User manual

FCC ID: VQR-SAF3011

Users Manual

Download: PDF

FCCID_1940465

Please neither burn the phone battery nor use it as Care and maintenance
ordinary rubbish, as this could endanger life and
damage to the environment. Please obey the Your device is a product of superior design and craftsmanship
environmental policy of the local government and and should be treated with care. The suggestions below will help
dispose of and recycle them in time. you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity, and all types of
liquids or moisture can contain minerals that will corrode
If you need to connect your phone to other devices, electronic circuits. If your device does get wet, remove the
please read the user guide carefully to ensure the battery and allow the device to dry completely before replacing
procedure is carried out safety. it.

• Do not use or store the device in dusty, dirty areas. Its moving
parts and electronic components can be damaged.
Keep small parts (e.g. SIM card) out of the reach of
children to prevent batteries from being swallowed • Do not store the device in hot areas. High temperatures can
or causing other dangers. shorten the life of electronic devices, damage batteries, and warp
or melt certain plastics.

• Do not store the device in cold areas. When the device returns
Please back up the important information of phone to its normal temperature, moisture can form inside the device
and be sure to have a second copy in case data is lost and damage electronic circuit boards.
from your phone. • Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.

Make sure the phone is switched on and has service • Do not paint the device. Paint can clog the moving parts and
coverage before inputting the emergency number. prevent proper operation.
SOS Press the call key for your position to be located.
Please don’t end call unless told to do so.
• Use a soft, clean, dry cloth to clean any lenses (such as camera,

Safety & Precaution 24

- Increase the separation between the equipment and receiver. required to reach the network. In general, the closer you are to a
- Connect the equipment into an outlet on a circuit different from wireless base station antenna, the lower the power output.
that to which the receiver is connected. The highest SAR value for the model phone as reported to the
- Consult the dealer or an experienced radio/TV technician for FCC when tested for use at the ear is 0.678W/kg and when
help. worn on the body, as described in this user guide, is
Changes or modifications not expressly approved by the party 0.510W/kg (Body-worn measurements differ among phone
responsible for compliance could void the user‘s authority to models, depending upon available accessories and FCC
operate the equipment. requirements.)
The antenna(s) used for this transmitter must not be co-located While there may be differences between the SAR levels of
or operating in conjunction with any other antenna or various phones and at various positions, they all meet the
transmitter. government requirement.
The FCC has granted an Equipment Authorization for this model
RF Exposure Information (SAR) phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
This mobile phone meets the government’s requirements for model phone is on file with the FCC and can be found under the
exposure to radio waves. Display Grant section of www.fcc.gov/oet/ea/fccid after
This phone is designed and manufactured not to exceed the searching on FCC ID:
emission limits of exposure to radio frequency (RF) energy set VQR-SAF3011
by the Federal Communications Commission of the U.S. For body worn operation, this phone has been tested and meets
Government. the FCC RF exposure guidelines for use with an accessory that
The exposure standard for wireless mobile phones employs a contains no metal and the positions the handset a minimum of
unit of measurement known as the Specific Absorption Rate, or 1.5 cm from the body. Use of other accessories may not ensure
SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for compliance with FCC RF exposure guidelines. If you do not use
SAR are conducted using standard operating positions accepted a body-worn accessory and are not holding the phone at the ear,
by the FCC with the phone transmitting at its highest certified position the handset a minimum of 1.5 cm from your body when
power level in all tested frequency bands. Although the SAR is the phone is switched on.
determined at the highest certified power level, the actual SAR Please make sure the temperature for production unit will be
level of the phone while operating can be well below the between -10~50 ˚C.
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the poser This device complies with the FCC HAC requirements has also
been tested E-Field, H-Field and T-Coil, the worst test result of

Safety & Precaution 27

Document Created: 2013-04-01 09:56:00
Document Modified: 2013-04-01 09:56:00

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC