Test Report

FCC ID: VTO0711RG01-1T

Test Report

Download: PDF
FCCID_873726

FCC ID: VTO0711RG01-1T FCC TEST REPORT REPORT NO.: 071114FIA01 MODEL NO.: RG01-1T RECEIVED: Nov. 13, 2007 TESTED: Nov. 13 ~ Nov. 16, 2007 ISSUED: Nov. 20, 2007 APPLICANT: ProCom Electric Appliances (Shanghai) Co., Ltd. ADDRESS: #1118 Huicheng Road, Nanhui Industrial Park, Nanhui 201300, Shanghai ISSUED BY: ADT (Shanghai) Corporation ADDRESS: 2F, Building C, No.1618, Yishan rd., 201103, Shanghai, China This test report consists of 30 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by A2LA or any government agencies. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. This report contains data that were produced under Laboratory ADT (Shanghai) Corporation. ADT (Shanghai) Corporation. V 2.1.0 Report No.: 071114FIA01 1

FCC ID: VTO0711RG01-1T Table of Contents 1 CERTIFICATION......................................................................................................3 2 SUMMARY OF TEST RESULTS .............................................................................4 2.1 MEASUREMENT UNCERTAINTY ..........................................................................4 3 GENERAL INFORMATION ......................................................................................5 3.1 GENERAL DESCRIPTION OF EUT........................................................................5 3.2 DESCRIPTION OF TEST MODES..........................................................................5 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .........................................7 3.4 DESCRIPTION OF SUPPORT UNITS....................................................................7 4 EMISSION TEST .....................................................................................................8 4.1 CONDUCTED EMISSION MEASUREMENT ..........................................................8 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................8 4.1.2 TEST RESULTS ......................................................................................................8 4.2 DEACTIVATION TIME.............................................................................................9 4.2.1 LIMITS OF DEACTIVATION TIME MEASUREMENT .............................................9 4.2.2 TEST INSTRUMENTS ............................................................................................9 4.2.3 TEST PROCEDURES .............................................................................................9 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................9 4.2.5 TEST SETUP ..........................................................................................................9 4.2.6 TEST RESULTS ....................................................................................................10 4.3 RADIATED EMISSION MEASUREMENT .............................................................12 4.3.1 LIMITS OF RADIATED EMISSION MEASUREMENT ..........................................12 4.3.2 TEST INSTRUMENTS ..........................................................................................14 4.3.3 TEST PROCEDURE .............................................................................................15 4.3.4 DEVIATION FROM TEST STANDARD .................................................................15 4.3.5 TEST SETUP ........................................................................................................16 4.3.6 EUT OPERATING CONDITIONS..........................................................................16 4.3.7 TEST RESULTS ....................................................................................................17 4.4 20DB OCCUPIED BANDWIDTH MEASUREMENT..............................................23 4.4.1 LIMITS OF BAND EDGES MEASUREMENT .......................................................23 4.4.2 TEST INSTRUMENTS ..........................................................................................23 4.4.3 TEST PROCEDURES ...........................................................................................24 4.4.4 DEVIATION FROM TEST STANDARD .................................................................24 4.4.5 TEST SETUP ........................................................................................................24 4.4.6 TEST RESULTS ....................................................................................................25 5 PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................26 6 PHOTOGRAPHS OF THE EUT.............................................................................27 7 APPENDIX A - INFORMATION ON THE TESTING LABORATORY......................30 8 APPENDIX B – UNCERTAINTY IN EMC MEASUREMENT..................................31 Report No.: 071114FIA01 2

FCC ID: VTO0711RG01-1T 1 CERTIFICATION PRODUCT: Fireplace Transmitter MODEL NO.: RG01-1T APPLICANT: ProCom Electric Appliances (Shanghai) Co., Ltd. TESTED: Nov. 13 ~ Nov. 16, 2007 TEST ITEM: ENGINEERING SAMPLE STANDARDS: FCC Part 15:2007, Subpart C (Section 15.209 and 15.231), ANSI C63.4-2003 We, ADT (Shanghai) Corporation, declare that the equipment above has been tested in our facility and found compliance with the requirement limits of applicable standards. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. TECHNICAL ACCEPTANCE : , DATE: NOV. 20, 2007 Joy Zhu Engineering Supervisor APPROVED BY : , DATE: NOV. 20, 2007 Wallace Pan Director of Operations Report No.: 071114FIA01 3

FCC ID: VTO0711RG01-1T 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C Standard Test Type Result Remarks Paragraph 15.207 Conducted Emission Test N/A Please refer to 4.1.2. 15.231(a) De-activation Time PASS Meet the requirement of limit 15.209 Minimum passing margin is Radiated Emission Test PASS 15.231(b) –18.04 dB at 1301.76 MHz 20dB Occupied Bandwidth 15.231(c) PASS Meet the requirement of limit Measurement 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. MEASUREMENT FREQUENCY UNCERTAINTY Conducted emissions 9kHz ~ 30MHz 3.04 dB 30MHz ~ 200MHz 4.42 dB (Horizontal) 30MHz ~ 200MHz 4.62 dB (Vertical) Radiated emissions 200MHz ~ 1000MHz 4.06 dB (Horizontal) 200MHz ~ 1000MHz 4.16 dB (Vertical) Note: The measurement uncertainty is factored into the compliance determination. The additional information is listed on APPENDIX B of this report. Report No.: 071114FIA01 4

FCC ID: VTO0711RG01-1T 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Fireplace Transmitter MODEL NO. RG01-1T POWER SUPPLY 4.5Vdc from batteries MODULATION TYPE ASK CARRIER FREQUENCY 434.032 MHz OF EACH CHANNEL NUMBER OF CHANNEL 1 ANTENNA TYPE Printed antenna DATA CABLE SUPPLIED N/A I/O PORTS N/A NOTE: The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. 3.2 DESCRIPTION OF TEST MODES One channel is provided to this EUT: Channel Frequency 1 434.032 MHz Two buttons with remote controller are provided to this EUT: No. Button 1 Switch button 2 Background light control button Report No.: 071114FIA01 5

FCC ID: VTO0711RG01-1T TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL: EUT Applicable to configure Description mode PLC De-a T RE 20dB OBM A - √ √ √ Continuously transmitting Where PLC: Power Line Conducted Emission De-a T: De-activation Time RE: Radiated Emission 20dB OBM: 20dB Occupied Bandwidth Measurement Radiated Emission Test:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, and X.Y.Z. axis. Following channel(s) was (were) selected for the final test as listed below. Available Tested Modulation Axis Channel Channel Type 1 1 ASK X Report No.: 071114FIA01 6

FCC ID: VTO0711RG01-1T 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a remote controller. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C. (15.231) ANSI C63.4- 2003 All test items have been performed and recorded as per the above standards. 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit. EUT (Powered by batteries) Test table Note: When doing the test, fresh batteries were used. Report No.: 071114FIA01 7

FCC ID: VTO0711RG01-1T 4 EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 NOTES: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 4.1.2 TEST RESULTS Since the EUT does not have AC power port, the test item is not applicable. Report No.: 071114FIA01 8

FCC ID: VTO0711RG01-1T 4.2 DEACTIVATION TIME 4.2.1 LIMITS OF DEACTIVATION TIME MEASUREMENT TEST STANDARD: FCC Part 15: 2005, Subpart C (Section: 15.231(a)) A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. 4.2.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until SIGNAL ANALYZER FSP E1S1002 Mar. 16, 2008 Rohde & Schwarz Logarithmic Periodic Antenna LP1 E1A1008 Oct. 20, 2008 Sunol Sciences NOTE: The calibration interval of the above test instruments is 12 months. 4.2.3 TEST PROCEDURES 1 The EUT was placed on the turning table. 2 The signal was coupled to the spectrum analyzer through an antenna. 3 The transmission duration was measured and recorded. 4.2.4 DEVIATION FROM TEST STANDARD No deviation. 4.2.5 TEST SETUP 1 meter SPECTRUM EUT ANALYZER Report No.: 071114FIA01 9

FCC ID: VTO0711RG01-1T 4.2.6 TEST RESULTS Frequency Transmission duration Maximum limit Push button Pass / Fail (MHz) (sec) (sec) 1 434.032 0.99 5 PASS 2 434.032 1 5 PASS Button 1 RBW 10 kHz Delta 2 [T1 ] * VBW 30 kHz 2.00 dB Ref -20 dBm * Att 10 dB SWT 5 s 990.000000 ms -20 Marker 1 [T1 ] -97.58 dBm 807.500000 ms A -30 1 PK * VIEW -40 -50 -60 PRN -70 -80 -90 2 1 -100 -110 -120 Center 434.032 MHz 500 ms/ Date: 15.NOV.2007 08:56:52 Button 2 Report No.: 071114FIA01 10

FCC ID: VTO0711RG01-1T RBW 10 kHz Delta 2 [T1 ] * VBW 30 kHz 0.23 dB Ref -20 dBm * Att 10 dB SWT 5 s 1.000000 s -20 Marker 1 [T1 ] -96.35 dBm 2.437500 s A -30 1 PK * VIEW -40 -50 -60 PRN -70 -80 -90 1 2 -100 -110 -120 Center 434.032 MHz 500 ms/ Date: 15.NOV.2007 08:57:42 Report No.: 071114FIA01 11

FCC ID: VTO0711RG01-1T 4.3 RADIATED EMISSION MEASUREMENT 4.3.1 LIMITS OF RADIATED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15: 2005, Subpart C (Section: 15.205) FCC Part 15: 2005, Subpart C (Section: 15.209) FCC Part 15: 2005, Subpart C (Section: 15.231(b)) According to 15.231 the field strength of emissions from intentional radiators operated under these frequencies bands shall not exceed the following: Fundamental Field Strength of Fundamental Field Strength of Spurious Frequency (MHz) uV/meter dBuV/meter uV/meter dBuV/meter 40.66 – 40.70 2250 67.04 225 48.04 70 – 130 1250 61.94 125 41.94 130 – 174 1250 to 3750 61.94 to 71.48 125 to 375 41.94 to 51.48 174 – 260 3750 71.48 75 37.50 260 – 470 3750 to 12500 71.48 to 81.94 375 to 1250 51.48 to 61.94 Above 470 12500 81.94 1250 61.94 NOTE: (1) Where F is the frequency in MHz, the formula for calculating the maximum permitted fundamental field strengths are as follows: for the band 130-174 MHz, uV/m at 3 meters = 56.81818(F)-6136.3636; for the band 260-470 MHz, uV/m at 3 meters = 41.6667(F)- 7083.3333. The maximum permitted unwanted emission level is 20 dB below the maximum permitted fundamental level. (2) The above field strength limits are specified at a distance of 3meters. The tighter limits apply at the band edges. Report No.: 071114FIA01 12

FCC ID: VTO0711RG01-1T Emissions radiated outside of the specified bands, shall be according to the general radiated limits in 15.209 as following: Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. FREQUENCY RANGE OF RADIATED MEASUREMENT (For intentional radiators) If the intentional radiator operates below 10 GHz: to the tenth harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower. Report No.: 071114FIA01 13

FCC ID: VTO0711RG01-1T 4.3.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER UNTIL Test Receiver ESCS30 E1R1001 Apr. 19, 2008 ROHDE & SCHWARZ BILOG Antenna VULB9168 E1A1001 Sept. 26, 2008 SCHWARZBECK Preamplifier 8447D E1A2001 Jan. 27, 2008 Agilent Preamplifier 8449B E1A2002 Jan. 27, 2008 Agilent Double Ridged Broadband Horn Antenna BBHA 9120D E1A1002 Feb. 15, 2008 Schwarzbeck *Spectrum Analyzer E4403B E1S1001 Jan. 13, 2008 Agilent *Spectrum Analyzer FSP E1S1002 May. 15, 2008 ROHDE & SCHWARZ RF signal cable RG-402 E1CBH01 May. 30, 2008 Woken RF signal cable RG-402 E1CBH16 May. 30, 2008 Woken RF signal cable RG-402 E1CBH20 May. 30, 2008 Woken RF signal cable RG-412 E1CBL02 May. 30, 2008 Woken RF signal cable RG-412 E1CBL03 May. 30, 2008 Woken RF signal cable RG-412 E1CBL04 May. 30, 2008 Woken Software ADT_Radiated_V7.5 N/A N/A ADT NOTE: 1. The calibration interval of the above test instruments is 12 months. 2. “*” = These equipment are used for the final measurement. 3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The Spectrum Analyzer (model: FSP) and RF signal cable (SERIAL: E1CBH05&E1CBH07) are used only for the measurement of emission frequency above 1GHz if tested. Report No.: 071114FIA01 14

FCC ID: VTO0711RG01-1T 4.3.3 TEST PROCEDURE a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth of test receiver/spectrum analyzer is 120kHz for Peak detection (PK) and Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Peak detection (PK) at frequency above 1GHz. 4.3.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: 071114FIA01 15

FCC ID: VTO0711RG01-1T 4.3.5 TEST SETUP For the actual test configuration, please refer to the related Item – Photographs of the Test Configuration. 4.3.6 EUT OPERATING CONDITIONS Set the transmitter part of EUT under transmission condition continuously at specific channel frequency. Report No.: 071114FIA01 16

FCC ID: VTO0711RG01-1T 4.3.7 TEST RESULTS Below 1GHz Worst-Case Data EUT Remote controller MODEL NO. RG01-1T FREQUENCY CHANNEL Channel 1 30 ~ 1000 MHz RANGE MODULATION INPUT POWER ASK 4.5 Vdc from batteries TYPE (SYSTEM) ENVIRONMENTAL 20 deg. C, 50% RH, DETECTOR CONDITIONS 1000 hPa FUNCTION Quasi-Peak / Peak/ Average TESTED BY REBECCA ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Freq. Factor Reading Emission Limit Margin Ant. Height Table Angle No. (MHz) (dB/M) (dBuV/M) (dBuV/M) (dBuV/M) (dB) (cm) (Deg.) 1 233.7QP 14.61 -8.82 5.79 46 -40.21 99 7 2 350.1QP 17.47 -8.48 8.99 46 -37.01 99 19 3* 434.03PK 19.71 34.02 53.73 100.83 -47.1 99 0 3* 434.98AV 19.74 19.45 39.16 80.83 -41.67 99 0 4 602.3QP 23.17 -8.23 14.94 46 -31.06 99 59 5 740.52QP 25.24 -8.97 16.27 46 -29.73 99 208 6 813.27QP 26.11 -8.19 17.91 46 -28.09 99 0 7 868.07PK 26.43 21.37 47.8 80.83 -33.03 99 0 7 868.09AV 26.43 6.8 33.23 60.83 -27.6 99 0 8 941.8QP 27.77 -7.59 20.18 46 -25.82 99 19 Report No.: 071114FIA01 17

FCC ID: VTO0711RG01-1T ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Freq. Factor Reading Emission Limit Margin Ant. Height Table Angle No. (MHz) (dB/M) (dBuV/M) (dBuV/M) (dBuV/M) (dB) (cm) (Deg.) 1 190.05QP 13.44 -9 4.44 43.5 -39.06 100 162 2 323.43QP 17.1 -8.99 8.12 46 -37.88 100 210 3* 434.02PK 19.71 33.46 53.17 100.83 -47.66 101 19 3* 434.04AV 19.71 18.89 38.6 80.83 -42.23 100 19 4 478.62QP 20.56 -8.2 12.36 46 -33.64 100 111 5 583QP 22.78 -8.72 14.07 46 -31.93 100 58 6 711.25QP 24.81 -0.84 23.97 46 -22.03 100 313 7 806QP 25.95 -7.99 17.96 46 -28.04 100 301 8 868.06PK 26.43 13.55 39.98 80.83 -40.85 100 0 8 868.07AV 26.43 -1.02 25.41 60.83 -35.42 100 19 NOTE: 1. Emission level (dBuV/m) =Raw Value (dBuV) + Correction Factor (dB) 2. Correction Factor (dB) = Antenna Factor (dB) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “*” = Fundamental frequency 6. The average value of fundamental frequency and spurious emission is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 40*0.43+1.49ms 20log(Duty cycle) = 20log =-14.56dB 100ms please see page 21~22 for plotted duty Report No.: 071114FIA01 18

FCC ID: VTO0711RG01-1T About 1GHz Worst-Case Data EUT Remote controller MODEL NO. RG01-1T FREQUENCY CHANNEL Channel 1 1 GHz ~ 5 GHz RANGE MODULATION INPUT POWER ASK 4.5 Vdc from batteries TYPE (SYSTEM) ENVIRONMENTAL 20 deg. C, 50% RH, DETECTOR CONDITIONS 1000 hPa FUNCTION Peak/ Average TESTED BY REBECCA ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Freq. Factor Reading Emission Limit Margin Ant. Height Table Angle No. (MHz) (dB/M) (dBuV/M) (dBuV/M) (dBuV/M) (dB) (cm) (Deg.) 1 1301.76PK 29.69 20.84 50.53 74 -23.47 100 67 1 1301.76AV 29.69 6.27 35.96 54 -18.04 100 45 2 1735.68PK 29.33 19.69 49.02 80.83 -31.81 100 345 2 1735.68AV 29.33 5.12 34.45 60.83 -26.38 100 54 3 2169.6PK 32.62 16.41 49.03 80.83 -31.8 100 157 3 2169.6AV 32.62 1.84 34.46 60.83 -26.37 100 129 4 2603.52PK 32.89 16.55 49.43 80.83 -31.4 100 48 4 2603.52AV 32.89 1.98 34.86 60.83 -25.97 100 74 5 3037.44PK 33.65 16.4 50.05 80.83 -30.78 100 38 5 3037.44AV 33.65 1.83 35.48 60.83 -25.35 100 84 6 3471.36PK 33.22 16.1 49.32 80.83 -31.51 100 181 6 3471.36AV 33.22 1.53 34.75 60.83 -26.08 100 25 7 3905.28PK 35.64 14.18 49.82 74 -24.18 100 67 7 3905.28AV 35.64 -0.39 35.25 54 -18.75 100 175 8 4339.2PK 37.37 13.67 51.05 74 -22.95 100 142 8 4339.2AV 37.37 -0.9 36.48 54 -17.52 100 101 Report No.: 071114FIA01 19

FCC ID: VTO0711RG01-1T ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Freq. Factor Reading Emission Limit Margin Ant. Height Table Angle No. (MHz) (dB/M) (dBuV/M) (dBuV/M) (dBuV/M) (dB) (cm) (Deg.) 1 1301.76PK 29.69 19.52 49.22 74 -24.78 100 52 1 1301.76AV 29.69 4.95 34.65 54 -19.35 100 124 2 1735.68PK 29.33 18.37 47.71 80.83 -33.12 100 37 2 1735.68AV 29.33 3.8 33.14 60.83 -27.69 100 65 3 2169.6PK 32.62 17.09 49.71 80.83 -31.12 100 171 3 2169.6AV 32.62 2.52 35.14 60.83 -25.69 100 92 4 2603.52PK 32.89 16.02 48.9 80.83 -31.93 100 146 4 2603.52AV 32.89 1.45 34.33 60.83 -26.5 100 275 5 3037.44PK 33.65 15.4 49.06 80.83 -31.77 100 103 5 3037.44AV 33.65 0.83 34.49 60.83 -26.34 100 31 6 3471.36PK 33.22 16.53 49.75 80.83 -31.08 100 228 6 3471.36AV 33.22 1.96 35.18 60.83 -25.65 100 378 7 3905.28PK 35.64 12.63 48.27 74 -25.73 100 310 7 3905.28AV 35.64 -1.94 33.7 54 -20.3 100 154 8 4339.2PK 37.37 13.94 51.31 74 -22.69 100 99 8 4339.2AV 37.37 -0.63 36.74 54 -17.26 100 21 REMARKS: 1. Emission level (dBuV/m) =Raw Value (dBuV) + Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5.The average value of fundamental frequency and spurious emission is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 40*0.43+1.49ms 20log(Duty cycle) = 20log =-14.56dB 100ms please see page 21~22 for plotted duty Report No.: 071114FIA01 20

FCC ID: VTO0711RG01-1T RBW 100 kHz Delta 2 [T1 ] * VBW 300 kHz 0.24 dB Ref -20 dBm * Att 0 dB SWT 5 ms 430.000000 µs -20 Marker 1 [T1 ] -93.84 dBm * -70.000000 µs A -30 1 PK * VIEW -40 -50 TDF -60 PRN -70 -80 -90 1 2 -100 -110 -120 Center 433.92 MHz 500 µs/ Date: 15.NOV.2007 08:43:38 RBW 100 kHz Delta 2 [T1 ] * VBW 300 kHz 1.74 dB Ref -20 dBm * Att 10 dB SWT 5 ms 1.490000 ms -20 Marker 1 [T1 ] -90.47 dBm -1.060000 ms A -30 SGL 1 PK * CLRWR -40 -50 -60 PRN -70 -80 2 1 -90 -100 -110 -120 Center 434.032 MHz 500 µs/ Date: 15.NOV.2007 09:22:41 Report No.: 071114FIA01 21

FCC ID: VTO0711RG01-1T RBW 100 kHz * VBW 300 kHz Ref -20 dBm * Att 10 dB SWT 100 ms -20 A -30 SGL 1 PK * CLRWR -40 -50 -60 PRN -70 -80 -90 -100 -110 -120 Center 434.032 MHz 10 ms/ Date: 15.NOV.2007 09:24:21 Note: According to the repeated test several times，the graph shows that the 100ms window is the worst 100ms transmission that the device is capable of by calculating. Report No.: 071114FIA01 22

FCC ID: VTO0711RG01-1T 20DB OCCUPIED BANDWIDTH MEASUREMENT 4.3.8 LIMITS OF BAND EDGES MEASUREMENT TEST STANDARD: FCC Part 15: 2005, Subpart C (Section: 15.231(C)) The bandwidth of the emission shall be no wider than 0.25% of the center frequency for device operating above 70 MHz and below 900 MHz. Fundamental Frequency (MHz) Limit of 20 dB Bandwidth(kHz) 434.032 1085.08 4.3.9 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until SIGNAL ANALYZER FSP E1S1002 Mar. 16, 2008 Rohde & Schwarz Logarithmic Periodic Antenna LP1 E1A1008 Oct. 20, 2008 Sunol Sciences NOTE: The calibration interval of the above test instruments is 12 months. Report No.: 071114FIA01 23

FCC ID: VTO0711RG01-1T 4.3.10 TEST PROCEDURES 1. The EUT was placed on the turning table. 2. The signal was coupled to the spectrum analyzer through an antenna. 3. Set the resolution bandwidth to 100kHz and video bandwidth to 300 kHz then select Peak function to scan the channel frequency. 4. The 20dB bandwidth was measured and recorded. 4.3.11 DEVIATION FROM TEST STANDARD No deviation. 4.3.12 TEST SETUP 1 meter SPECTRM EUT ANALYZER Report No.: 071114FIA01 24

FCC ID: VTO0711RG01-1T 4.3.13 TEST RESULTS 20 dB bandwidth Maximum limit Frequency (MHz) Pass / Fail (kHz) (kHz) 434.032 614 1085.08 PASS The plot of test result is attached as below. * RBW 100 kHz Marker 3 [T1 ] * VBW 100 kHz -37.34 dBm Ref -20 dBm Att 10 dB SWT 2.5 ms 434.032000000 MHz -20 Marker 1 [T1 ] -57.46 dBm 434.322000000 MHz A -30 3 Delta 2 [T1 ] 1 PK 0.06 dB VIEW -40 -614.000000000 kHz -50 2 1 -60 PRN -70 -80 -90 -100 -110 -120 Center 434.032 MHz 100 kHz/ Span 1 MHz Date: 28.NOV.2007 12:40:15 Report No.: 071114FIA01 25

FCC ID: VTO0711RG01-1T 5 PHOTOGRAPHS OF THE TEST CONFIGURATION Radiated Emission Report No.: 071114FIA01 26

FCC ID: VTO0711RG01-1T 6 PHOTOGRAPHS OF THE EUT Report No.: 071114FIA01 27

FCC ID: VTO0711RG01-1T Report No.: 071114FIA01 28

y Abr corn

FCC ID: VTO0711RG01-1T 7 APPENDIX A - INFORMATION ON THE TESTING LABORATORY We, ADT (Shanghai) Corp., was founded in 2003 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratory is accredited and approved by the following approval agencies according to ISO / IEC 17025 (2005). The client should not use it to claim product endorsement by CNAS, A2LA, or any government agency. Japan VCCI USA FCC, A2LA Norway DNV China CNAS Copies of accreditation certificates of our laboratory obtained from approval agencies can be downloaded from our web site: www.cnadt.com If you have any comments, please feel free to contact us at the following: ADT (Shanghai) Corporation TEL :86-21-6465-9091 Fax : 86-21-6465-9092 Email: service@adt-sh.com Web Site: www.cnadt.com Report No.: 071114FIA01 30

FCC ID: VTO0711RG01-1T 8 APPENDIX B – UNCERTAINTY IN EMC MEASUREMENT As specified in CISPR 16-4-2, measurement instrumentation uncertainty shall be taken into account when determining compliance or non-compliance with a disturbance limit. A disturbance limit shall be determined in the following manner: If Ulab is less than or equal to Ucispr in table 1, then: ※ Compliance is deemed to occur if no measured disturbance exceeds the disturbance limit; ※ Non-compliance is deemed to occur if any measured disturbance exceeds the disturbance limit. If Ulab is greater than or equal to Ucispr in table 1, then: ※ Compliance is deemed to occur if no measured disturbance, increased by (Ulab -Ucispr), exceeds the disturbance limit; ※ Non-compliance is deemed to occur if any measured disturbance, increased by (Ulab -Ucispr), exceeds the disturbance limit. Table 1 – Values of Ucispr Measurement Ucispr (9kHz – 150kHz) Conducted disturbance (mains port) (150kHz – 30MHz) 4,0 dB 3,6 dB Disturbance power (30MHz – 300MHz) 4,5 dB Radiated disturbance (electric field strength on (30MHz – 1000MHz) 5,2 dB an open area test site or alternative test site) Other Under consideration ADT Shanghai hereby declare the U lab value are as the following: Conducted test performed at SR1 shielded room with Ulab values: +/- 3.04 dB Radiated test performed at SAC Chamber with Ulab values: +/- 4.62 dB Based on the above specification, the Ulab values of our sites are less than Ucispr in table 1 and compliance is deemed to occur if no measured disturbance exceeds the disturbance limit. Report No.: 071114FIA01 31


Document Created: 2007-11-29 14:35:32
Document Modified: 2007-11-29 14:35:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC