User Manual 3

FCC ID: W38CT1H00

Users Manual

Download: PDF

FCCID_1071336

Copyright
Copyright© 2008 Coulomb Technologies, Inc. All rights reserved.
This material is protected by the copyright laws of the United States and other countries. It
may not be modified, reproduced or distributed without the prior, express written consent
of Coulomb Technologies, Inc.
Safety and Compliance
This manual only covers installation of Coulomb’s Smartlet™ Charging Station and should
not be used for any other product. Before installing the Smartlet Charging Station, you
should review this manual carefully and consult with a licensed contractor, licensed elec-
trician and trained installation expert to ensure compliance with local building practices,
climate conditions, safety standards, and state and local codes.

The Smartlet Charging Station should be installed only by a licensed contractor and a
licensed electrician and in accordance with the U.S. National Electric Code and the
National Fire Protection Association codes and standards. The Smartlet Charging Station
should be inspected by an authorized installer prior to the initial use.
Under no circumstances will compliance with the information in this manual relieve the
user of his/her responsibility for compliance with all applicable codes or safety standards.
No Guarantee as to Accuracy
Reasonable effort was made to ensure that the specifications and other information in this
manual were accurate and complete at the time of its publication. However, the specifica-
tions and other information in this manual are subject to change at any time without prior
notice.
Warranty Information and Disclaimer
Your use of or modification to the Smartlet Charging Station in a manner in which the
Smartlet Charging Station is not intended to be used or modified will void the limited
warranty. Other than any such limited warranty, the Coulomb products are provided “AS
IS,” and Coulomb and its distributors expressly disclaim all implied warranties, including
any warranty of design, merchantability, fitness for a particular purposes and non-
infringement, to the maximum extent permitted by law.
Limitation of Liability
IN NO EVENT SHALL COULOMB TECHNOLOGIES, INC. OR ITS AUTHORIZED DISTRIBUTORS
BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES, INCLUDING WITHOUT LIMITATION LOST PROFITS, LOST DATA, LOSS OF USE,
COST OF COVER, OR LOSS OR DAMAGE TO THE SMARTLET CHARGING STATION, ARISING
OUT OF OR RELATING TO THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF COULOMB
TECHNOLOGIES, INC. OR ITS AUTHORIZED DISTRIBUTORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Trademarks
COULOMB TECHNOLOGIES, SMARTLET, and CHARGEPOINT are trademarks or service
marks of Coulomb Technologies, Inc in the U.S. and other countries. All other trademarks
or service marks mentioned in this manual or on the Coulomb Technologies, Inc. website
are the property of their respective owners.

Coulomb CT1000 Wall Mount Smartlet Installation Instructions Revision 0.1 PRELIMINARY

CT1000 Wall Mount Smartlet Template

2.50"
63.50 mm
Ø 0.28"
7.00 mm
6 PLC

5.50"
139.70 mm
NOT TO SCALE

15.75"
400.00 mm

5.50"
139.70 mm

Height to bottom of bracket 38” (965.20mm)
(USA ADA height is 48” to display)
Coulomb CT1000 Wall Mount Smartlet Installation Instructions Revision 0.1 PRELIMINARY

Use these 3 screws

White Black Green
Neutral Hot Ground
120VAC Input
Requires 15A branch circuit and overcurrent protection on supply

Wire Connection Label

Coulomb CT1000 Wall Mount Smartlet Installation Instructions Revision 0.1 PRELIMINARY

Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.

Caution: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

Document Created: 2009-02-20 17:44:45
Document Modified: 2009-02-20 17:44:45

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC