test setup photo.pdf

FCC ID: VW3-ATGHMP915V2

Test Setup Photos

Download: PDF
FCCID_4491072

FCC ID: VW3-ATGHMP915V2 IC: 9140A-ATGHMP915V2 15. HYBRID MODE 125KHZ : POWER SPECTRAL DENSITY 15.1. TEST CONDITIONS Test performed by : Julien Palard Date of test : September 17, 2019 Ambient temperature : 25 °C Relative humidity : 48 % 15.2. TEST SETUP - The Equipment Under Test is installed: R On a table £ In an anechoic chamber - Measurement is performed with a spectrum analyzer in: R Conducted Method £ Radiated Method - Test Procedure: £ KDB 558074 D01 DTS Meas Guidance v05 § 10.2 (Method PKPSD) £ KDB 558074 D01 DTS Meas Guidance v05 § 10.3 (Method AVGPSD-1) R ANSI C63.10 § 11.10.3 Photograph for Power Spectral Density TEST REPORT N° 163216-741765 Version : 01 Page 55/107

Photograph for Unwanted Emission into non-restricted frequency bands 17.3. LIMIT All Spurious Emissions must be at least 30dB below the Fundamental Radiator Level 17.4. TEST EQUIPMENT LIST DESCRIPTION MANUFACTURER MODEL N° LCIE Cal_Date Cal_Due Cable Conducted S36 TELEDYNE 084-0555-2MTR A5329758 2019/02 2020/02 chamber Attenuator 3dB Cable - WA54-3-12 A7122223 2019/02 2020/02 Spurious Conducted High Pass Filter 868MHz WAINWRIGHT WHKX12-935 A7484069 2017/10 2019/10 Multimeter KEITHLEY 2000 A1241084 2018/12 2020/12 See See Power supply KIKUSUI PCR500M A7049006 Multimeter Multimeter EMI receiver ROHDE & SCHWARZ FSV40GHz A4060061 2019/05 2021/05 Note: In our quality system, the test equipment calibration due is more & less 2 months TEST REPORT N° 163216-741765 Version : 01 Page 62/107

Photograph for Unwanted Emission in restricted frequency bands TEST REPORT N° 163216-741765 Version : 01 Page 98/107

Photograph for Unwanted Emission in restricted frequency bands TEST REPORT N° 163216-741765 Version : 01 Page 99/107


Document Created: 2019-09-23 15:46:47
Document Modified: 2019-09-23 15:46:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC