User Manual

FCC ID: VYY-DC1673

Users Manual

Download: PDF
FCCID_2720831

A Matchable R tubular motor set up After matching code for new emitter, it will clear all the data in the motor Additional function During the settings, the time between two operation DC1672 DC1673 must be shorter than 4s, otherwise it will quit the setting Up button ×1 Sound tip three times Emitter Specification OK (P1+button +Reserved button)×2 Setting is ok. The up button control the motor clockwise Hear long sound Hear di di... Version NO. : A/02 T Type specification Setting button=P1+ button +Reserved button Power on Down button ×1 Sound tip three times Technical support OK Setting is ok. The down button control LCD screen LCD screen the motor clockwise P1+ Up P1+ Up A Matchable DC1680 / DC1681 set up button button button button Additional function During the settings, the time between two operation Reserved Stop Reserved Stop must be shorter than 6s, otherwise it will quit the setting button button button button (Up button +Down button)×2s Stop button×1 Up button×1 See indicator See indicator See indicator P1- Down P1- Down flashing long flashing flashing button button button button OK Setting is ok Power on Receiver Receiver Emitter DC1672 DC1673 5 - channel LCD emitter 15 - channel LCD emitter A Matchable DC136 set up Additional function During the settings, the time between two operation must be shorter than 10s, otherwise it will quit the setting Stop button×1 Up button×1 P2×1 See green in- See indicator See indicator dicator flashing T Technical support flashing long flashing and extinguished OK Technical Setting support is ok Power on Receiver Receiver Emitter Technical specification Fucntion instruction Input voltage碋3V(CR2430) Transmitting frequency碋433MHz Transmitter: five channels (DC1672), fifteen channels (DC1673). One number of LCD screen means one control channel. Press “channel choose” button P1- (number descending) or P1+ (number increasing) to change the channel. On A The valid channels selection In the setting state,press the up or down button you can quit quickly, if you want to change the valid channels ,reset it. the analogy of this, loose finger when the indicator light move to suitable Transmitting power碋10 milliwatt channel that you select effective channel. If LCD screen number show “0” Additional that means all channels if effective (group control state). function Operating temperature碋-50C—500C Transmssion distance碋200 meters open office硽 Press P1+button or P1-button, (P1+button+ P1+button+P1- selecting the channel (channe l Stop×1 Notice: transmitter do not exposed to moisture and strike, so as not to affect life. 35 meters on two walls When you use transmitter, if found emission distance obviously short or less sensitive, P1-button)×1 button,hold on please change another same new battery. Please have batteries for recycling. 1 to channel 15) you need The screen The screen The screen will display C will display 15 will display o Or OK Setting is ok

FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ǂ Reorient or relocate the receiving antenna. ǂ Increase the separation between the equipment and receiver. ǂ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ǂ Consult the dealer or an experienced radio/TV technician for help.


Document Created: 2015-08-13 08:49:45
Document Modified: 2015-08-13 08:49:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC