|Applicant Business||SOLiD, Inc.|
|Business Address||10,9th Floor, SOLiD Space, Pangyoyeok-ro 220, Bundang-gu,, Seongnam-si, Gyeonggi-do,N/A South Korea 463-400|
|TCB Scope||B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27|
|TCB Email||[email protected]|
|Applicant||Kangyeob Bae – Team Manager |
|Applicant Phone|| |
|Applicant Email||[email protected]|
|Test Firm||HCT Co., Ltd.|
|Test Firm Contact||Lee Yoon-Jung|
|Test Firm Phone|| |
|Test Firm Fax||82-31-645-6401|
|Test Firm Email||[email protected]|
|Certified By||Eunmi Kim – Manager|
Comment [P9DmiTHYNzT8djjzQQq7/Q==]: In-Building DAS. Output power is conducted. Device supports TDD-LTE bandwidths of 20/40/60MHz.
This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the downlink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and licensing, and the use of higher gain antennas may require larger separation distances.