Test Report

FCC ID: VT8-PITM3

Test Report

Download: PDF
FCCID_2540942

TEST REPORT Test report no.: 1-8548/14-01-02-A Testing laboratory Applicant CETECOM ICT Services GmbH Pilz GmbH & Co. KG Untertuerkheimer Strasse 6 – 10 Felix-Wankel-Straße 2 66117 Saarbruecken / Germany 73760 Ostfildern / GERMANY Phone: + 49 681 5 98 - 0 Phone: +49 711 340-90 Fax: + 49 681 5 98 - 9075 Fax: +49 711 340-99691 Internet: http://www.cetecom.com Contact: Jürgen Kitzing e-mail: ict@cetecom.com e-mail: j.kitzing@pilz.de Phone: +49 711 340-9691 Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) Manufacturer The accreditation is valid for the scope of testing Pilz GmbH & Co. KG procedures as stated in the accreditation certificate with Felix-Wankel-Straße 2 the registration number: D-PL-12076-01-00 73760 Ostfildern / GERMANY Test standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - Gen Issue 4 Spectrum Management and Telecommunications Radio Standards Specification - General Requirements and Information for the Certification of Radio Apparatus For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Operating mode selector Model name: PITm3.x FCC ID: VT8-PITM3 IC: 7482A-PITM3 Frequency: 125 kHz Technology tested: RFID Antenna: Integrated loop antenna Power supply: 24 V DC by external power supply Temperature range: -20°C to +55°C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorised: Test performed: cn=Andreas Luckenbill, o=CETECOM ICT cn=Stefan Boes, o=CETECOM ICT Services GmbH, ou=LUC-111202, Services GmbH, ou=BOE-111011, email=andreas.luckenbill@cetecom.com, email=Stefan.Boes@cetecom.com, c=DE c=DE 2015.01.19 08:44:09 +01'00' 2015.01.19 08:19:19 +01'00' Stefan Bös Andreas Luckenbill Radio Communications & EMC Radio Communications & EMC Page 1 of 19

Test report no.: 1-8548/14-01-02-A 1 Table of contents 1 Table of contents ............................................................................................................................................2 2 General information .......................................................................................................................................3 2.1 Notes and disclaimer ..........................................................................................................................3 2.2 Application details ...............................................................................................................................3 3 Test standard/s ...............................................................................................................................................3 4 Test environment ............................................................................................................................................4 5 Test item ..........................................................................................................................................................4 5.1 Additional information ........................................................................................................................4 6 Test laboratories sub-contracted .................................................................................................................4 7 Description of the test setup .........................................................................................................................5 7.1 Radiated measurements .....................................................................................................................5 7.2 Open area site ......................................................................................................................................6 7.3 AC conducted ......................................................................................................................................7 8 Summary of measurement results ...............................................................................................................8 8.1 Additional comments ..........................................................................................................................9 9 Measurement results....................................................................................................................................10 9.1 Timing of the transmitter ..................................................................................................................10 9.2 Bandwidth of the modulated carrier ................................................................................................11 9.3 Field strength of the fundamental ...................................................................................................12 9.4 Fieldstrength of the harmonics and spurious ................................................................................13 9.5 Conducted limits ...............................................................................................................................16 Annex A Document history ..........................................................................................................................18 Annex B Further information ........................................................................................................................18 Annex C Accreditation Certificate ...............................................................................................................19 Page 2 of 19

Test report no.: 1-8548/14-01-02-A 2 General information 2.1 Notes and disclaimer The test results of this test report relate exclusively to the test item specified in this test report. CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CETECOM ICT Services GmbH. The testing service provided by CETECOM ICT Services GmbH has been rendered under the current "General Terms and Conditions for CETECOM ICT Services GmbH". CETECOM ICT Services GmbH will not be liable for any loss or damage resulting from false, inaccurate, inappropriate or incomplete product information provided by the customer. Under no circumstances does the CETECOM ICT Services GmbH test report include any endorsement or warranty regarding the functionality, quality or performance of any other product or service provided. Under no circumstances does the CETECOM ICT Services GmbH test report include or imply any product or service warranties from CETECOM ICT Services GmbH, including, without limitation, any implied warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by CETECOM ICT Services GmbH. All rights and remedies regarding vendor’s products and services for which CETECOM ICT Services GmbH has prepared this test report shall be provided by the party offering such products or services and not by CETECOM ICT Services GmbH. In no case this test report can be considered as a Letter of Approval. This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. 2.2 Application details Date of receipt of order: 2014-09-22 Date of receipt of test item: 2014-09-25 Start of test: 2014-09-25 End of test: 2014-09-25 Person(s) present during the test: Mr. Blum / Mr. Schuchert (Pilz GmbH & Co. KG) 3 Test standard/s Test standard Date Test standard description 47 CFR Part 15 -/- Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - Gen Issue 4 01.11.2014 Spectrum Management and Telecommunications Radio Standards Specification - General Requirements and Information for the Certification of Radio Apparatus Page 3 of 19

Test report no.: 1-8548/14-01-02-A 4 Test environment Tnom +22 °C during room temperature tests Temperature: Tmax No tests under extreme conditions Tmin No tests under extreme conditions Relative humidity content: 55 % Barometric pressure: not relevant for this kind of testing Vnom 24 V DC by external power supply Power supply: Vmax No tests under extreme conditions Vmin No tests under extreme conditions 5 Test item Kind of test item : Operating mode selector Type identification : PITm3.x S/N serial number : 101999 HW hardware status : -/- SW software status : -/- Frequency band [MHz] : 125 kHz Type of radio transmission : Modulated carrier Use of frequency spectrum : Number of channels : 1 Antenna : Integrated loop antenna Power supply : 24 V DC by external power supply Temperature range : -20°C to +55°C 5.1 Additional information The content of the following annexes is defined in the QA. It may be that not all of the listed annexes are necessary for this report, thus some values in between may be missing. Test setup- and EUT-photos are included in test report: 1-8548/14-01-02_AnnexA 1-8548/14-01-02_AnnexB 1-8548/14-01-02_AnnexD 6 Test laboratories sub-contracted None Page 4 of 19

Test report no.: 1-8548/14-01-02-A 7 Description of the test setup 7.1 Radiated measurements The radiated measurements are performed in vertical and horizontal plane in the frequency range from 9 kHz to 1 GHz in semi-anechoic chambers. The EUT is positioned on a non-conductive support with a height of 0.80 m above a conductive ground plane that covers the whole chamber. The receiving antennas are confirmed with specifications ANSI C63. These antennas can be moved over the height range between 1.0 m and 4.0 m in order to search for maximum field strength emitted from EUT. The measurement distances between EUT and receiving antennas are indicated in the test setups for the various frequency ranges. For each measurement, the EUT is rotated in all three axes until the maximum field strength is received. The wanted and unwanted emissions are received by spectrum analysers where the detector modes and resolution bandwidths over various frequency ranges are set according to requirement ANSI C63. Equipment table: Equipment Type Manufacturer Serial No. INV. No Cetecom EMC32 Software R&S -/- -/- V.| 9.12.05 Switch-Unit 3488A HP Meßtechnik 2719A14505 300000368 DC power supply, 60Vdc, 6032A HP Meßtechnik 2920A04466 300000580 50A, 1200 W EMI Test Receiver ESCI 3 R&S 100083 300003312 Amplifier JS42-00502650-28-5A MITEQ 1084532 300003379 Antenna Tower Model 2175 ETS-LINDGREN 64762 300003745 Positioning Controller Model 2090 ETS-LINDGREN 64672 300003746 Turntable Interface-Box Model 105637 ETS-LINDGREN 44583 300003747 TRILOG Broadband Test- VULB9163 Schwarzbeck 295 300003787 Antenna 30 MHz - 3 GHz Test Receiver ESH2 R&S 871921/095 300002505 Loop Antenna 9 KHz - 30 HFH2-Z2 R&S 872096/61 300001824 MHz EMI Test Receiver 9 kHz - 3 ESPI3 R&S 101713 300004059 GHz incl. Preselector Page 5 of 19

Test report no.: 1-8548/14-01-02-A 7.2 Open area site Equipment table: Equipment Type Manufacturer Serial No. INV. No Cetecom Test Receiver ESH2 R&S 871921/095 300002505 Loop Antenna 9 KHz - 30 HFH2-Z2 R&S 872096/61 300001824 MHz Page 6 of 19

Test report no.: 1-8548/14-01-02-A 7.3 AC conducted Equipment table: Equipment Type Manufacturer Serial No. INV. No Cetecom MXE EMI Receiver 20 Hz N9038A Agilent Technologies MY51210197 300004405 bis 26,5 GHz MPL IEC625 Bus Isolating Transformer Erfi 91350 300001155 Regeltrenntravo Switch / Control Unit 3488A HP Meßtechnik * 300000199 Switch / Control Unit 3488A HP Meßtechnik 2719A15013 300001168 Artificial Mains 9 kHz to 30 ESH3-Z5 R&S 828576/020 300001210 MHz Page 7 of 19

Test report no.: 1-8548/14-01-02-A 8 Summary of measurement results No deviations from the technical specifications were ascertained There were deviations from the technical specifications ascertained TC Identifier Description Verdict Date Remark CFR Part 15 RF-Testing Passed 2015-01-19 -/- RSS-Gen, Issue 4 Test Power Temperature Specification Test Case Source Pass Fail NA NP Results Conditions Clause Voltages § 15.35 (c) / RSS-GEN Timing of the transmitter Nominal Nominal complies Issue 4 (Duty cycle correction factor) Section 4.5 § 2.1049 / Bandwidth of the modulated Nominal Nominal complies RSS-Gen. carrier § 15.209 / Fieldstrength of fundamental Nominal Nominal complies RSS-Gen. § 15.209 (a) / Fieldstrength of harmonics Nominal Nominal complies RSS-Gen. and spurious § 15.109 / Receiver spurious emissions Nominal Nominal -/- RSS-Gen. § 15.107 / Conducted limits Nominal Nominal complies § 15.207 Note: NA = Not Applicable; NP = Not Performed Page 8 of 19

Test report no.: 1-8548/14-01-02-A 8.1 Additional comments Reference documents: None Special test descriptions: None Configuration descriptions: None Page 9 of 19

Test report no.: 1-8548/14-01-02-A 9 Measurement results 9.1 Timing of the transmitter Limits: FCC IC Timing of the transmitter (c) Unless otherwise specified, e.g. Section 15.255(b), when the radiated emission limits are expressed in terms of the average value of the emission, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. The exact method of calculating the average field strength shall be submitted with any application for certification or shall be retained in the measurement data file for equipment subject to notification or verification. Duty cycle of the sample with test mode: 100 % In normal use the duty cycle is approximately 100% (declared by the manufacturer). Result: Passed Page 10 of 19

Test report no.: 1-8548/14-01-02-A 9.2 Bandwidth of the modulated carrier Limits: FCC IC Bandwidth of the modulated carrier Measured with the integrated OBW-function of the spectrum analyser. (measurement criteria is the integrated power in %) Result: Occupied bandwidth (kHz) 20 dB (99%) 5.00 Plots of the measurement Plot 1: 20dB (99%) – bandwidth * RBW 200 Hz Marker 1 [T1 ] VBW 1 kHz -34.01 dBm Ref -20 dBm Att 10 dB SWT 500 ms 123.960000000 kHz -20 OBW 5.000000000 kHz Temp 1 [T1 OBW] -64.66 dBm A -30 1 121.040000000 kHz 1 PK Temp 2 [T1 OBW] MAXH -40 -57.61 dBm 126.040000000 kHz -50 T2 -60 T1 -70 6DB -80 -90 -100 -110 -120 Center 125 kHz 2 kHz/ Span 20 kHz Date: 25.SEP.2014 13:24:30 Page 11 of 19

Test report no.: 1-8548/14-01-02-A 9.3 Field strength of the fundamental Measurement: Measurement parameter Detector: AVG Resolution bandwidth: 10kHz Trace-Mode: Max Hold Limits: FCC IC Fundamental Frequency Field strength of Fundamental Measurement distance (MHz) (dBµV/m) (m) 125 kHz 26 300 Result: TEST CONDITIONS MAXIMUM POWER (dBµV/m) Frequency 125 kHz 125 kHz Mode at 10 m distance at 300 m distance Tnom Vnom 53.5 -6.5 Measurement uncertainty ±3dB Recalculation to a measurement distance of 300m with a correction of 40 dB/decade. Result: Passed Page 12 of 19

Test report no.: 1-8548/14-01-02-A 9.4 Fieldstrength of the harmonics and spurious Measurement: Measurement parameter Detector: Peak / Average / Quasi Peak Sweep time: Auto F < 150 kHz: 200 Hz Resolution bandwidth: 150 kHz > F > 30 MHz: 9 kHz F > 30 MHz: 120 kHz F < 150 kHz: 1 kHz Video bandwidth: 150 kHz > F > 30 MHz: 100 kHz F > 30 MHz: 300 kHz Span: See plot! Trace-Mode: Max hold Limits: FCC IC Field strength of the harmonics and spurious. Frequency (MHz) Field strength (µV/m) Measurement distance (m) 0.009 – 0.490 2400/F(kHz) 300 0.490 – 1.705 24000/F(kHz) 30 1.705 – 30 30 (29.5 dBµV/m) 30 30 – 88 100 (40 dBµV/m) 3 88 – 216 150 (43.5 dBµV/m) 3 216 – 960 200 (46 dBµV/m) 3 Result: EMISSION LIMITATIONS Limit f Amplitude of emission Detector max. allowed Results [MHz] [dBµV/m] [dBµV/m] No peaks detected Result: Passed Note: The limit was recalculated with 20 dB / decade (Part 15.31) for all radiated spurious emissions 30 MHz to 1 GHz from 3 meter limit to a 10 meter distance. (40dB/decade for emissions < 30MHz) Page 13 of 19

Test report no.: 1-8548/14-01-02-A Plots of the measurements Plot 1: 9 kHz – 30 MHz 130 dBµV/m 120 110 100 90 80 70 60 50 - Class - QPeak 40 30 20 10 0 9kHz 100k 1M 10M 30MHz Frequency (MHz) Page 14 of 19

Test report no.: 1-8548/14-01-02-A Plot 2: 30 MHz – 1000 MHz Common Information EUT: PITm3.2p Serial number: 101999 Test description: FCC part 15 Operating condition: tx Operator name: Kraus Comment: DC 24V 80 70 60 50 Level in dBµV/m F CC _ 1 0 m_ B 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 8 0 0 1 ,0 5 G F re q u e n c y in H z Final_Result Frequency QuasiPeak Limit Margin Meas. Bandwidth Height Pol Azimuth Corr. (MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB) (ms) 41.359650 10.84 30.00 19.16 1000.0 120.000 101.0 H 205 14.0 288.006750 22.33 36.00 13.67 1000.0 120.000 101.0 V -25 14.2 877.582950 21.41 36.00 14.59 1000.0 120.000 170.0 V -25 23.8 Page 15 of 19

Test report no.: 1-8548/14-01-02-A 9.5 Conducted limits Measurement: Measurement parameter Detector: Peak / Quasi-Peak / Average Sweep time: Auto Resolution bandwidth: 9 kHz Video bandwidth: 50 kHz Span: 30 MHz Trace-Mode: Max Hold Limits: FCC IC Conducted limits Frequency of Emission (MHz) Conducted Limit (dBµV) Quasi-peak Average 0.15 – 0.5 66 to 56 * 56 to 46 * 0.5 – 5 56 46 5 - 30 60 50 *Decreases with the logarithm of the frequency Result: Passed Page 16 of 19

Test report no.: 1-8548/14-01-02-A Plots: Plot 1: phase line 110 dBµV 100 90 80 - Class B - Peak 70 - Class B - QPeak 60 - Class B - Average 50 40 30 20 10 0 150kHz 1M 10M 30MHz Frequency (MHz) Sub-range 1 Plot 2: neutral line 110 dBµV 100 90 80 - Class B - Peak 70 - Class B - QPeak 60 - Class B - Average 50 40 30 20 10 0 150kHz 1M 10M 30MHz Frequency (MHz) Sub-range 2 Page 17 of 19

Test report no.: 1-8548/14-01-02-A Annex A Document history Version Applied changes Date of release Initial release 2014-10-27 A Update of the RSS-Gen Issue 2015-01-19 Annex B Further information Glossary AVG - Average DUT - Device under test EMC - Electromagnetic Compatibility EN - European Standard EUT - Equipment under test ETSI - European Telecommunications Standard Institute FCC - Federal Communication Commission FCC ID - Company Identifier at FCC HW - Hardware IC - Industry Canada Inv. No. - Inventory number N/A - Not applicable PP - Positive peak QP - Quasi peak S/N - Serial number SW - Software Page 18 of 19

Test report no.: 1-8548/14-01-02-A Annex C Accreditation Certificate Front side of certificate Back side of certificate Note: The current certificate including annex is published on our website (see link below) or may be received from CETECOM ICT Services on request. http://www.cetecom.com/eu/de/cetecom-group/europa/deutschland-saarbruecken/akkreditierungen.html Page 19 of 19


Document Created: 2015-01-19 08:44:10
Document Modified: 2015-01-19 08:44:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC