SZEMO09020038201 rpt

FCC ID: W89-RC-TOYS

Test Report

Download: PDF
FCCID_1108717

                                                  SGS-CSTC Standards Technical Services Ltd.


 No.198 Kezhu Road, Science Town Economic& Technology
 Development District Guangzhou, China 510663Telephone:
 Telephone:   +86 (0) 20 82155555
 Fax:         +86 (0) 20 82075059
 Email:      sgs_internet_operations@sgs.com
                                                                                    Report No.: SZEMO09020038201
 FEDERAL COMMUNICATIONS COMMISSION                                                  Page:       1 of 11
 Registration number: 282399
                                                                                    FCC ID:      W89-RC-TOYS


                                          TEST REPORT
 Application No. :                        SZEMO090200382 (SGS HK NO.: 2021399EL)
 Applicant:                               Apple Toys Development Co., Ltd.
 Applicant Address:                       RM1701-02, 17/F, PODIUM PLAZA., 5 HANOI ROAD TST KOWLOON
                                          HONG KONG
 FCC ID:                                  W89-RC-TOYS
 Fundamental Frequency : 27.145MHz
 Equipment Under Test (EUT):
           Name:                          RADIO CONTROL TOYS
           Model No.:                     8038, 8039, 8322, 9008, 9078, 9023,9025,9027,9083,9085♣
           ♣                              Please refer to section 2 of this report which indicates which item was
                                          actually tested and which were electrically identical.
 Country of Origin:                       China
 Labeled Age Grading:                     3+
 Standards:                               FCC PART 15, SUBPART C : 2008
                                          Section 15.227
 Date of Receipt:                        4 February 2009
 Date of Test:                           4 to 11 February 2009
 Date of Issue:                           12 February 2009
 Test Result :                             PASS *

     *   In the configuration tested, the EUT complied with the standards specified above.



 Authorized Signature:




 Robinson Lo
 Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new
system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS
International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by
SGS International Electrical Approvals in writing.
The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of
the federal government. All test results in this report can be traceable to National or International Standards.
“This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and
within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to
a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in
full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this
document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test
report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”


                                                  SGS-CSTC Standards Technical Services Ltd.
                                                                                     Report No.: SZEMO09020038201
                                                                                     Page:       2 of 11

2       Test Summary
                          Test                      Test Requirement                     Standard Paragraph                      Result
          Radiated Emission
                                                   FCC PART 15 :2008                          Section 15.227                      PASS
          (30MHz to 1000MHz)
          Occupied Bandwidth                       FCC PART 15 :2008                          Section 15.215                      PASS
        .Remark:
        Tx:      In this whole report Tx (or tx) means Transmitter.
        Rx:           In this whole report Rx (or rx) means Receiver.
        Remark:
        Item No: 8038, 8039, 8322, 9008, 9078, 9023, 9025, 9027, 9083, 9085
        Only the Item 9023 was tested, since the electrical circuit design, layout, components used and internal
        wiring were identical for the above items.




FCC ID: W89-RC-TOYS
 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a
transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to
the sample(s) tested and such sample(s) are retained for 90 days only.”


                                                           SGS-CSTC Standards Technical Services Ltd.
                                                                                                     Report No.: SZEMO09020038201
                                                                                                     Page:       3 of 11



3         Contents
                                                                                                                                                                        Page
1       COVER PAGE                                                                                                                                                               1

2       TEST SUMMARY .................................................................................................................................................... 2

3       CONTENTS .............................................................................................................................................................. 3

4       GENERAL INFORMATION.................................................................................................................................... 4
    4.1     DETAILS OF E.U.T................................................................................................................................................... 4
    4.2     DESCRIPTION OF SUPPORT UNITS ............................................................................................................................ 4
    4.3     TEST LOCATION ...................................................................................................................................................... 4
    4.4     OTHER INFORMATION REQUESTED BY THE CUSTOMER........................................................................................... 4
    4.5     TEST FACILITY ........................................................................................................................................................ 5
5       TEST RESULTS ...................................................................................................................................................... 6
    5.1 E.U.T. OPERATION ................................................................................................................................................. 7
    5.2 TEST PROCEDURE & MEASUREMENT DATA............................................................................................................ 7
       5.2.1 Radiated Emissions ................................................................................................................................... 7
       5.2.2 Occupied Bandwidth.............................................................................................................................9-11




FCC ID: W89-RC-TOYS
 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a
transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to
the sample(s) tested and such sample(s) are retained for 90 days only.”


                                                  SGS-CSTC Standards Technical Services Ltd.
                                                                                     Report No.: SZEMO09020038201
                                                                                     Page:       4 of 11


 4        General Information
 4.1        Details of E.U.T.
           Name:                            RADIO CONTROL TOYS
           Model No.:                       8038, 8039, 8322, 9008, 9078, 9023,9025,9027,9083,9085
           Power Supply:                    DC 3.0V(2*1.5V”AA” Size Batteries)
           Power Cord:                      N/A-

 4.2        Description of Support Units
         The EUT was tested as an independent unit: a 27MHz radio transmitter.

 4.3        Test Location
          All tests were performed at:
          SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory, No.198 Kezhu
          Road, Science Town Economic& Technology Development District Guangzhou, China 510663

          Tel: +86 20 82155555                     Fax: +86 20 82075059

          No tests were sub-contracted.

 4.4        Other Information Requested by the Customer
          None.




FCC ID: W89-RC-TOYS
 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a
transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to
the sample(s) tested and such sample(s) are retained for 90 days only.”


                                                  SGS-CSTC Standards Technical Services Ltd.
                                                                                     Report No.: SZEMO09020038201
                                                                                     Page:       5 of 11



4.5       Test Facility
         The test facility is recognized, certified, or accredited by the following organizations:
        NVLAP – Lab Code: 200611-0
         SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is recognized under
         the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0.
        ACA
         SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the
         Australian C-Tick mark as a result of our NVLAP accreditation.
        SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO
         Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of
         EMC TESTING SERVICES and SAFETY TESTING SERVICES.
        CNAS L0167
         SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been assessed and in
         compliance with CNAS-CL01:2006 accreditation criteria for testing laboratories (identical to
         ISO/IEC 17025:2005 General Requirements) for the Competence of Testing Laboratories.
        FCC – Registration No.: 282399
         SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been registered and fully
         described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter
         from the FCC is maintained in our files. Registration 282399, May 31, 2002. With the above and
         NVLAP’s accreditation, SGS-CSTC is an authorized test laboratory for the DoC process.
        Industry Canada (IC)
         The 3m/10m Alternate Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd.
         has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment
         testing with Registration No.: 4620B-1.
         Date of Registration: Jan 15, 2007. Valid until Jan 15, 2009
        VCCI
         The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services
         Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures
         with Registration No.: R-2460 and C-2584 respectively.
         This certificate is valid until September 14.2009




FCC ID: W89-RC-TOYS
 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a
transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to
the sample(s) tested and such sample(s) are retained for 90 days only.”


                                                  SGS-CSTC Standards Technical Services Ltd.
                                                                                     Report No.: SZEMO09020038201
                                                                                     Page:       6 of 11


5        Test Results
 Test Instruments
           RE in Chamber
                                                                                          Inventory Cal.Date                  Cal.Due date
  Item Test Equipment                     Manufacturer               Model No.
                                                                                          No.       (dd-mm-yy)                (dd-mm-yy)
           3m Semi-Anechoic
     1                                    ETS-LINDGREN               N/A                  SEL0017         16-06-2007          15-06-2009
           Chamber
     2     EMI Test Receiver              Rohde & Schwarz            ESIB26               SEL0023         12-12-2008          11-12-2009

     3     EMI Test software              AUDIX                      E3                   SEL0050         N/A                 N/A
     4     Coaxial cable                  SGS                        N/A                  SEL0028         18-06-2008          17-06-2009
           BiConiLog Antenna
     5                                    ETS-LINDGREN               3142C                SEL0014         12-08-2008          11-08-2009
           (26-3000MHz)
           Pre-amplifier                  Agilent
     6                                                               8447D                SEL0053         18-06-2008          17-06-2009
           (0.1-1300MHz)                  Technologies
           Double-ridged horn
     7                                    ETS-LINDGREN               3117                 SEL0005         12-08-2008          11-08-2009
           (1-18GHz)
           Horn Antenna
     8                                    ETS-LINDGREN               3160                 SEL0076         12-08-2008          11-08-2009
           (18-26GHz)
           Pre-amplifier                                  AFS42-00101
     9                                     Rohde & Schwarz             SEL0081                            18-06-2008          17-06-2009
           (1-18GHz)                                      800-25-S-42
           Pre-amplifier                                  AFS33-18002
    10                                    Rohde & Schwarz              SEL0080                            18-06-2008          17-06-2009
           (18-26GHz)                                     650-30-8P-44
    11     Band filter                    Amindeon        82346        SEL0094                            18-06-2008          17-06-2009

    12     Active.Loop Antenna Beijing Daze                          ZN30900A             SEL0097         15-06-2008          14-06-2009




FCC ID: W89-RC-TOYS
 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a
transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to
the sample(s) tested and such sample(s) are retained for 90 days only.”


                                                  SGS-CSTC Standards Technical Services Ltd.
                                                                                     Report No.: SZEMO09020038201
                                                                                     Page:       7 of 11



   5.1       E.U.T. Operation
             Operating Environment:
             Temperature:                         24.0 °C
             Humidity:                            52 % RH
             Atmospheric Pressure:                1010 mbar
             EUT Operation:                       Test the EUT in transmitting mode.

   5.2       Test Procedure & Measurement Data
   5.2.1 Radiated Emissions
             Test Requirement:                    FCC Part15 C Section 15.227
             Test Method:                         ANSI C63.4 :2003
             Measurement                          3m (Semi-Anechoic Chamber)
             Distance:
             Requirements:                        Carrier Power will not exceed 80dBuV/m at 3m (Average).
                                                  Out of band emissions shall not exceed:
                                                  40.0 dBµV/m between 30MHz & 88MHz
                                                  43.5 dBµV/m between 88MHz & 216MHz
                                                  46.0 dBµV/m between 216MHz & 960MHz
                                                  54.0 dBµV/m above 960MHz
             Detector:                            9KHz to 30MHz         RBW=9KHz VBW=30KHz
                                                  30MHz to 1000MHz RBW=100KHz VBW=300KHz
                                                  Above 1000MHz         RBW=1MHz VBW=3MHz
             Test Procedure:                      1. The EUT is placed on a turntable, which is 0.8m above ground plane.
                                                  2. The turntable shall be rotated for 360 degrees to determine the
                                                  position of maximum emission level.
                                                  3. EUT is set 3m away from the receiving antenna, which is moved from
                                                  1m to 4m to find out the maximum emissions.
                                                  4. Maximum procedure was performed on the six highest emissions to
                                                  ensure EUT compliance.
                                                  5. And also, each emission was to be maximized by changing the
                                                  polarization of receiving antenna both horizontal and vertical.
                                                  6. Repeat above procedures until the measurements for all frequencies
                                                  are complete.
                                                  7. The radiation measurements are performed in X, Y, Z axis
                                                  positioning. Only the worst case is shown in the report.


   27.145MHz Mode
   Test Procedure: For testing performed with the loop antenna, testing was performed in accordance to
   ANSI C63.4:2003 section 8.2.1. The center of the loop was positioned 1 m above the ground and
   positioned with its plane vertical at the specified distance from the EUT. During testing the loop was rotated
   about its vertical axis for maximum response at each azimuth and also investigated with the loop
   positioned in the horizontal plane.



FCC ID: W89-RC-TOYS
 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a
transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to
the sample(s) tested and such sample(s) are retained for 90 days only.”


                                                  SGS-CSTC Standards Technical Services Ltd.
                                                                                     Report No.: SZEMO09020038201
                                                                                     Page:       8 of 11



        Intentional emission
           Test Frequency                        Peak (dBµV/m)                          Limits                      Margin (dB)
                  (MHz)                   Ver tic al           Hor izontal            (dBµV/m)            Ver tic al           Hor izontal
                 27.145                     71.03                  58.70               100.00                28.97                 41.30


           Test Frequency                      Average (dBµV/m)                         Limits                      Margin (dB)
                  (MHz)                   Ver tic al           Hor izontal            (dBµV/m)            Ver tic al           Hor izontal
                 27.145                     66.63                  54.30                80.00                13.37                 25.70


       Other emissions
       Vertical
                               Cable          Antenna          Preamp            Read                                                  Over
          Frequency                                                                               Level          Limit Line
                               Loss            Factor          Factor            Level                                                 Limit
            (MHz)                                                                               (dBuV/m)         (dBuV/m)
                               (dB)            (dB/m)           (dB)            (dBuV)                                                 (dB)
             54.250             0.80             7.64           28.08            40.21             20.57             40.00            -19.43
             89.350             1.10             8.64           27.95            33.83             15.62             43.50            -27.88
            324.325             1.98            14.80           26.91            43.24             33.11             46.00            -12.89
            378.925             2.14            16.05           27.28            41.19             32.10             46.00            -13.90
            514.450             2.62            18.23           27.70            35.21             28.36             46.00            -17.64
       Horizontal
                               Cable          Antenna          Preamp            Read                                                  Over
          Frequency                                                                               Level          Limit Line
                               Loss            Factor          Factor            Level                                                 Limit
            (MHz)                                                                               (dBuV/m)         (dBuV/m)
                               (dB)            (dB/m)           (dB)            (dBuV)                                                 (dB)
            133.225             1.29             7.84           27.58            33.74             15.29             43.50            -28.21
            269.725             1.77            12.70           26.83            36.58             24.22             46.00            -21.78
            297.025             1.88            13.76           26.73            40.47             29.38             46.00            -16.62
            324.325             1.98            14.80           26.91            39.60             29.47             46.00            -16.53
            378.925             2.14            16.05           27.28            36.08             26.99             46.00            -19.01

        Remark:
        According to 15.35 (b) When average radiated emission measurements are specified
        in the regulations, including emission measurements below 1000 MHz, there is also a
        limit on the radio frequency emissions, as measured using instrumentation with a peak detector
        function, corresponding to 20 dB above the maximum permitted average limit for the
        frequency being investigated unless a different peak emission limit is otherwise specified in
        the rules, e.g., see Section 15.255.


        Test Results: The unit does meet the FCC Part 15 C Section 15.227 requirements.




FCC ID: W89-RC-TOYS
 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a
transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to
the sample(s) tested and such sample(s) are retained for 90 days only.”


                                                  SGS-CSTC Standards Technical Services Ltd.
                                                                                     Report No.: SZEMO09020038201
                                                                                     Page:       9 of 11



   5.2.2 Occupied Bandwidth
               Test Requirement:                FCC Part 15 C Section 15.215 (C)
               Test Method:                     ANSI C63.4 :2003
                                                Operation within the band 26.960 – 27.280 MHz
               Requirements:                    Intentional radiators operating under the alternative provisions to the
                                                general emission limits, as contained in §§ 15.217 through 15.257 and in
                                                subpart E of this part, must be designed to ensure that the 20 dB
                                                bandwidth of the emission is contained within the frequency band
                                                designated in the rule section under which the equipment is operated.
                                                The requirement to contain the 20 dB bandwidth of the emission within
                                                the specified frequency band includes the effects from frequency
                                                sweeping, frequency hopping and other modulation techniques that may
                                                be employed as well as the frequency stability of the transmitter over
                                                expected variations in temperature and supply voltage. If frequency
                                                stability is not specified in the regulations, it is recommended that the
                                                fundamental emission be kept within at least the central 80% of the
                                                permitted band in order to minimize the possibility of out-of-band
                                                operation.


               Method of                        The useful radiated emission from the EUT was detected by the
               measurement:                     spectrum analyser with peak detector. The vertical Scale is set to 10dB
                                                per division. The horizontal scale is set to 32KHz per division.




FCC ID: W89-RC-TOYS
 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a
transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to
the sample(s) tested and such sample(s) are retained for 90 days only.”


                                                  SGS-CSTC Standards Technical Services Ltd.
                                                                                     Report No.: SZEMO09020038201
                                                                                     Page:       10 of 11


               The graph as below: represents the emissions take for this device.
                                                                               * RBW 1 kHz           Marker 1 [T1 ]
                                                                               * VBW 3 kHz                     -35.19 dBm
                       Ref -20 dBm                       Att     10 dB           SWT 320 ms              27.144960000 MHz
                        -20                                                                          ndB [T1]   20.00           dB
                                                                                                     BW   7.040000000           kHz
                                                                                                     Temp 1 [T1 ndB]                   A
                        -30
                                                                                      1
                                                                                                               -54.14           dBm
               1 PK
                                                                                                         27.141760000           MHz
               MAXH
                        -40                                                                          Temp 2 [T1 ndB]
                                                                                                               -55.09           dBm
                                                                                                         27.148800000           MHz
                        -50
                                                                                     T1T2


                        -60



                        -70


                                                                                                                                      3DB
                        -80



                        -90



                        -100



                        -110


                        -120

                       Start 26.96 MHz                                   32 kHz/                               Stop 27.28 MHz




               Date: 10.FEB.2009                15:17:19


               The results: The unit does meet the FCC Part 15 C Section 15.215 requirements.




FCC ID: W89-RC-TOYS
 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a
transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to
the sample(s) tested and such sample(s) are retained for 90 days only.”


                                                  SGS-CSTC Standards Technical Services Ltd.
                                                                                     Report No.: SZEMO09020038201
                                                                                     Page:       11 of 11




FCC ID: W89-RC-TOYS
 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any
holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a
transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to
the sample(s) tested and such sample(s) are retained for 90 days only.”



Document Created: 2009-04-22 12:15:14
Document Modified: 2009-04-22 12:15:14

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC