asks you to set the TV Location. This mode is Energy Star compliant. • Choosing “Home” for the TV Location assigns the optimal picture settings for most home environments. • Choosing “Retail”, which is not Energy Star compliant, sets the unit up with predefined settings for retail displays. Back Select OK Next Initial Setup Time Zone In this setting, the power consumption may exceed the requirements of the Energy Star® qualification. Please select your time zone: Hawaii Alaska Use ▲/▼ to select the desired location setting (Home/ Pacific Retail); then press OK/► to continue to the next screen. Mountain Note: if you select Retail, a screen menu will display to ask EASTERN Central you go back to the previous menu to select Home again, or Eastern Atlantic you can confirm to proceed to the next screen. Newfoudland 3. Use ▲/▼ to select the current local time zone. Press OK/► Back Initial SetupSelect OK Next CLEAR Exit Tuner to continue to the next screen. Please select your tuner mode: Antenna 4. On the Tuner screen, select either Antenna or Cable/Sat. Cable/Sat Press OK/► to continue to the next screen. Note: If you are using a satellite or cable set-top box, you do not have to complete the Channel Scan. 5. The Channel Scan screen is now displayed. The default choice is to scan. Press OK/► to begin the channel scan for available channels to be stored in the TV’s memory. Back Initial Select Setup OK Next CLEAR Channel Scan Exit Note: If you do not want to scan for channels at this time, First, please connect Cable/Sat or Scan you can select Skip Scan or press OK/► to stop the Antenna. Start Channel Scan Skip Scan scanning process, and perform the channel scan later in the now? If you skip this step, the Setup menu. Channel Scan could be performed in Setup menu later. 6. The screen will change to show the progress of the process. 0% 7. When the scanning is finished, the unit has completed the Back Select OK Next CLEAR Exit Initial Setup. 8. Press CLEAR to exit the Wizard and begin watching TV. 11

Chapter 2 Menu Operation Menu Display Following are just the illustration of the menu display. Picture Sound Picture Preset Natural Equalizer Brightness 50 Balance 0 Contrast 75 Surround On Picture Picture Sharpness 5 Analog TV Sound Stereo Sound Sound Expert Settings Speaker On Setup Setup Advanced Settings SPDIF Type Dolby Digital Parental Control Parental Control Reset Picture Settings Language Language Auto Volume Control Off USB USB Exit Exit MENU Back Adjust Select CLEAR Exit MENU Back OK Enter Select CLEAR Exit Figure 1 Figure 2 Setup Closed Caption Signal Type Antenna CC Setting On Always Channel Scan Analog CC Type Channel Skip Digital CC Type Off Picture Picture Channel Edit Digital CC Preset On Sound Sound Input Skip Digital CC Style Setup Setup Input Labels Parental Control Parental Control Close Caption Language Time Setup Language USB System Information USB Exit Reset All Exit MENU Back Adjust Select CLEAR Exit MENU Back Adjust Select CLEAR Exit Figure 3 Figure 4 Time Setup Parental Control Time Zone Channel Block Time Button Block Off Sleep Timer OFF V-Chip Picture Picture Input Block Sound Sound Change Password Setup Setup Reset All Parental Control Parental Control Language Language USB USB Exit Exit MENU Back OK Enter Select CLEAR Exit MENU Back OK Enter Select CLEAR Exit Figure 5 Figure 6 V-Chip Language Rating Enable On English On US V-Chip Español Desactivado Canada V-Chip Picture Picture Français Unrated/Exempt Ratings View Désactivé Sound Sound Open V-Chip Setup Reset Downloadable Data Setup Parental Control Parental Control Language Language USB USB Exit Exit MENU Back Select Adjust MENU Back Adjust Select CLEAR Exit Figure 7 Figure 8 12

Menu Operation Using Menu System Advanced Settings This section explores the menus of your TV. Each Dynamic Backlight: this option automatically menu is outlined and detailed to help you get the adjusts the brightness of the backlight according most from your TV. To access the menu system: to the content of the incoming signal. Dynamic Backlight optimizes the picture quality and 1. Press MENU to display the main menu. decreases power consumption. 2. Press ▲/▼ to highlight an option, then press OK/► to open the corresponding submenu. Note: when Dynamic Backlight is set to Off, the 3. In submenus, use ▲/▼ to select your desired power consumption may exceed the requirements item, then use ◄/► to set functions or change of the Energy Star® qualification. values, or use OK/► to open the corresponding Noise Reduction: This setting reduces picture submenu. “static” or any type of interference. This feature is 4. Press OK to confirm your selections. especially useful for providing a clearer picture in 5. Press MENU to return to the previous menu or weak analog signal conditions. Choose between press CLEAR to close the menu. these options: Low for a softer, smoother picture that retains Picture Menu picture sharpness and detail. The menus for adjusting the picture are used to Middle for a slightly softer picture than the Low obtain the best picture settings according to your setting. preference, the type of program you are watching High for an even softer, smoother picture than and the ambient lighting. the other settings (the picture detail is somewhat decreased). To access the Picture Menu, press the MENU button on the remote to open the Main menu. SABC (Scene Adaptive Brightness Control): Press▲/▼ to select Picture, then press OK/►to Option: On/Off. If set to On mode, distribution of display options.(Refer to Figure 1.) brightness every scene is picked out automatically, Note: some options may be not available for certain TV always adjusts appropriate brightness by full signal sources. automation. Picture Preset: displays a list that lets you select PC Settings: this option allows you to adjust the PC one of the preset picture settings: Natural, Sports, settings when in PC mode. Personal or ECO, Vibrant, Cinematic. Choose the Reset Picture Settings: this function allows you to setting that is best for your viewing environment. reset all the picture settings to the factory default Note: ECO is the default setting, if you select some settings. other options, the power consumption may change. Brightness: adjusts the brightness of the picture. Contrast: adjusts the difference between the light and dark areas of the picture. Sharpness: adjusts the crispness of the edges in the picture. Expert Settings Sound Menu Backlight: adjusts the backlight level. the menu The Sound Menu lets you adjust audio output. To line is grayed out by default. Only when “Dynamic access the Sound Menu, press MENU on the Backlight” is set to “Off”, the menu line can be remote, and then use ▲/▼ to highlight Sound from adjustable. the Main Menu. Press OK/► to select. The following Color: adjusts the richness of the color. options will be displayed: (Refer to Figure 2.) Tint: this option adjusts the balance between the Equalizer: the five-band equalizer allows you to red and green levels. adjust the audio frequency settings. You can select Color Temperature: adjusts the color temperature one of the five preset options or create a custom from cool to warm. preset. Equalizer: allows you to choose a specific sound Note: Color and Tint are not available in PC preset: Standard, Music, Voice, Movie, and mode. Personal. 13

Menu Operation Frequency Range: displays the different graphic language is not broadcasted with the program, equalizer names set for each sound preset option. then the TV plays the default audio for the program Choose a band and make adjustments. When (usually English in the US). There are 3 available making adjustments, the Equalizer option default languages (English, French, Spanish). automatically changes to Personal. Press ◄/► Note: The Default Audio Language option is only to select the desired frequency (100Hz, 300Hz, available for ditital channels. 1KHz, 3KHz, 10KHz) you wish to adjust. Use ▲/▼ to adjust the level. When you have finished Current Audio Language: press ◄/► to choose adjusting the levels, press MENU to exit. from the list of languages available for the program you’re watching. The language chosen becomes Balance: adjust the amount of audio sent to the left your preferred language for all digital channels until and right speakers. you turn the TV off. If the language chosen is not Surround: option On/Off. When turned on, this being broadcasted with a program, the TV plays the option enables a mode which simulates a surround default language for the program (usually English in sound effect. the US). Speaker: option On/Off. When you select the Off Note: The Current Audio Language option is only option, the sound speaker on the TV will be turned available for ditital channels. off. SPDIF Type: this option controls the type of audio Setup Menu stream sent to the Digital Audio Output jack. The Setup Menu allows you to configure the TV Available options are Dolby Digital, PCM, or Off. with your preferences. Press MENU on the remote Auto Volume Control: option On/Off. This option to open the Main Menu. Press ▲/▼ to select Setup; reduces the annoying blasts in volume that often then press OK/► to display the following options: occur during commercial breaks, and also amplifies (Refer to Figure 3.) softer sounds in program material, eliminating the Signal Type: choose the type of signal (Cable/Sat need for constant volume adjustment. or Antenna) you have connected to the ANT/ Analog TV Sound: this option controls the manner CABLE/SAT IN. in which the sound comes through your speakers. Channel Scan Options available vary according to the input When you perform a Channel Scan, your TV selected. searches for channels with signals and stores the Note: The Analog TV Sound option is only available channel information in the Channel List. Then, as for analog channels. you watch TV and press CH+ or CH-, your TV goes Mono (available for regular TV viewing only): to the next or previous channel in the Channel List this option plays the sound in mono only. Use and skips the channels that do not have signals. this setting when receiving broadcasts with weak If the TV signal source changes – for example, if you stereo signals. change from an outdoor antenna to cable TV – you Stereo : this option splits the incoming stereo will need to rescan for channels. audio signal into left and right channels. Most TV To automatically scan for channels: programs and recorded materials have stereo 1. After choosing a signal type, press ▲/▼ to audio. The word “Stereo” appears in the Channel highlight Channel Scan. Banner when you tune to a program that is 2. Press OK/► to start the scan. You can see the broadcast in stereo. search progress and how many channels are Second Audio Program (SAP): this option plays found in the on-screen menu. (Note: If you wish the program’s audio in a second language, if to stop the search, press the CLEAR button.) available. The letters “SAP” appear in the Channel 3. After the scan is complete, press OK to restart anner when you tune to a program that is broadcast scan, or press the MENU button to return to the with SAP information. SAP audio is broadcast in previous menu, or press the CLEAR button to mono only. SAP is also used to broadcast a close the menu. program’s audio with descriptions of the video for Channel Skip the visually impaired. You can hide channels in the Channel List. Then, Default Audio Language: choose the language you when you press the CH+ or CH- button, the TV will prefer for dialog on digital channels. If the preferred skip the hidden channels. You can still tune to these 14

Menu Operation hidden channels by pressing the number of the 2. Press ▲/▼ to highlight the input source you wish channel on the numeric keypad. to label. To hide specific channels: 3. Press ◄/► to select the label for this source. 1. Select Setup > Channel Skip, press OK/► to 4. Press MENU to return to the previous menu, or open the Channel Skip screen. press CLEAR to close the menu. 2. Press ▲/▼ to highlight the channel you wish to Closed Caption skip; then press OK to check the highlighted Many programs are encoded with closed captioning channel. You can add the channel back into the information, which allows you to display the audio Channel List by highlighting it and un-checking it. portion of a program as text on the TV screen. 3. Repeat the process to hide additional channels. 4. Press MENU to return to the previous menu, or Note: Closed caption settings are not available press CLEAR to close the menu. for HDMI, CMPT or PC inputs. These settings must be set in the connected component’s menu. Channel Edit Closed captioning is not available on all channels The Channel Edit function allows you to add or at all times. Only specific programs are encoded change a channel label, only for analog channels. with closed captioning information. When a digital You cannot change the name on digital channels. program is closed captioned, CC is displayed in the To edit an analog channel name: channel banner. 1. Select Setup > Channel Edit, press OK/► to The Closed Caption options are: (Refer to Figure 4.) open to enter the next screen. CC Setting: this option allows you to choose the 2. Press ▲/▼ to highlight the channel you wish to way closed captioning information appears on the label or edit. screen. 3. Press OK to enter the Channel Edit screen. Off- No captioning information displayed. 4. The Channel Name will be highlighted, press OK On Always- Chooses this option if you want to start editting. captioning information to be shown whenever 5. Use ◄/► to select the input field, then use ▲/▼ available. to enter the name for the channel. On When Mute- This option allows the 6. Press OK to confirm and save the new label. closed captioning to display (when available) 7. Press MENU to return to the previous menu, or whenever the TV’s sound is muted. The press CLEAR to close the menu. captioning information is not displayed when the Input Skip sound is not muted. You can hide video inputs in the Channel List. This Analog CC Type : this option lets you select option allows you to remove the inputs from the the captioning mode used for displaying caption Channel List so you do not encounter them when information, when available. If you are unsure of the channeling up or down. Once you have hidden differences among the modes, you may prefer to inputs, the TV will skip these inputs when you press leave the closed captioned mode set to CC1, which the CH+ or CH- button. displays complete text of the program in the primary language in your area. To hide video inputs: 1. Select Setup > Input Skip, press OK/► to Digital CC Type: if available, this allows you to display the Input Skip screen. select a closed caption service mode (1-6) for digital 2. Press ▲/▼ to highlight the video input you want channels. to hide. Digital CC Preset: if available, this allows you to 3. Press OK to check the highlighted input. You can select between Off and On options. On mode allows add an input by highlighting it and un-checking it. you to set the options below. 4. Repeat the process to hide additional video Digital CC Style: this option lets you customize the inputs. following display options, if available: 5. Press MENU to return to the previous menu, or press CLEAR to close the menu. Caption Style - Select either As Broadcaster or Custom options. If you choose Custom options, Input Labels the setting changes according to the options you You can add a label to a video input source to make choose. it easier to identify. Digital CC Size - Set the size of the digital closed 1. Select Setup > Input Labels, press OK/► to caption text. display the Input Labels screen. 15

Menu Operation Digital CC Font - Select a character design for Reset All the digital closed caption text. A font is a complete This option resets all settings (except parental assortment of letters, numbers, punctuation control settings) to the factory defaults. When you marks, etc. in a given design. You can choose select this option, a confirmation box opens from a variety of fonts. Digital CC Background Color - lets you set the 1. Press ◄/► to select OK or Cancel. color of the area behind the digital closed caption 2. Press OK to confirm. text. Digital CC Background Opacity - Set the Parental Control Menu appearance of the area behind the digital closed caption text. The choices in the US V-Chip and Canada V-Chip Digital CC Color - Sets the color of the digital menus involve software inside your TV, referred to closed caption text. as V-Chip, which allows you to block TV programs and movies. TV programs can be blocked by age- Digital CC Opacity - Sets the appearance of the based ratings, such as TV-MA . If available, TV digital closed caption text. programs can also be blocked by content, such as Time Setup adult language (L) . Movies can only be blocked by age-based ratings. Once you block programs, Time Zone you can unblock them by entering a password. By You can set the correct Time Zone for your area. default, the software inside your TV is turned off or To choose a time zone: unlocked. 1. Select Setup > Time Setup > Time Zone, (Refer V-Chip reads the program’s age-based rating (TV- to Figure 5.) press OK/► to proceed to the next MA, TV-14, etc.) and content themes (Violence screen. (V), Adult Language (L), etc.). If you have blocked 2. Press ◄/► to select the time zone for your area. the rating and/or content themes that the program 3. Press MENU button to return to the previous contains, you receive a message that the channel menu, or press CLEAR to close the menu. is currently blocked. Change the channel or to enter your password and temporarily deactivate the Time parental controls. To set the time: Broadcasters are not required to provide content 1. Select Setup > Time Setup > Time, press OK/► themes, so programs received with no content to proceed to the next screen. themes are blocked only if you block their age- 2. Options on this screen include: based rating. You can also block programs that have Auto Synchronization - Press ◄/► to choose been given an Exempt rating, and programs that are On to acquire the time automatically from digital considered unrated. channels. Change V-Chip Password Daylight Saving - Select Auto to set the daylight saving time for your area automatically. The first time you enter the Parental Control menu, you Date - When Date is highlighted, use ◄/► to must set a password in order to adjust other parental select the input field, then press OK to start to control settings. To enter a V-Chip Password, follow input, again use ◄/► to set the date, finally press these steps: OK to confirm. (Note: using the same way to set 1. Selelct Parental Control > Change Password, the time below) (Refer to Figure 6.) press OK/► to enter the Time - Lets you set the time manually. Change Password screen. Power On Timer - Select Once/Daily/Off. 2. Use the number buttons to enter the four-digit Power On Time - Allows you to set the time you number for your password. want the TV to turn itself on. 3. Re-enter the same code to confirm the password. Power Off Timer - Select Select Once/Daily/Off. Note: The password must be entered before Power Off Time - Allows you to set the time you the TV will continue with Parental settings next want the TV to turn itself off. time. The super password is 2458, If you forget Sleep Timer: Press ◄/► to set the TV to turn off your password, enter it to override any existing after a given amount of time. password. System Information Channel Block This option allows you to see the system information To block a specific channel, follow these steps: including Panel ID, SW Version, Service Model No.. 16

Menu Operation 1. Select Parental Control > Channel Block, press 2. Press ▲/▼/◄/► to navigate through the TV OK/► to enter the next screen with channnel list rating options. Press OK to block (locked) or allow on. (unlocked). 2. Press ▲/▼ to select the channel you wish to US V-Chip Movie Ratings block. You can automatically block all program ratings 3. Press OK to place a checkmark in the box to above a specified age-based rating level. block that channel. When you tune to that channel, you will need to enter a password to 1. Select Parental Control > V-Chip > US V-Chip > view the channel programming. US Movie Ratings, press OK/► to enter the US Movie Ratings screen. Button Block In the US Movie Ratings panel you can customize This option allows you to block (disable) or unblock the program blocking of the following Movie (enable) the TV panel buttons. The remote control ratings: still tunes to any channel. If you are using this to G General audience keep children from changing channels, be sure to PG Parental guidance suggested remove access to any remote that is capable of PG-13 Unsuitable for children under 13 operating the TV while you have the TV panel button R Restricted, under 17 requires companying blocked. To block the TV panel buttons, select parent or adult guardian Parental Control > Button Block, and press ◄/► NC-17 No one under 17 admitted to choose the On option. To enable these buttons X Mature audience only again, return to this menu and choose the Off Canada English or French V-Chip Ratings option. If you receive Canadian programs, you can block V-Chip Canadian English and French V-Chip by ratings only. Press OK/► to display its submenus: (Refer to When you block a particular rating, you automatically Figure 7.) block the higher-rated programs as well. To block Canadian English and French program ratings, V-Chip Rating Enable follow these steps: Select Parental Control > V-Chip > Rating Enable, then press ◄/► to turn this option on or off. 1. Select Parental Control > V-Chip > Canada You must remember to set Rating Enable to On V-Chip, press OK/► to enter the next screen. mode to have the following V-Chip rating limits to 2. Press ▲/▼ to select Canadian English Ratings take effect. or Canadian French Ratings. Press OK/► to proceed. US V-Chip TV Ratings Canandian Enlish Ratings: You can automatically block all program ratings C Children above a specified age-based rating level. C8+ Children 8 and older 1. Select Parental Control > V-Chip > US V-Chip G General audience > US TV Ratings, press OK/► to enter the US PG Parental guidance TV Ratings screen. 14+ Viewer 14 and over In the US TV Ratings panel you can customize 18+ Adult the program blocking of the following TV ratings: Canandian French Ratings: TV–Y All children G General audience TV–Y7 Children 7 years and older 8 ans+ Viewer 8 and older TV–G General audience 13 ans+ Viewer 13 and older TV–PG Parental guidance suggested 16 ans+ Viewer 16 and older TV–14 Parents strongly cautioned 18 ans+ Adult TV–MA Mature audience only 3. Press ▲/▼ to select the desired rating. Press You can also customize the TV ratings for the OK to toggle between View and Block. following content: Open V-Chip: Allows you to select the downloadable A Sexual dialog rating level. In the event that a new rating system is D Sexual explicit dialog provided by the broadcaster, the new rating options L Adult language would appear within this menu. S Sexual situations V Violence Blocking Unrated/Exempt Programs FV Fantasy violence The Unrated/Exempt Ratings option lets you decide 17

Menu Operation if programs that the V-Chip recognizes as unrated TV. or exempt can be viewed. Unrated TV programs The USB feature on your TV allows you to play audio may include news, sports, political, religious, local files (format supported: MP3) or display pictures (format and weather programs, emergency bulletins, public supported: JPEG). To utilize this feature, follow these announcements, and programs without ratings. The steps: Exempt option applies to both US and Canadian unrated programs and Canadian programs rated E. 1. Press MENU on the remote control (the Main Menu 1. Select Parental Control > V-Chip > Unrated/ appears). Exempt Ratings, press OK/► to enter the next 2. Use ▲/▼ to select USB. screen. 3. Press OK/► to proceed to the USB Screen. 2. Press ◄/► to toggle between View and Block. Or, you can press the MEDIA button on the remote View All unrated programs are available. control to display the USB screen directly; you can Block All unrated programs are not available. also press the INPUT button to display the input list and select USB. Reset Downloadable Data (Note: if no USB device is inserted, “No Media” 1. Select Parental Control > V-Chip > Reset displays on the screen, only suppport FAT format Downloadable Data, press OK/► to reset the and unpartitioned USB device) downloadable V-Chip data. Media Brower: select Media Brower, press OK 2. A confirmation box opens. Press ◄/► to select. to enter, then press ▲/▼ to select a file or file 3. Press OK to reset the downloadable rating data, if folder, press OK and use the following menus: present. Open - Select to display the folder/file list in the Input Block USB device. Thumbnail - Select to display the thumbnail of 1. Select Parental Control > Input Block, press the folders/files, only available for photo folders/ OK/► to display the Input source list screen. files. 2. Press ▲/▼ to place a checkmark in the box to Slideshow - Select to to start photo slideshow. block the input. When you tune to that input, you The menu line is grayed-out if there is no photo file will need to enter a password to view the channel. in the root of the current USB device. 3. Press OK to confirm your selection. A locked/ Play Music - Select to playback the music. The unlocked icon appears next to the selected input. menu line is grayed-out if there is no music file in Language Menu the root of the current U disk. Return - Select to return to the previous menu. To select the preferred language for all menus, follow the steps below. You can choose between English, Media Settings: select Media Settings, press Espanol, or Francais. OK to enter, then use the following menus: Photo Settings - Select to display Photo 1. Select Language, press OK/► to display the Settings submenu. Language Screen. (Refer to Figure 8.) Slideshow Interval - Select the Slideshow 2. Press ▲/▼ to select the preferred language for the Interval: 5 Seconds, 10 Seconds, 20 menu. Seconds. 3. Press ◄/► to select On or Off. Slideshow Effect - Select the Slideshow 4. Press the MENU or CLEAR button to exit the menu. Effect. Slideshow Repeat - Select the options: Off/On. USB Menu Thumbnail Size- Select to display the You can connect a device with USB to your TV or thumbnail size: 5X3 and 3X2. use a USB flash drive, only suppport FAT format and Music Settings: select to display Music Settings unpartitioned USB device. This connection allows submenu. you to insert a USB flash drive directly or connect a Music Play Mode - Select the options: Once, compatible mass storage device with USB, such as Play All, Random. a digital camera, a multi-format card reader, or an Music Play Repeat - Select the options: Off/On. MP3 player. If you have a USB drive, plug it into the Music Auto Play - Select the options: Off/On. drive directly. If you have a device with a USB port, 4. Press MENU to go back to the previous menu, or press connect one end of the USB cable to the USB port CLEAR to exit. and the other end to the USB jack on the side of the 18

Chapter 3 Other Information Frequently Asked Questions (FAQs) What’s the quickest way to view High Definition (HD) video? Connect an off-air antenna to the ANT/CABLE/SAT IN to view free local digital channels. You may need to purchase an antenna. Visit www.antennaweb.org for assistance in deciding what type of antenna to use to receive the local digital channels available to you. By entering your location, this mapping program tells you which local analog and digital stations are available using a certain antenna. Are there other ways to view High Definition (HD) video? Besides using an off-air antenna as mentioned above, you can also use a set-top box to receive digital video. Contact your cable company or satellite provider to purchase digital programming and have them connect the box to ensure you are viewing channels the best way. How do I tell an analog channel from a digital channel? Press the INFO button to display the Channel Banner. Look at the bottom right corner of the screen. The dot (•) is displayed for a digital channel. If there is no dot, it is an analog channel. Why are there bars on my screen and can I get rid of them? Most digital video is sent in a 16/9 format which fills your screen, but is sometimes sent in 4/3 which does not fill your screen. It depends on how the station or device connected to your TV is formatting the video. If there are bars on the screen, press the ZOOM -/+ button to try a different format that may eliminate the bars. Some bars can’t be removed because of the way the format is sent by the broadcaster. The format changes as you press the ZOOM -/+ button and the format type is displayed at the bottom of the screen. Why does channel search find a lot of channels, but when I try to tune to them, there’s nothing there? Some channels enabled by the cable company don’t carry programming, such as video ondemand. When channels are unavailable, your TV screen is blank or appears like snow. You probably want to remove these channels from your Channel List. Remove these in the Channel Skip Menu. Why does the first channel search take a long time? If you have both analog and digital channels, the TV is looking for all available channels in the Channel List. If you do have digital channels, the TV is also searching for scrambled channels, non-scrambled channels, and each sub-channel of that digital channel. 19

Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. TV Problems The TV won’t turn on. • Make sure the TV is plugged in. • Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in another device. • The TV panel controls may be locked (disabled). Use the remote control to unlock the TV panel controls. • Select the Button Block feature on the Parental Control menu and press OK to uncheck the box. There is no picture and no sound but the TV is on. • You may be tuned to an input with no component connected to it. If you’re trying to view a connected component, press INPUT until the picture from that component appears. • The Signal Type option may be set incorrectly. • The channel may be blank. Try changing channels. • If you’re watching your VCR and it’s connected with coaxial cable to the ANT/CABLE/SAT IN jack, tune the TV to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR). The sound is fine, but the picture is poor quality. • If you’re getting a black and white picture from a component you’ve connected to your TV, you might have your video cables connected to the wrong jacks. A yellow video cable connects to the yellow VIDEO INPUT jack on the side or back of your TV; three video cables or bundled component video cables (red, blue, and green) connect to the corresponding COMPONENT INPUT jacks on the back of your TV. • Check the antenna connections. Make sure all of the cables are firmly connected to the jacks. There is no sound, but the picture is fine. • The sound might be muted. Try pressing the volume up button to restore sound. • If using DVI or Y, PB, PR, remember to also connect the device’s left and right audio output jacks to the TV’s L and R AUDIO INPUT jacks. • The sound settings may not be set correctly. • If your audio source has only one jack or is a (mono) audio source, make sure you have plugged the connection into the L AUDIO INPUT jack on the TV. The screen is blank. • Check your connections. If you used yellow, red, and white cables to connect, make sure they’re connected to the red, white, and yellow AUDIO/VIDEO INPUT jacks on the side or back of the TV. • If you’re trying to watch something that’s playing on a component connected to the TV (like a DVD), press INPUT until you get to the correct video input channel. • Make sure the component connected to the TV is turned on. • Try another channel. The buttons on the TV panel don’t work. • The TV panel controls may be locked (disabled). Use the remote control to unlock the TV panel controls by selecting the Button Block feature in the Parental Control Menu and press ◄/► to uncheck the box. • Unplug the TV for 10 minutes and then plug it back in. Turn the TV on and try again. The TV turns off unexpectedly. • The electronic protection circuit may have been activated because of a power surge. Wait 30 seconds, and then turn the TV on again. If this happens frequently, the voltage in your house may be abnormally high or low. • Unplug. Wait 10 minutes. Plug in again. 20

Other Information You can’t select a certain channel. • The channel may be blocked or not approved in the Parental Control Menu. • If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/ VCR button on your VCR). • Press the TV button and then try to change channels. The stereo reception is noisy. • It may be a weak station. Use the Sound Menu and Analog TV Sound to choose mono. A black box appears on the screen. • Closed captioning might be on. Check Closed Caption in the Setup menu. You are having problems with the HDMI Connection. • Make sure the HDMI or DVI component is turned on and the cables are firmly connected. If problems still occur, turn off your component and reconnect it. Reset the power by unplugging the power cord and plugging it back in. • If you are tuned to the HDMI 1, or other HDMI INPUT and you’re receiving Unusable Signal message screen, press the INFO button on the remote. If Acquiring Channel appears in the Channel Banner, the HDMI or DVI device isn’t responding. Contact the manufacturer of the HDMI or DVI device for further assistance. • If you tune to the HDMI 1, or other HDMI INPUT and you see snow, the video goes in and out, or the video takes a long time to appear, your HDMI or DVI component is having trouble sending video information to the TV. Reconnect your device. Reset the power by unplugging the power cord and plugging it back in. If problems persist, try connecting the Y Pb Pr jacks if they are available or contact the manufacturer of the HDMI or DVI component for further assistance. • If you have black bars on each side of your picture, the component you connected might have a switch or a menu option allowing you to change the picture quality output that will fix this. Choose either 720p or 1080i. The remote control doesn’t work. • Something might be between the remote and the remote light sensor on the front of the TV. Make sure there is a clear path. • The remote may not be aimed directly at the TV. • The batteries in the remote may be weak, dead, or installed incorrectly. Put new batteries in the remote. The Universal Remote control doesn’t work. This TV utilizes new remote control signals and may not be compatible with your existing universal remote (e.g. satellite box remotes, cable box remotes, and generic universal remotes, etc.). Over time, newer universal remotes will become available that should pick up the new TV codes. You are experiencing problems with V-Chip/Parental Controls. If the rating limits don’t work, you must lock the settings. Go to the Main Menu (press MENU on your remote), select Parental > Program Block > Rating Enable, Rating Enable is highlighted. Press ◄/► to select On to have the rating limits take effect. What else can I do? If you’ve been through the Troubleshooting section and nothing has fixed your problem, try rebooting your TV. Note that after a reboot, you may need to run your TV through the setup process again. To do a reboot, unplug the power cord from the wall outlet or power strip. Keep your TV unplugged for about 5 minutes. Then plug in the TV and turn it on. See if the problem is fixed. If the problem remains, then please visit www.tclusa. com for updated FAQs or contact TCL Customer Support at the support number provided in your Warranty under “How To Get Service.” 21

Other Information Care and Cleaning Caution: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. IMPORTANT: Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of cleaners will damage the TV. The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. While cleaning, do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also, never place drinks or vases with water on top of the TV. This could increase the risk of fire, shock hazard or damage to the TV. Television Specifications Broadcasting system US System NTSC-M ATSC standard (8VSB), QAM Receiving Channels VHF2-13 UHF14-69 CATV 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94)95-99 (A-5)-(A-1) 100-135 (100)-(135) 01 (4A) Tuner type Frequency synthesized Screen refresh rate 60Hz 240Hz (only for models of 48inch and above) 22

TTE Technology, Inc. (“TTE”) Limited Warranty All LCD/LED Models EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND AS DESCRIBED BELOW TTE EXPRESSLY DISCLAIMS, ALL ACTUAL AND IMPLIED WARRANTIES WITH RESPECT TO ANY PRODUCT USED FOR INSTITUTIONAL OR OTHER COMMERCIAL PURPOSES (INCLUDING BUT NOT LIMITED TO RENTAL PURPOSES). What your warranty covers: Defects in materials or workmanship to the original owner of this TCL product when purchased from an Authorized Dealer of TCL brand products and packaged with this warranty statement. New LCD/LED Televisions For how long after your purchase: • Two (2) years from date of purchase for parts. • Two (2) years from date of purchase for labor. What we will do: • At TTE’s discretion, pay an Authorized TCL Service Center for both labor charges and parts to repair your television, or replace your television with a new or refurbished/remanufactured unit. See “How to get service”. How to get service: • Call 1-877-300-8837. Please have your unit’s date of purchase, place of purchase and model/ serial number ready. The model/serial number information can be found on the back of your unit. • A representative will troubleshoot your problem over the phone. If it is determined that your unit requires service, the service location will be at the sole discretion of TTE based upon the TTE Limited Warranty statement. • At the sole discretion of TTE, television screen sizes 32” and smaller will either be repaired at an Authorized TCL Service Center or directly exchanged for a new or refurbished/remanufactured unit. At the sole discretion of TTE, television screen sizes 33” through 55” will either be repaired at an Authorized TCL Service Center or repaired in-home. If repaired at an Authorized TCL Service Center, TTE is not responsible for transportation costs to the Authorized TCL Service Center. However, TTE will pay for return shipping. TTE will provide instructions for packaging and shipping the unit. Proof of purchase in the form of a bill of sale or receipted invoice from an Authorized Dealer which is evidence that the product is within the warranty period must be presented to obtain warranty service. What your warranty does not cover: • Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional information should be obtained from your Authorized Dealer.) • Installation and related adjustments. • Damage resulting from non-approved installation methods. • Signal reception problems not caused by your unit. • Damage from misuse or neglect. • Batteries. • A television that has been modified or incorporated into other products or is used for institutional or other commercial purposes (including but not limited to rental purposes). • A unit purchased or serviced outside the USA. • A unit sold as is or with all faults • Acts of nature, such as but not limited to lightning damage. • Special, incidental or consequential damages. 23

Product Registration: Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY, INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE OR MODIFY THE SCOPE OF THIS WARRANTY. • REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. TTE TECHNOLOGY, INC. SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF CALIFORNIA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY AND WARRANTY PERIOD SET FORTH ABOVE. How State Law relates to this warranty: • Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. • This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. If you purchased your unit outside the United States or seek warranty coverage outside the United States: This warranty does not apply. Contact your dealer for warranty information. Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser. 24

This product incorporates HDMI technology. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are registered trademarks of Dolby Laboratories. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Please do not send any products to the California address listed in this manual or on the carton. This will only add delays in service for your product. TTE Technology, Inc. 1255 Graphite Drive Corona, CA 92881 ©2012 TTE Technology, Inc. TCL and associated marks are trademarks of TCL S.A.used under license to TTE Corporation. Printed in China Part No.: 72-P60C8L-XNA1A


Document Created: 2012-03-09 16:24:08
Document Modified: 2012-03-09 16:24:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC