USERS MANUAL

FCC ID: W2Z-02000001

Users Manual

Download: PDF
FCCID_1624201

FZ09396-100 User’s Manual -1-

Notice: This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help The host device shall also comply with the certification labeling requirements of each of the modules it contains. A reference to the enclosed module displaying its FCC and IC ID certification number. Recommended wording: * Contains FCC ID: W2Z-02000001 * Contains IC ID: 7736B-02000001

（ 1 ） APPROVED BY CHECKED BY DESIGNED BY SPECIFICATON 技術部 '10.11.28 統括課長 技術部 '10.11.28 主幹 内田 技術部 '11.11.28 和気 町田 MODEL: DWM-W078 Formed on. 2011.11.28 This products Standard shall be applied to the Wireless LAN module(DWM-W078) 本規格は、無線LANモジュール(DWM-W078)について規定する。 Contents. No. Item Page No. Item Page 1 Product summary 2 1-1 Scope 2 1-2 General explanation 2 2 Hardware specification 3 2-1 Block diagram 3 2-2 Environmental condition 3 2-3 Power supply 3 3 Electrical characteristics 4-10 3-1 Channel plan 4 3-2 Power Sequence 4 3-3 Interface specification 4 3-4 SDIO Protocol Timing 5 3-5 Current consumption 6 3-6 Antenna specification 7 3-7 Reciever characteristics 7 3-8 Transmitter characteristics 8-10 4 Measurement method 11 4-1 Tx test condition 11 4-2 Rx test condition 11 5 Mechanical specification 12 5-1 Dimension 12 5-2 Weight 12 5-3 Terminal number and name 12 6 Reliability Test 13 7 Revision 14 SYM. GROUP NO. DWG.NO. S 19 0980 ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 1

（ 2 ） 1.Product Summary 製品概要 1-1. Scope 2.4 GHz WLAN module with integrated antenna (IEEE802.11 b/g/n supported） 2.4GHz帯 アンテナ一体 無線LANモジュール (IEEE802.11 b/g/n 準拠） 1-2. General explanation Standard IEEE802.11ｂ/ｇ/n Frequency 2.4-2.4835GHz Host Interfase SDIO ver2.0 Frequency Bandwidth 20MHz Weight 0.5g typ ・Chipset: MARVELL Semiconductor Inc. 88W8787L（CPS Package） ・Modulation Types: DBPSK, DQPSK and CCK with 802.11b mode OFDM(BPSK, QPSK, 16-QAM and 64-QAM) with 802.11g/n mode ・Data rate: 1,2,5.5 and 11 with 802.11b mode 6,9,12,18,24,36,48 and 54 with 802.11g mode MCS0-7 with 802.11n mode ・Security: WEP(64 and 128bits), WPA-PSK(TKIP/AES) and WPA2-PSK(TKIP/AES) DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

（ 3 ） 2.Hardware Specification 2-1. Block diagram ブロック図 Anntena SDIO I/F RF TX Power PMU(1.2V) VIO Amp RF Switch Pdn LPF DPDT Connector RF Switch 88W8787L MARVELL 88W8787 (CSP) HostWakeup RF RX VDD33 +1.8V 32kHz Serial 38.4MHz RTC Clock EEPROM XTAL LDO 2-2. Environmental condition 環境条件 1) Operating environment 動作環境条件 Operating temperature range 動作温度範囲 : -20 ～ 70 ℃ Operating humidity range 動作湿度範囲 : 20%～80%(None dew) 結露無き事 2) Storage environment 保存環境条件 Storage temperature range 保存温度範囲 : -30 ～ 85 ℃ Storage humidity range 保存湿度範囲 : 20%～85%(None dew) 結露無き事 2-3. Power supply No Symbol Value UNIT MIN． TYP． MAX． 1 VDD33 2.97 3.30 3.63 V 1.62 1.80 1.98 V 2 VIO 2.50 2.60 2.70 V 2.97 3.30 3.63 V DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

（ 4 ） 3.Electrical Characteristics 電気的特性 3-1. Channel Plan チャンネルプラン IEEE802.11b/g/n(HT20) CH ID Freq CH ID Freq CH ID Freq 1 2412 MHz 6 2437 MHz 11 2462 MHz 2 2417 MHz 7 2442 MHz 12 2467 MHz 3 2422 MHz 8 2447 MHz 13 2472 MHz 4 2427 MHz 9 2452 MHz 5 2432 MHz 10 2457 MHz 3-2. Power Sequence 電源仕様 3-2-1. Recommended power on timing 電源投入推奨タイミング T0 VDD33 T1 VIO T4 T3 Pdn T2 T2 Host controll enable T0≧0ms T1 ≧ 750ms T2 ≧ 4ms T3 ≧ 0ms T4 ≧ 250ms 3-2-2. Recommended power off timing 電源切断推奨タイミング T6 VDD33 VIO T5 Pdn T5 ≧ 0ms T6 ≧ 0ms 3-3. Interface specification (SDIO) Parameter Min Typ Max Units Input high voltage 0.7*VIO - VIO+0.3 V Input low voltage -0.3 - 0.3*VIO V Input hysteresis 200 - - mV Output high voltage VIO-0.4 - - V Output low voltage - - 0.4 V DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

（ 5 ） 3-4. SDIO Protocol Timing 3-4-1 Normal Mode fpp Twl Twh Tisu Tih Todly 3-4-2 High Speed Mode fpp Twl Twh Tisu Tih Todly Toh 3-4-3. SDIO Timing Data Symol Parameter Mode Min Typ Max Units Normal 0 - 25 MHz fpp Clock Frequency High Speed 0 - 50 MHz Normal 10 - - ns Twl Clock Low Time High Speed 7 - - ns Normal 10 - - ns Twh Clock High Time High Speed 7 - - ns Normal 5 - - ns Tisu Input Setup Time High Speed 6 - - ns Normal 5 - - ns Tih Input Hold Time High Speed 2 - - ns Todly Output Delay Time - - - 7.33 ns Toh Output Hold Time High Speed 2.5 - - ns DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

（ 6 ） 3-5. Current consumption 消費電流 TX mode 送信時消費電流 Current Consumption(mA) Standard Data rate VIO VDD33 3.3V 1.8V Typ. Max. Typ. Max. Typ. Max. 802.11b 11Mbps 220 260 0.33 - 0.092 - @14dBm 802.11g 54Mbps 220 260 0.33 - 0.070 - @12dBm 802.11n HT20 MCS7 220 260 0.33 - 0.051 - @12dBm RX mode 受信時消費電流 Current Consumption(mA) Standard Data rate VIO VDD33 3.3V 1.8V Typ. Max. Typ. Max. Typ. Max. 802.11b 11Mbps 140 180 0.33 - 0.391 - 802.11g 54Mbps 140 180 0.33 - 1.600 - 802.11n HT20 MCS7 140 180 0.33 - 1.500 - Power Save Mode Current Consumption(mA) VIO Standard VDD33 3.3V 1.8V Typ. Typ. Typ. DTIM=1 4.103 0.546 0.001 DTIM=3 1.662 0.586 0.001 Deep sleep 0.400 0.603 0.001 Pdn 0.053 0.349 0.183 DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

（ 7 ） 3-6. Antenna specification (Referential specification) アンテナ特性（参考特性） DSC set installed DSCセット組み込み時 Standard MIN TYP MAX Unit Frequency Band 周波数帯域 2412 － 2472 MHz Impedance Nominal 50 インピーダンス 公称 50 Ω ＶＳＷＲ － 2.5 3.0 ※アンテナ共振周波数調整はDSCセット組み込みで行っております。 モジュール単体特性での保証ではございません。 疑義が生じた場合、ＤＳＣセット組み込みを行い確認を行う事とする。 Antenna resonant frequency is adjusted with DSC set installed. This does not guarantee specification of the module alone. In case of doubt, verification will be perfomed with DSC set installed. 3-７. Receiver characteristics 受信特性 1)Minimum Receiver Sensitivity 最小受信感度 (Ta=25℃) Standard Data rate MIN. TYP. MAX. Unit PER 1 Mbps - -94 -80 dBm 8 % 2 Mbps - -91 -80 dBm 8 % 802.11b 5.5 Mbps - -88 -76 dBm 8 % 11 Mbps - -84 -76 dBm 8 % 6 Mbps - -87 -82 dBm 10 % 9 Mbps - -87 -81 dBm 10 % 12 Mbps - -85 -79 dBm 10 % - -83 -77 dBm 802.11g 18 Mbps 10 % 24 Mbps - -80 -74 dBm 10 % 36 Mbps - -79 -70 dBm 10 % 48 Mbps - -73 -66 dBm 10 % 54 Mbps - -71 -65 dBm 10 % MCS0 - -86 -82 dBm 10 % MCS1 - -83 -79 dBm 10 % MCS2 - -81 -77 dBm 10 % 802.11n MCS3 - -79 -74 dBm 10 % HT20 MCS4 - -75 -70 dBm 10 % MCS5 - -71 -66 dBm 10 % MCS6 - -69 -65 dBm 10 % MCS7 - -67 -64 dBm 10 % 2）Maximum Receiver Sensitivity 最大受信感度 (Ta=25℃) Standard Data rate MIN. TYP. MAX. Unit PER 1M，2M -4 802.11b - - dBm 8% 5.5M，11M -10 802.11g 6M～54M -20 - - dBm 10% 802.11n MCS0～7 -20 - - dBm 10% HT20 DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

( 8 ) 3-8. Transmitter characteristics ／ 送信特性 1)Output Target Power Levels 出力レベル The difference of the output is within ±2.5dB. (Ta=25℃) 出力公差は、±2.5ｄB以内(Ta=25℃)の事 1) - 1 2.4GHz Band 11b (DSSS) Freq. Target Power (dBm) Ch (MHz） 1M 2M 5.5M 11M 1 2412 14 14 14 14 2 2417 14 14 14 14 3 2422 14 14 14 14 4 2427 14 14 14 14 5 2432 14 14 14 14 6 2437 14 14 14 14 7 2442 14 14 14 14 8 2447 14 14 14 14 9 2452 14 14 14 14 10 2457 14 14 14 14 11 2462 14 14 14 14 12 2467 14 14 14 14 13 2472 14 14 14 14 1) - 2 2.4GHz Band 11g (OFDM) Ch Freq. Ｔａｒｇｅｔ Power (dBm) (MHz） 6M 9M 12M 18M 24M 36M 48M 54M 1 2412 10 10 10 10 10 10 10 10 2 2417 12 12 12 12 12 12 12 12 3 2422 12 12 12 12 12 12 12 12 4 2427 12 12 12 12 12 12 12 12 5 2432 12 12 12 12 12 12 12 12 6 2437 12 12 12 12 12 12 12 12 7 2442 12 12 12 12 12 12 12 12 8 2447 12 12 12 12 12 12 12 12 9 2452 12 12 12 12 12 12 12 12 10 2457 12 12 12 12 12 12 12 12 11 2462 10 10 10 10 10 10 10 10 12 2467 12 12 12 12 12 12 12 12 13 2472 12 12 12 12 12 12 12 12 DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

（ 9 ） 1) - 3 2.4GHz Band 11n/HT20 (OFDM) Freq. Target Power (dBm) Ch (MHz） MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 1 2412 10 10 10 10 10 10 10 10 2 2417 12 12 12 12 12 12 12 12 3 2422 12 12 12 12 12 12 12 12 4 2427 12 12 12 12 12 12 12 12 5 2432 12 12 12 12 12 12 12 12 6 2437 12 12 12 12 12 12 12 12 7 2442 12 12 12 12 12 12 12 12 8 2447 12 12 12 12 12 12 12 12 9 2452 12 12 12 12 12 12 12 12 10 2457 12 12 12 12 12 12 12 12 11 2462 10 10 10 10 10 10 10 10 12 2467 12 12 12 12 12 12 12 12 13 2472 12 12 12 12 12 12 12 12 2)EVM ITEM Max Unit 11b 1 Mbps -9 35.0 dB % 11b 2 Mbps -9 35.0 dB % 11b 5.5 Mbps -9 35.0 dB % 11b 11 Mbps -9 35.0 dB % 11g 6 Mbps -5 56.2 dB % 11g 9 Mbps -8 39.8 dB % 11g 12 Mbps -10 31.6 dB % 11g 18 Mbps -13 22.4 dB % 11g 24 Mbps -16 15.8 dB % 11g 36 Mbps -19 11.2 dB % 11g 48 Mbps -22 7.9 dB % 11g 54 Mbps -25 5.6 dB % 11n HT20 MCS0 -5 56.2 dB % 11n HT20 MCS1 -10 31.6 dB % 11n HT20 MCS2 -13 22.4 dB % 11n HT20 MCS3 -16 15.8 dB % 11n HT20 MCS4 -19 11.2 dB % 11n HT20 MCS5 -22 7.9 dB % 11n HT20 MCS6 -25 5.6 dB % 11n HT20 MCS7 -28 4.0 dB % DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

（ 10 ） 3)Spectrum Mask ITEM Max Unit DS 0MHz～±11MHz 0 dBr DS ｆ±11MHz～±22MHz -28 dBr DS f±22MHz～ -50 dBr OFDM 0MHz～±9MHz 0 dBr OFDM f±11MHz -20 dBr OFDM f±20MHz -28 dBr OFDM f±30MHz -40 dBr HT20 0MHz～±9MHz 0 dBr HT20 f±11MHz -20 dBr HT20 f±20MHz -28 dBr HT20 f±30MHz -45 dBr <DS> <OFDM> -20dBr -28dBr -28dBr <HT40> -50dBr -40dBr <HT20> -20dBr -28dBr -45dBr 4)Frequency Accuracy 周波数偏差 Condition Min Typ Max Unit Ta = 25℃ -10 - 10 ppm Ta =-20℃～70℃ -25 - 25 ppm DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

（ 11 ） 4.Measurement method 測定方法 Standard test shall be conducted under the following conditions. However, if no question arises as to judgment, the test can be conducted in the range of temperature 20℃-30℃ and relative humidity 45%-70%. Measurement needs to be performed in a shield room. 標準試験は、下記の条件で行うものとする。但し、判定に疑義を生じない場合は、温度20℃～30℃ 相対湿度45%～70%の範囲にて試験してもよい。 測定は、シールドルーム内で行うこと。 Temperature 温度 ： 25±3℃ Humidity 湿度 ： 65±10% Power supply voltage 3.3V ：Refer to 2-3. 2-3を参照の事 電源電圧 4-1. TX test condition. 送信試験環境 SDIO/IF Coaxial PC ------------ ---------------- DUT --------------Spectrum Analyzer RF Switch OR Connector Power Meter OR WLAN Tester 4-2. RX test condition 受信試験環境 SDIO/IF Coaxial Golden unit -------------- DUT --------- ATT ---- PC --------- ---- PC RF Switch OR Connector Signal generator OR WLAN Tester DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

（ 12 ） 5. Mechanical Specifications 機械的仕様 5-1. Dimension 寸法 9.0mm×19.5mm, t= 1.6mm MAX 5-2. Weight 重量 Typical 0.5g 5-3. Terminal number and name 端子・端子名 Connector model コネクタ型名： 14FZ-SM1-GAN-TB JST No. Name Type Function 1 Pdn IN H/W reset 2 VIO POWER I/F power supply 3 SD_CMD IO SDIO command 4 SD_D0 IO SDIO data 0 5 SD_D1 IO SDIO data 1 6 GND GND GND 7 SD_CLK IO SDIO clock 8 GND GND GND 9 SD_D3 IO SDIO data 3 10 SD_D2 IO SDIO data 2 11 GND GND GND 12 VDD33 POWER Main power supply 3.3V 13 VDD33 POWER Main power supply 3.3V 14 Host WakeUp OUT Host wake up DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1

（ 13 ） 6.Reliability Test 信頼性試験 NO Item 項目 Test Conditions 試験条件 1 Low temperature Operates properly after 1000 hours at -30℃, followed by more than 2 hours at ambient temperature/humidity. storage -30℃、1000時間放置、その後常温常湿中に取り出し、2時間以上放置後に、正 低温放置 常に動作する事。 2 High temperature Operates properly after 1000 hours at +85℃, followed by more than 2 hours at ambient temperature/humidity. storage ＋85℃、1000時間放置、その後常温常湿中に取り出し、2時間以上放置後に、正 高温放置 常に動作する事。 High temperature Operates properly after 1000 hours at +85℃, 85%RH followed by more than 2 hours at ambient temperature/humidity . 3 humidity storage ＋85℃、85％RHにて1000時間放置、その後常温常湿中に取り出し、2時間以上 高温高湿放置 放置後に正常に動作する事。 4 Low temperature Operates properly after 500 hours at -20℃, followed by more than 2 hours at ambient temperature/humidity . operation -20℃で、500時間通電放置、その後常温常湿中に取り出し、2時間以上放置後 Test condition: No condensing 低温動作 に、正常に動作する事。 試験条件：露無き事。 5 High temperature Operates properly after 500 hours at +70℃, followed by more than 2 hours at ambient temperature/humidity. operation ＋70℃で、500時間通電放置、その後常温常湿中に取り出し、2時間以上放置後 高温動作 に、正常に動作する事。 6 High temperature Operates properly after 1000 hours at +60℃, 90%RH followed by more than 2 hours at ambient temperature/humidity . humidity operation ＋60℃、90％RHにて1000時間通電放置、その後常温常湿中に取り出 高温高湿動作 し、2時間以上放置後に正常に動作する事。 7 Operates properly after 100 cycles where one cycle is -30℃/30 min and Thermal impact +85℃/30min. test 熱衝撃試験 -30℃/30分、+85℃/30分を1サイクルとして、100サイクル実施後、正常に動作す る事。 8 Test conditions/試験条件： Electrostatic Non operating state/製品非動作状態 ±2.0kV applied to connector terminal and antenna terminal ±2.0kV、印 discharge Discharged capacity /放電容量：100pF 加箇所；コネクタ端子、アンテナ端子 Discharged resistance /放電抵抗：1.5kΩ 静電気放電 Application ／印加回数：3回 9 Free drop three times on hard wooden board from 50 cm. Must operate Alone normally. Appearance: no functional damage. 単体落下 木板に対して、50cm高さより自然落下。3回。JIS C 60068-2-32に従う。 Drop test 動作上問題なき事。/外観：実使用上問題なき事。 落下試験 Total five drops on bottom and sides of carton on hard wooden board from Packaged 50 cm. Must operate normally. Appearance: no functional damage. 梱包落下 木板に対して、50cm高さより自然落下。 梱包箱底面及び側面 計5回 10 Must operate normally after vertical and two horizontal direction vibration for 2 hrs each at Vibration test frequency 10-50 Hz, amplitude 1.5 mm P-P. 振動試験 振動周波数 10～50Hzにて、振幅1.5mmP-Pとし、上下：2ｈ，左右：2h，前後：2hにて加振後、 正常に動作する事。 11 Package vibration Must operate normally after testing under conditions listed below. test 欄外に示す条件にて試験を行い、試験後正常に動作する事. 梱包振動試験 Package vibration test conditions./梱包振動試験条件 Frequency[Hz] Level[(ms^2)^2/Hz] Slope[dB/oct] Test Direction Test Duration 3 0.048 - 3～6 - +13.75 6～18 1.15 - 4 hours each Three directions direction 18～40 - -9.34 X,Y,Z 各方向 40 0.096 - 3方向 4時間 40～200 - -1.29 200 0.048 - DWG.NO. ＭＩＴＳＵＭＩ ＥＬＥＣＴＲＩＣ ＣＯ．，ＬＴＤ． 0980 1


Document Created: 2012-01-18 14:34:27
Document Modified: 2012-01-18 14:34:27
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC