RF Exposure Report

FCC ID: W2Z-03000006

RF Exposure Info

Download: PDF
FCCID_4236961

Report No. 1920024R-SAUSP03V00 RF Exposure Evaluation declaration Product Name : HYBRID INSTANT CAMERA Model No. : INSTAX MINI HM1 FCC ID : W2Z-03000006 Applicant : FUJIFILM CORPORATION Address : 7-3,Akasaka 9-chome,Minato-ku,Tokyo 107-0052,Japan Date of Receipt : Feb. 11, 2019 Date of Declaration : Mar. 06, 2019 Report No. : 1920024R-SAUSP03V00 Report Version : V0.2-Draft The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Page: 1 of 4

Report No. 1920024R-SAUSP03V00 Issued Date: Mar. 06, 2019 Report No.: 1920024R-SAUSP03V00 Product Name HYBRID INSTANT CAMERA Applicant FUJIFILM CORPORATION Address 7-3,Akasaka 9-chome,Minato-ku,Tokyo 107-0052,Japan Manufacturer ABILITY ENTERPRISE CO., LTD. Model No. INSTAX MINI HM1 FCC ID. W2Z-03000006 Trade Name FUJIFILM Applicable Standard FCC 47 CFR 1.1307 KDB 447498 D01 v06 Test Result Complied Documented By : ( Adm. Assistant / Peggy Tu ) Tested By : (Senior Engineer / Vorana Chen) Approved By : ( Director / Vincent Lin ) Page: 2 of 4

Report No. 1920024R-SAUSP03V00 1. GENERAL INFORMATION 1.1. EUT Description Product Name HYBRID INSTANT CAMERA Model No. INSTAX MINI HM1 Trade Name FUJIFILM FCC ID W2Z-03000006 Frequency Range 2402-2480MHz Number of Channels V2.1+EDR:79, V4.2:40 Data Speed BT: 3Mbps, BLE: 1Mbps Type of Modulation V2.1+EDR: GFSK(1Mbps) /π/4DQPSK(2Mbps) / 8DPSK(3Mbps) V4.2: GFSK(1Mbps) Antenna Type Print on PCB Antenna Channel Control Auto Antenna Gain Refer to the table “Antenna List” 1.2. Antenna List : No. Manufacturer Part No. Antenna Type Peak Gain 1 Ability N/A Print on PCB Antenna 1.5dBi for 2.4GHz 1.3. Conducted Power Measurement (Including tolerance allowed for production unit): SISO-Main(TX1) SISO-Aux(TX2) Bluetooth mode maximum output power Standard Mode BW PK AV AV PK AV AV CH CH Power Target Power Power Target Power 0 6.48 6 5.19 0 N/A N/A N/A Normal GFSK 39 7.31 6 5.91 39 N/A N/A N/A 78 7.27 6 5.92 78 N/A N/A N/A 0 8.13 6 4.45 0 N/A N/A N/A 15.247 EDR 8DPSK 39 8.73 6 5.17 39 N/A N/A N/A (2.4GHz) 78 8.69 6 5.18 78 N/A N/A N/A 0 6.71 7.5 6.20 0 N/A N/A N/A BLE GFSK 19 7.46 7.5 7.00 19 N/A N/A N/A 39 7.54 7.5 7.10 39 N/A N/A N/A Page: 3 of 4

Report No. 1920024R-SAUSP03V00 2. RF Exposure Evaluation 2.1. Standard Applicable According to 1.1307 (b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. 2.2. Measurement Result: According to KDB Publication 447498 D01, section 4.3.1, per the calculations of item 1 (Power(mW)/separation (mm)*sqrt(f(GHz)≤3.0), SAR is required as shown in the table below where calculated values are greater than 3.0: 1.) Operation frequency = 2480MHz and antenna separation distance = 5mm, SAR Test Exclusion Threshold = 10mW Maximum AV output power SAR Test Frequency Band Peak Gain: 1.5dBi Exclusion Threshold Calculated Threshold Value (MHz) Target EIRP EIRP (≦3.0 SAR is not required) (mW) (dBm) (dBm) (mW) 2480 7.5 9 7.94 10 2.502 Note1: The SAR/MPE measurement is not necessary. Note2: The conducted maximum peak output power is refer to report No.: 1920024R-SACAP01V00 from the DEKRA. Page: 4 of 4


Document Created: 2019-04-10 15:19:53
Document Modified: 2019-04-10 15:19:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC