Users Manual

FCC ID: VUJAT911N

Users Manual

Download: PDF
FCCID_3012027

AT911N USER GUIDE Series Highlights: • Android 4.2. • ALLWINNER A20 Dual-Core 1GHz • Memory RAM 1GB / ROM 8 GB • WVGA TFT LCD 480W x 800L with backlight • UHF 900MHz GEN2, ISO/IEC 18000-6C • 1D and 2D IMAGE Laser Barcode Scanner • WLAN(IEEE802.11 a/b/g/n) • GSM/GPRS/WCDMA/HSDPA/HSPA+/3G • Bluetooth Class II, v4.0 • 5.0M Camera • GPS with internal antenna

User Manual Guide Before You Begin .................................................................................................................... 4 Chapter 1. Caution when using ................................................................................................ 5 1. How to use the battery correctly .......................................................................................... 5 2. Caution when using ............................................................................................................. 5 Chapter 2. Products compositions ........................................................................................... 6 1. Package components ......................................................................................................7~8 Chapter 3. Package components ............................................................................................. 9 1. Package components........................................................................................................... 9 1.1 Detaching and Attaching Main Battery ................................................................... 9 1.2 Charging ............................................................................................................... 10 1.3 Low power mode(Sleep mode) ............................................................................. 11 1.4 Battery replacement ............................................................................................. 11 2. System reset (restart) ....................................................................................................... 12 2.1 Cold Reset ............................................................................................................ 12 3. Use Micro SD, SIM, SAM cards ........................................................................................ 13 3.1 Micro SD Card installation ......................................................................................... 13 3.2 Install SIM card.......................................................................................................... 13 4. System settings ................................................................................................................. 14 4.1 Set screen brightness ........................................................................................... 15 4.2 Set sound volumes ............................................................................................... 15 5. Use keypad ........................................................................................................................ 16 5.1 Use keypad ........................................................................................................... 16 5.2 Keypad button execution ...................................................................................... 16 제 4 장. Use Peripheral Device............................................................................................... 16 1. 1D and 2D barcode scanner .............................................................................................. 17 1.1 Read 1D or 2D barcode ............................................................................................ 17 1.2 Set barcode keyboard .............................................................................................. 17 1.3 Barcode scanning ..................................................................................................... 18 2. WLAN connection .............................................................................................................. 19 2.1 1Turn Wi-Fi on / Turn Wi-Fi off ................................................................................ 19 3. Bluetooth ........................................................................................................................... 20 3.1 Bluetooth beginning and end .................................................................................... 20 4. GPS Module ....................................................................................................................... 21 4.1 GPS Demo Program execution .................................................................................. 21 5. Use camera ....................................................................................................................... 22 5.1 Use camera ............................................................................................................... 22 6. Use UHF ............................................................................................................................ 22 6.1 UHF 900Mhz RFID program ....................................................................................... 23 Chapter 5. Appendix .............................................................................................................. 24 Product Specification .......................................................................................................24~25 2 AT911N User Guide

Before You Begin This user manual is protected by copyright. This manual is published by ATID Co., Ltd. and can only be copied, edited or distributed by ATID. Some contents in the manual may be slightly different from the actual device. The contents in the manual is subject to change without notice. This manual is written for the person who is responsible for installing, configuring, and maintaining the AT911N. It provides you with information about the features of the AT911N, and how to install, configure, operate, and maintain it. Safety information Your safety is extremely important. Read and follow all warnings and cautions in this document before you handle and operate ATID equipment. If you do not follow the safety warnings and cautions, you might be seriously injured, and the equipment and data are also might be damaged.  WARNING A warning requires you must pay attention to the operating procedure, practice, condition, and statement strictly, or might be injured seriously.  CAUTION A caution alerts you that you must be observe strictly when you operating procedure, practicing, configuring, for preventing from damage and destruction of equipment, and loss of data.  NOTICE A notice provides you the information which you must needs while you using AT911N. 3 AT911N User Guide

Chapter1. Caution when using Before you handle and operate your device, please read through and familiar with the contents of this manual. 1. How to use the battery correctly  When you dropped the main body or battery in water, please do not put it on the stove or heater for drying. Just keep it in natural temperature or contact with purchase place.  Please do not take the metal object to approach to the terminal of battery.  If you do not use the battery for a long time after charging, please keep it at room temperature.  According to the life of battery and processing time of its using, the buffering time can be shortened. In this case, please contact your dealer  You have to charging the device with the provided adaptor from factory. 2. Caution when using  User careless or products repair might damage the stored data. Manufacture is not responsible for this damage, so important data should be kept separately.  If you has problem, do not try to repair or disassemble the product arbitrarily, please contact customer service center.  Do not use your where have electromagnetic wave or the risk may occur such as hospital, plane so on.  A high temperature or high humidity environment will causes trouble, Please note that.  Please do not using other sharp object to touch the screen, otherwise it might be get damaged or not working properly.  If smell odors, occurs smoke or noise during use product, immediately disconnect the charger and off the power, then Please contact with customer service center  If you have any other questions during use, please contact the customer service center 4 AT911N User Guide

Chapter 2. Products compositions AT911N, Android OS based device, can support barcode scanner, RFID tag reader, wireless communication modem, camera etc. and can be widely used in a variety of work environments. 1. Package components After opening the product packaging box, check the items listed as below: 1) PDA 2) Standard battery pack for the body 3) Adaptor 4) Sync Cable If there is missing or defective products as below, please contact the customer support center of your place of purchase 1 2 3 4 < In the Packing box > 5 AT911N User Guide

2. Name of each part Receiver Charge LED WLAN/3G LED LCD Touch Screen Reset Key MIC KEY PAD 6 AT911N User Guide

< Front > Ear Jack UHF Power Key Scan Key Side Key GUN < Side view > Scanner Camera Antenna < Front > DC Power Port USB Synchronization/ 7 AT911N User Guide

DC Power Port < Bottom > Chapter3. Basic Functions 1. Power and battery PDA is composed of main battery. The Main battery supplies the power to the system and RAM which can save and conserve the data. Main Battery: 3.7V 2,260mA Lithium - ion Attach the main battery to the back battery compartment of the PDA. Push the batter lever inside so that the battery is firmly attached to the PDA. “Refer to 1.1 Battery attaching and detaching” Connecting adaptor to the PDA adaptor connecting jack, and check if the “Power LED” is Red, and then charging the power completely until it turns into Green.  Note: When the desktop screen shows after starting the system, press the <power> button for a couple of seconds can reduce the recharging time. 1.1 Detaching and Attaching Main Battery  Detaching Battery These images as below, shows the back bottom of the PDA. Slide the battery latch to the right (UNLOCK side), and then lift the main battery out of the compartment along both sides of groove. 8 AT911N User Guide

Battery locking lever  Attaching Battery Put the top part of battery into the upward groove, and then press down the bottom of battery into the battery compartment, slide battery latch to the left (LOCK side) to attach battery firmly 1.2 Charging You have to charge the battery via dedicated adapter, which provided from the factory. “Power LED” is Red while charging or is Green when charged completely. When fully charged, the LED light will be turned off.  Connecting Adapter 1. Plug in the adapter into the 220V socket. 2. Connect the Mini USB jack to the PDA’s “USB connecting jack”. 3. When “Power LED” shows red light, it means that the device is being charged.  Caution: You must to charge the device using dedicated adapter that is provided from the manufacturer, or your device might get damaged. 1.3 Low power mode (Sleep mode) When the system is started and shows the main desktop screen or other programs are running, you can enter into the low power mode (sleep mode) by using the power button. If you want to use the device again, press the power button again and turn on the system 9 AT911N User Guide

 Use low power mode (sleep mode) with Power button Enter low power mode (sleep mode): 1. If the power button is pressed when the device is on, the screen will be turned off and the device will enter the low power mode (sleep mode). Cancel low power mode (sleep mode) 1. If the power button is pressed when the device is off, the screen will be turned on and the device will be turned on.  Use Automatic low power mode(sleep mode) If the user doesn’t use the device for a set period of time, system enters into the low power mode (sleep mode) automatically. You can change the setting time in control panel and power management as shown below. Using proper time-out setting prevents the system is on a long time without the user and extends hours of battery use. [Menu] -> [Settings] -> [Display] -> [Sleep mode] 1.4 Batter replacement If the batteries are damaged or out of its life, buy new batteries to use.  Warning! Discard the dead batteries to the designated place 10 AT911N User Guide

2. System reset (Cold reset) If the system is not responding or application program doesn’t work, restart the system by using reset function. System reset is used to reboot and initialize the hardware completely. The installed programs copied files, and registry values will be preserved even after the system reset [Cold Reset Steps] Push and release the reset button. [Result]  The system will restart.  The operating system will be loaded again when restarting. 11 AT911N User Guide

3. Use Micro SD, SIM, SAM Cards The image below shows the back side of the PDA when the main battery is removed. There are 1 SIM card slot, 1 Micro SD memory card slot as shown below. Micro SD card slot SIM card slot 3.1 Micro SD Card Installation Slide the cover of Micro SD Lift up the top of the slot card slot to the right to cover to open release the lock. Place the SD memory card Slide the cover to the left to into the slot and close the lock the slot. cover 12 AT911N User Guide

When the SD memory is selected from the File Manager after installing Micro SD memory card, it is shown as below. 3.2 Installing SIM card Below is the screenshot after installing the SIM card. Place and insert the SIM card so that it fits the slot shape. 13 AT911N User Guide

4. System settings 4.1 Set Screen Brightness Brightness of the screen affects the power consumption the most, so it is recommended to be set as required by the user. [Setting the screen brightness] 1. [Menu] -> [Settings] -> [Display] -> [Brightness] Brightness: Adjust the screen brightness. Wallpaper: Choose the wallpaper. Auto-rotate screen: Set the Auto-rotate screen function. Sleep mode: Adjust the time period to enter into the sleep mode Font size: Adjust the font size of PDA. 4.2 Set sound volume The volume is set to 80% when it is dispatched. The user can set the different features of sound settings from [Menu] -> [Settings] -> [Sound]. Volumes and sound setting [Menu] -> [Settings] -> [Sound] 14 AT911N User Guide

5. Use keypad Keypad is an input method editor that inputs numbers or alphabetic characters easily. 5.1 Use keypad To change the current input language, follow the steps below. [Menu] -> [Settings] -> [Language & input] 5.2 Keypad button execution Describe the Keypad Function. Keypad Function description < > Menu key < > Home button. < > Contains keyEvent values of KEYCODE_SOFT_RIGHT. < > It is used to move back to previous state. < > It is used for searching 15 AT911N User Guide

Chapter 4. Use Peripheral Device This chapter describes various option modules for use with AT911N.Please refer to description of necessary option modules and use them. Option Module of AT911N AT911N device provides the options as below according to the purpose of use. The Option Modules below are other specifications outside AT911N, so when buying the device, you should confirm it to buy. The types of options provided in AT911N 1) Barcode reader -. 1D Laser Barcode Scanner -. 2D Imager Barcode Scanner 2) Wireless LAN – 801.11 a/ b/g/n 3) Bluetooth 4) UHF 900MHz RFID ISO18000 6C 6) GPS Module 7) Phone 8) Camera 1. 1D and 2D barcode scanner The barcode scanner which can recognize 1D, 2D barcode can be installed on this device. 1.1 Read 1D or 2D barcode 16 AT911N User Guide

[Menu] -> [ATID Scanner] [Correct barcode reading] 1. The small barcode should be closer to the device. This device is read at the distances of 40~300mm. If the reading not working well, please adjust angle or distance. 2. Laser beam appears as a dark red line when shined to barcode label. 1D 2D [Incorrect barcode reading] 1. Laser beam should cross the barcode. 2. If only part of the barcode is shined by the laser beam, it won’t be recognized. 1D 2D 17 AT911N User Guide

2. WLAN connection This device can communicates wireless data by 802.11b/g radio, and describes access pointer and the contents related to wireless communication. AT 911N device supports TCP/IP network protocol and directly use host computer and TCP/IP in TCP/IP network. When shipping goods, wireless LAN is always set to off 2.1 Turn Wi-Fi on / Turn Wi-Fi off [Menu] -> [Applications] -> [Settings] -> [Wi-Fi] 18 AT911N User Guide

3. Bluetooth The below contents are related to “AP6330 COMBO” Module which is used in AT911N. 3.1 Turn on/off Bluetooth [Menu] -> [Applications] -> [Settings] -> [Bluetooth] 1. Start Bluetooth function 19 AT911N User Guide

4. GPS Module The device can be installed with GPS system as option, and GPS Module will be installed on top of AT911N into Built-in shape. 4.1 Start GPS Demo Program [Menu] -> [Applications] -> [GPS Test] GPS Test Start the program. Confirm GPS reception Data: 1. Confirm whether GPS reception is normal in the open place. 2. Actual reception times of GPS Data may be different according to environment (about 3~5 minutes) If the signal is received previously, it can receive the GPS Data quickly. GPS Test Screen. 20 AT911N User Guide

5. Use Camera The products are installed with 5.0 mega pixel cameras and have the functions of screen brightness, resolution adjustment and screen captures 5.1 Use Camera [Menu] -> [Applications] -> [Camera] Start Camera program Camera screen 21 AT911N User Guide

6. Use UHF 6.1 UHF 900Mhz RFID Program [Menu] -> [Applications] -> [Settings] -> [ATUHF Demo] Start ATUHF Demo program ATUHF Demo screen 22 AT911N User Guide

Chapter 5. Appendix Product Specifications Physical Characteristic and Operating Environment Appearance 145mm(L) X 75mm(W) X 23mm(H) Weight Body 335g Operating temperature -20℃ ~ 50℃ Storage temperature -30℃ ~ 60℃ Humidity Non-condensing Drop 1.2m drop to concrete Product Specifications Process ALLWINNER A20 Dual-Core 1.0GHz Operating system Android 4.2 Jelly Bean Memory ROM 8GB / RAM 1GB 4" WVGA TFT LCD 480Wx800L with Backlight Display Capacitive Touch Screen Audio Speaker, Earphone jack, Microphone Communication port USB 2.0 Expansion slot 1 Micro SD slot (supports SDHC), 1 SIM slot Keypad None Notification Speaker, LED Power System Battery Lithium ion 3.7V Above 2,260mAH(rechargeable) Input AC 110~240V Power Adaptor Output DC 5V 2A Network Characteristic Radio GSM/GPRS,WCDMA and HSDPA Wireless LAN WLAN(802.11 a/b/g/n compliant) Antenna Embedded LAN & WAN Data Collection processor Scanner 1D Laser, 2D Imager Scanner Camera 5.0M Pixel UHF 900MHz tag reader Frequency 902MHz - 928Mhz Reading range 0m ~ 7m(According to Tag & Environment) Writing range 0m ~ 3m(According to Tag & Environment) Antenna Gain 1dbi(Standard) Speed 62.5 kbps 23 AT911N User Guide

RF output 1W EIRP Protocol EPC Gen2 ISO 18000 6C, ISO 18000(6B option) Multi reading Anti-collision RF Exposure Information and Statement The SAR limit of USA/Canada (FCC/IC) is 1.6 W/kg averaged over one gram of tissue. Device types WCDMA wireless data terminal (FCC ID: VUJAT911N / IC: 20534-AT911N) has also been tested against this SAR limit. The highest reported SAR values for head, body-worn accessory, wireless router(hotspot) , and simultaneous transmission conditions are 0.445 W/kg, 0.788 W/kg , 0.748 W/kg, and 0.946W/kg respectively. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC WARNING This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: 24 AT911N User Guide

(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 25 AT911N User Guide


Document Created: 2016-05-16 16:29:38
Document Modified: 2016-05-16 16:29:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC