Modular Approval Letter

FCC ID: W2Z-03000008

Cover Letter(s)

Download: PDF
FCCID_4259080

FUJiFILM Value from Innovation Declaration of the Modular Approval Applicant / Grantee FUJIFILM Corporation FCC ID: Ww2Z—03000008 Model: BM—8761ATT The single module transmitter has been evaluated then tested meeting the requirements under Part 15C Section 2.12 as below: Modular approval requirement EUT Condition Comply (a) The radio elements of the modular This module has shielding case, cover YES transmitter must have their own all needed item. shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. (b) The modular transmitter must have The module has mechanism to control the YES part 15 requirements. buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over— modulation. (c) The modular transmitter must have its Internal PWM in module chipset. YES own powerflsupply regulation. (d) The modular transmitter must comply The modular transmitter comply with YES with the antenna and transmission the antenna (PCB antenna with system requirements of Sections 1.49dBi gain) and transmission 15.203, 15.204(b) and 15.204(c). The system requirements of Sections antenna must either be permanently 15.203, 15.204(b) and 15.204(c). attached or employ a "unique" antenna coupler (at all connections between the module and the antenna, including the cable). The "professional installation" provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. (e) The modular transmitter must be tested The modular transmitter was tested in YES in a stand—alone configuration, /.e., the a stand—alone configuration via a USB extender. Please see the photo of test module must not be inside another configuration, the module was device during testing for compliance with plugged in this extender. part 15 requirements. Unless the transmitter module will be battery

FUJiFILM Value from Innovation powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)) must not be inside another device during testing. (f) The modular transmitter must be The Module has fix label displaying YEs eq_uipped with either a permanently FCC ID on the manual and package affixed label or must be capable of . . electronically displaying its FCC due to the extremely small dimension identification number. of EUT. (g) The modular transmitter must comply This module has user‘s manual and is yes with any specific rules or operating compliant with all applicable FCC requirements that ordinarily apply to a rule:s. [_)e_tan mstrughons for . R . maintaining compliance are given in complete transmitter and the the manual. manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization requirements, which are based on the intended use/configurations. (h) The modular transmitter must comply Can fulfill the RF exposure YEs with any applicable RF exposure requirements in its final configuration. requirements in its final configuration.

FUJIFILM Value from Innovation Dated 2019 —04— 01 By: % Takao Ozaki ")zhun é% & Signaturé Printed Title: Senior Expert On behalf of: FUJIFILM Corporation Telephone: +81—3—6271—1654


Document Created: 2019-04-10 16:43:59
Document Modified: 2019-04-10 16:43:59
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC