Modular Approval Letter

FCC ID: VUJATR2000S1

Cover Letter(s)

Download: PDF
FCCID_1929727

ATID Co., Ltd. #1210 Byuksan/Gyungin digital valley II #481-10 Gasan-Dong, Gumchon-Gu, Seoul 153-803, Korea Timco Engineering, Inc. March 12, 2013 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Modular Approval Attestation for Transceiver Module. Applicant: ATID Co., Ltd. FCC ID: VUJATR2000S1 No. FCC requirements 1 Have its own RF shielding RF Block shielded by Metal Case Have buffered modulation/data inputs 2 Yes, the module has buffered data input. (if such inputs are provided), The modular transmitter must have its own power supply 3 We used self own power supply regulation. regulation. This module meets the antenna requirements of 4 Meet the antenna requirements of section 15.203 section 15.203. Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines Yes, the EUT (module) was tested a stand alone 5 must be connected to the module but, the module configuration. must not be inside another case during testing Be labeled with its own FCC ID number, and if the The proposed FCC ID label format is to be placed on FCC ID is not visible when the module is installed the module. If FCC ID label is not visible when 6 inside another device, then the outside of the device module is install into the system, “Contains FCC ID: into which the module is installed must also display a VUJATR2000S1” shall be placed on the outside of label referring to the enclosed module. final product. The modular transmitter is manufactured so that the It complies with specific rules or operating user can not influence the operation of the transmitter 7 requirements. And instruction is included User that will operate outside of the scope of the manual. regulations. Address compliance with the Commission`s RF exposure limits in Sections 1.1310 and 2.1093. In addition, spread spectrum transmitters operation The RF exposure limit is addressed in RF Exposure 8 under Section 15.247 are required to address RF Calculation. exposure compliance in accordance with Section 15.247(b)(4) Sincerely, Namjoong KIM Manager


Document Created: 2013-03-21 15:09:31
Document Modified: 2013-03-21 15:09:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC