test report

FCC ID: VT8-PSENML

Test Report

Download: PDF
FCCID_3056027

TEST REPORT Test report no.: 1-0852/15-01-02-A Testing laboratory Applicant CETECOM ICT Services GmbH Pilz GmbH & Co. KG Untertuerkheimer Strasse 6 – 10 Felix-Wankel-Straße 2 66117 Saarbruecken / Germany 73760 Ostfildern / GERMANY Phone: + 49 681 5 98 - 0 Phone: +49 711 340-90 Fax: + 49 681 5 98 - 9075 Fax: +49 711 340-99691 Internet: http://www.cetecom.com Contact: Jürgen Kitzing e-mail: ict@cetecom.com e-mail: j.kitzing@pilz.de Phone: +49 711 340-9691 Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) Manufacturer The accreditation is valid for the scope of testing ELESTA GmbH procedures as stated in the accreditation certificate with Heuteilstr. 18 the registration number: D-PL-12076-01-00 7310 Bad Ragaz / SWITZERLAND Test standard/s Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency 47 CFR Part 15 devices Spectrum Management and Telecommunications Radio Standards Specification - RSS - 210 Issue 8 Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: RFID Proximity switch Model name: PSEN ml b 2.1, PSEN ml b 1.1, PSEN ml b 2.2 Frequency: 125 kHz Technology tested: RFID Antenna: Integrated antenna Power supply: 24 V DC by external power supply Temperature range: 0°C to +55°C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: cn=Stefan Boes, o=CETECOM ICT cn=Marco Bertolino, o=CETECOM ICT Services GmbH, ou=BOE-111011, Services GmbH, ou=BTL-150828, email=Stefan.Boes@cetecom.com, email=marco.bertolino@cetecom.com, c=DE c=DE p.o. 2016.07.07 11:11:26 +02'00' p.o. 2016.07.07 11:57:07 +02'00' Andreas Luckenbill Stefan Sachs Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC

Test report no.: 1-0852/15-01-02-A 1 Table of contents 1 Table of contents ............................................................................................................................................2 2 General information .......................................................................................................................................3 2.1 Notes and disclaimer ..........................................................................................................................3 2.2 Application details ...............................................................................................................................3 3 Test standard/s ...............................................................................................................................................3 4 Test environment............................................................................................................................................4 5 Test item ..........................................................................................................................................................4 5.1 General description .............................................................................................................................4 5.2 Additional information ........................................................................................................................4 6 Test laboratories sub-contracted .................................................................................................................4 7 Description of the test setup .........................................................................................................................5 7.1 Shielded fully anechoic chamber ......................................................................................................6 7.2 AC conducted ......................................................................................................................................7 8 Summary of measurement results ...............................................................................................................8 8.1 Additional comments ..........................................................................................................................8 9 Measurement results......................................................................................................................................9 9.1 Timing of the transmitter ....................................................................................................................9 9.2 Bandwidth of the modulated carrier ................................................................................................10 9.3 Field strength of the fundamental ...................................................................................................11 9.4 Field strength of the harmonics and spurious ...............................................................................12 9.5 Conducted limits ...............................................................................................................................14 Annex A Document history ..........................................................................................................................17 Annex B Further information........................................................................................................................17 Annex C Observations ..................................................................................................................................17 Annex D Accreditation Certificate ...............................................................................................................18 Page 2 of 18

Test report no.: 1-0852/15-01-02-A 2 General information 2.1 Notes and disclaimer The test results of this test report relate exclusively to the test item specified in this test report. CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CETECOM ICT Services GmbH. The testing service provided by CETECOM ICT Services GmbH has been rendered under the current "General Terms and Conditions for CETECOM ICT Services GmbH". CETECOM ICT Services GmbH will not be liable for any loss or damage resulting from false, inaccurate, inappropriate or incomplete product information provided by the customer. Under no circumstances does the CETECOM ICT Services GmbH test report include any endorsement or warranty regarding the functionality, quality or performance of any other product or service provided. Under no circumstances does the CETECOM ICT Services GmbH test report include or imply any product or service warranties from CETECOM ICT Services GmbH, including, without limitation, any implied warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by CETECOM ICT Services GmbH. All rights and remedies regarding vendor’s products and services for which CETECOM ICT Services GmbH has prepared this test report shall be provided by the party offering such products or services and not by CETECOM ICT Services GmbH. In no case this test report can be considered as a Letter of Approval. This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. This test report replaces test report 1-0852/15-01-02 issued 2016-04-01. 2.2 Application details Date of receipt of order: 2016-03-10 Date of receipt of test item: 2016-03-10 Start of test: 2016-03-11 End of test: 2016-04-01 Person(s) present during the test: -/- 3 Test standard/s Test standard Date Test standard description 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 210 Issue 8 December 2010 Spectrum Management and Telecommunications Radio Updated May 2015 Standards Specification - Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment RSS - Gen Issue 4 November 2014 Spectrum Management and Telecommunications Radio Standards Specifications - General Requirements and Information for the Certification of Radio Apparatus Page 3 of 18

Test report no.: 1-0852/15-01-02-A 4 Test environment Tnom 20 °C during room temperature tests Temperature : Tmax No tests under extreme conditions Tmin No tests under extreme conditions Relative humidity content : 47 % Barometric pressure : not relevant for this kind of testing Vnom 24 V DC by external power supply Power supply : Vmax No tests under extreme conditions Vmin No tests under extreme conditions 5 Test item 5.1 General description Kind of test item : RFID Proximity switch Type identification : PSEN ml b 2.1, PSEN ml b 1.1, PSEN ml b 2.2 S/N serial number : -/- PMN : PSEN ml HMN : -/- HVIN : PSEN ml b 2.1, PSEN ml b 1.1, PSEN ml b 2.2 FVIN : -/- HW hardware status : 107337-06 SW software status : V1.00, 2.1 coding Frequency band : 125 kHz Type of radio transmission : modulated carrier Use of frequency spectrum : Type of modulation : Manchester ASK Number of channels : 1 Antenna : Integrated antenna Power supply : 24 V DC by external power supply Temperature range : 0 °C to +55 °C 5.2 Additional information The content of the following annexes is defined in the QA. It may be that not all of the listed annexes are necessary for this report, thus some values in between may be missing. Test setup- and EUT-photos are included in test report: 1-0852/15-01-01_AnnexA 1-0852/15-01-01_AnnexB 1-0852/15-01-01_AnnexC 6 Test laboratories sub-contracted None Page 4 of 18

Test report no.: 1-0852/15-01-02-A 7 Description of the test setup Typically, the calibrations of the test apparatus are commissioned to and performed by an accredited calibration laboratory. The calibration intervals are determined in accordance with the DIN EN ISO/IEC 17025. In addition to the external calibrations, the laboratory executes comparison measurements with other calibrated test systems or effective verifications. Weekly chamber inspections and range calibrations are performed. Where possible, RF generating and signaling equipment as well as measuring receivers and analyzers are connected to an external high-precision 10 MHz reference (GPS-based or rubidium frequency standard). In order to simplify the identification of the equipment used at some special tests, some items of test equipment and ancillaries can be provided with an identifier or number in the equipment list below (Lab/Item). Agenda: Kind of Calibration k calibration / calibrated EK limited calibration ne not required (k, ev, izw, zw not required) zw cyclical maintenance (external cyclical maintenance) ev periodic self verification izw internal cyclical maintenance Ve long-term stability recognized g blocked for accredited testing vlkI! Attention: extended calibration interval NK! Attention: not calibrated *) next calibration ordered / currently in progress Page 5 of 18

Test report no.: 1-0852/15-01-02-A 7.1 Shielded fully anechoic chamber Measurement distance: loop antenna 3 meter FS = UR + CA + AF (FS-field strength; UR-voltage at the receiver; CA-loss of the signal path; AF-antenna factor) Example calculation: FS [dBµV/m] = 40.0 [dBµV/m] + (-35.8) [dB] + 32.9 [dB/m] = 37.1 [dBµV/m] (71.61 µV/m) Equipment table: Lab / INV. No Kind of Last Next No. Equipment Type Manufacturer Serial No. Item Cetecom Calibration Calibration Calibration DC power supply, 1 6032A HP 2818A03450 300001040 Ve 20.01.2015 20.01.2018 60Vdc, 50A, 1200 W 2 Anechoic chamber FAC 3/5m MWB / TDK 87400/02 300000996 ev -/- -/- 3 Switch / Control Unit 3488A HP * 300000199 ne -/- -/- Active Loop Antenna 4 6502 EMCO/2 8905-2342 300000256 k 24.06.2015 24.06.2017 10 kHz to 30 MHz 4U RF Switch 5 L4491A Agilent Technologies MY50000037 300004509 ne -/- -/- Platform EMI Test Receiver 6 ESR26 R&S 101376 300005063 k 04.09.2015 04.09.2016 9kHz-26,5GHz Page 6 of 18

Test report no.: 1-0852/15-01-02-A 7.2 AC conducted FS = UR + CF + VC (FS-field strength; UR-voltage at the receiver; CR-loss of the cable and filter; VC-correction factor of the ISN) Example calculation: FS [dBµV/m] = 37.62 [dBµV/m] + 9.90 [dB] + 0.23 [dB] = 47.75 [dBµV/m] (244.06 µV/m) Equipment table: Lab / INV. No Kind of Last Next No. Equipment Type Manufacturer Serial No. Item Cetecom Calibration Calibration Calibration Two-line V-Network 1 A (LISN) 9 kHz to 30 ESH3-Z5 R&S 892475/017 300002209 k 17.06.2014 17.06.2016 MHz MXE EMI Receiver 2 A N9038A Agilent Technologies MY51210197 300004405 k 06.03.2015 06.03.2016 20 Hz to 26,5 GHz Spitzenberger & B5981; 3 A software SPS_PHE 1.4f 300000210 ne -/- -/- Spiess 5D1081;B5979 4 A Power supply NGSM 32/10 R&S 192.0810.31 -/- Ne…… -/- -/- Page 7 of 18

Test report no.: 1-0852/15-01-02-A 8 Summary of measurement results No deviations from the technical specifications were ascertained There were deviations from the technical specifications ascertained TC Identifier Description Verdict Date Remark CFR Part 15 RF-Testing Passed 2016-07-07 -/- RSS Gen. Issue 3 Test Temperature Power Source Specification Test Case C NC NA NP Results Conditions Voltages Clause § 15.35 (c) / RSS-GEN Issue Timing of the transmitter (Duty Nominal Nominal -/- 3 cycle correction factor ) Section 4.5 § 2.1049 / Bandwidth of the modulated Nominal Nominal -/- RSS-Gen. carrier § 15.209 / Fieldstrength of fundamental Nominal Nominal -/- RSS-Gen. § 15.209 (a) / Fieldstrength of harmonics Nominal Nominal -/- RSS-Gen. and spurious Co- § 15.109 / Receiver spurious emissions Nominal Nominal located RSS-Gen. receiver § 15.107 / Conducted limits Nominal Nominal -/- § 15.207 Note: C = Compliant; NC = Not Compliant; NA = Not Applicable; NP = Not Performed 8.1 Additional comments Reference documents: None Special test descriptions: None Configuration descriptions: None Page 8 of 18

Test report no.: 1-0852/15-01-02-A 9 Measurement results 9.1 Timing of the transmitter Limits: FCC IC Timing of the transmitter (c) Unless otherwise specified, e.g. Section 15.255(b), when the radiated emission limits are expressed in terms of the average value of the emission, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. The exact method of calculating the average field strength shall be submitted with any application for certification or shall be retained in the measurement data file for equipment subject to notification or verification. Duty cycle of the sample with test mode: 100% In normal use the duty cycle is approximately 100% (declared by the manufacturer). Page 9 of 18

Test report no.: 1-0852/15-01-02-A 9.2 Bandwidth of the modulated carrier Limits: FCC IC Bandwidth of the modulated carrier Measured with the integrated OBW-function of the spectrum analyzer Rohde&Schwarz FSV40 (measurement criteria is the integrated power in %) Result: Occupied Bandwidth (kHz) 99%-bandwidth 10.1 Plots of the measurement Plot 1: 99% – bandwidth Date: 1.APR.2016 09:25:02 Page 10 of 18

Test report no.: 1-0852/15-01-02-A 9.3 Field strength of the fundamental Measurement: Measurement parameter Detector: AVG Resolution bandwidth: 10 kHz Trace-Mode: Max Hold Limits: FCC IC Fundamental Frequency Field strength of Fundamental Measurement distance (MHz) (dBµV/m) (m) 125 kHz 19.2 300 Result: TEST CONDITIONS MAXIMUM POWER (dBµV/m) Frequency 125 kHz 125 kHz Mode at 1 m distance at 300 m distance Tnom Vnom 46 -54 Measurement uncertainty ±3dB Recalculation to a measurement distance of 300m with a correction of 40 dB/decade. Page 11 of 18

Test report no.: 1-0852/15-01-02-A 9.4 Field strength of the harmonics and spurious Measurement: Measurement parameter Detector: Peak / Average / Quasi Peak Sweep time: Auto F < 150 kHz: 200 Hz Resolution bandwidth: 150 kHz > F > 30 MHz: 9 kHz F > 30 MHz: 120 kHz F < 150 kHz: 1 kHz Video bandwidth: 150 kHz > F > 30 MHz: 100 kHz F > 30 MHz: 300 kHz Span: See plot Trace-Mode: Max Hold Limits: FCC IC Field strength of the harmonics and spurious. Frequency (MHz) Field strength (µV/m) Measurement distance (m) 0.009 – 0.490 2400/F(kHz) 300 0.490 – 1.705 24000/F(kHz) 30 1.705 – 30 30 (29.5 dBµV/m) 30 30 – 88 100 (40 dBµV/m) 3 88 – 216 150 (43.5 dBµV/m) 3 216 – 960 200 (46 dBµV/m) 3 Result: EMISSION LIMITATIONS Limit f Amplitude of emission Detector max. allowed Results [MHz] [dBµV/m] [dBµV/m] All detected emissions are more than 10 dB below the limit. Note: The limit was recalculated with 20 dB / decade (Part 15.31) for all radiated spurious emissions 30 MHz to 1 GHz from 3 meter limit to a 10 meter distance. (40dB/decade for emissions < 30MHz) Page 12 of 18

Test report no.: 1-0852/15-01-02-A Plots of the measurements Plot 1: 9 kHz – 30 MHz 130 dBµV/m 120 110 100 90 80 70 60 50 40 30 20 10 9kHz 100k 1M 10M 30MHz Frequency Page 13 of 18

Test report no.: 1-0852/15-01-02-A 9.5 Conducted limits Measurement: Measurement parameter Detector: Peak / Quasi-Peak / Average Sweep time: Auto Resolution bandwidth: 9 kHz Video bandwidth: 50 kHz Span: 30 MHz Trace-Mode: Max Hold Limits: FCC IC Conducted limits Frequency of Emission (MHz) Conducted Limit (dBµV) Quasi-peak Average 0.15 – 0.5 66 to 56 * 56 to 46 * 0.5 – 5 56 46 5 - 30 60 50 *Decreases with the logarithm of the frequency Page 14 of 18

Test report no.: 1-0852/15-01-02-A Plots: Plot 1: phase line Premeasurement Average limit class B Quasi peak limit class B Measurement Average level Quasi peak level Phase line 80.0 70.0 60.0 Amplitude in dBµV 50.0 40.0 30.0 20.0 10.0 0 150.0K 1.0M 10.0M 30.0M Frequency in Hz Project ID: 1-0852/15-01-02 Frequency Quasi peak Margin Limit QP Average Margin Limit AV level quasi peak level average MHz dBµV dB dBµV dBµV dB dBµV 0.146951 17.82 14.41 0.223677 32.71 29.97 62.681 26.07 27.83 53.895 0.295641 31.20 29.16 60.364 24.43 27.41 51.839 0.371335 30.12 28.35 58.471 23.23 26.45 49.676 1.205399 27.55 28.45 56.000 20.73 25.27 46.000 3.341725 27.12 28.88 56.000 20.31 25.69 46.000 3.687669 27.12 28.88 56.000 20.30 25.70 46.000 3.923586 27.02 28.98 56.000 20.31 25.69 46.000 Page 15 of 18

Test report no.: 1-0852/15-01-02-A Plot 2: neutral line Premeasurement Average limit class B Quasi peak limit class B Measurement Average level Quasi peak level Neutral line 80.0 70.0 60.0 Amplitude in dBµV 50.0 40.0 30.0 20.0 10.0 0 150.0K 1.0M 10.0M 30.0M Frequency in Hz Project ID: 1-0852/15-01-02 Frequency Quasi peak Margin Limit QP Average Margin Limit AV level quasi peak level average MHz dBµV dB dBµV dBµV dB dBµV 0.152572 36.23 29.63 65.859 29.46 26.47 55.927 0.298974 31.34 28.93 60.271 24.68 27.07 51.744 0.486744 28.83 27.40 56.223 22.08 24.30 46.379 0.571495 28.38 27.62 56.000 21.69 24.31 46.000 0.998040 27.77 28.23 56.000 20.91 25.09 46.000 1.395500 27.47 28.53 56.000 20.61 25.39 46.000 1.498806 27.40 28.60 56.000 20.57 25.43 46.000 4.293142 27.00 29.00 56.000 20.25 25.75 46.000 Page 16 of 18

Test report no.: 1-0852/15-01-02-A Annex A Document history Version Applied changes Date of release Initial release 2016-04-01 -A Editorial corrections 2016-07-07 Annex B Further information Glossary AVG - Average DUT - Device under test EMC - Electromagnetic Compatibility EN - European Standard EUT - Equipment under test ETSI - European Telecommunications Standard Institute FCC - Federal Communication Commission FCC ID - Company Identifier at FCC HW - Hardware IC - Industry Canada Inv. No. - Inventory number N/A - Not applicable PP - Positive peak QP - Quasi peak S/N - Serial number SW - Software PMN - Product marketing name HMN - Host marketing name HVIN - Hardware version identification number FVIN - Firmware version identification number Annex C Observations No observations except those reported with the single test cases have been made. Page 17 of 18

Test report no.: 1-0852/15-01-02-A Annex D Accreditation Certificate Front side of certificate Back side of certificate Note: The current certificate including annex may be received from CETECOM ICT Services on request. Page 18 of 18


Document Created: 2016-07-07 11:57:07
Document Modified: 2016-07-07 11:57:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC