FCC Test Report_DTS

FCC ID: VPYLB1AD

Test Report

Download: PDF
FCCID_3117952

Test report No. : 11354882H—A Page : 1 of 12 Issued date : August 17, 2016 FCC ID : VPYLBIAD RADIO TEST REPORT Test Report No. : 11354882H—A Applicant Murata Manufacturing Co., Ltd. Type of Equipment Communication Module Model No. TypelAD FCC ID VPYLBIAD Test regulation FCC Part 15 Subpart C: 2016 (Class II permissive change) *Maximum Peak Output Power Test only Test Result Complied This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. m p o y po The results in this report apply only to the sample tested. This sample tested is in compliance with the above regulation. The test results in this report are traceable to the national or international standards. This test report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. This test report covers Radio technical requirements. It does not cover administrative issues J such as Manual or non—Radio test related Requirements. (if applicable) Date of test: July 11, 2016 Representative test engineer: Ken Fespbte Ken Fujit#" Engineer Consumer Technology Division Approved by: Fakayuki Shimada Engineer Consumer Technology Division This laboratory is accredited by the NVLAP LAB CODE mviA ® 200572—0, U.S.A. The tests reported herein have been performed in accordance with its terms of accreditation. *As for the range of Accreditation in NVLAP, you may refer to the WEB address, http://japan.ul.com/resources/eme_accredited/ TESTING NVLAP LAB CODE: 200572—0 UL Japan, Inc. Ise EMC Lab. 4383—326 Asama—cho, Ise—shi, Mic—ken 516—0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 13—EM—FO429

Test report No. : 11354882H-A Page : 2 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD REVISION HISTORY Original Test Report No.: 11354882H-A Revision Test report No. Date Page Contents revised - 11354882H-A August 17, - - (Original) 2016 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 11354882H-A Page : 3 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD CONTENTS PAGE SECTION 1: Customer information.......................................................................................................4 SECTION 2: Equipment under test (E.U.T.) .........................................................................................4 SECTION 3: Test specification, procedures & results..........................................................................5 SECTION 4: Operation of E.U.T. during testing ..................................................................................7 SECTION 5: Antenna Terminal Conducted Tests ................................................................................9 APPENDIX 1: Test data ........................................................................................................................10 Maximum Peak Output Power .......................................................................................................... 10 Average Output Power ...................................................................................................................... 11 APPENDIX 2: Test instruments ...........................................................................................................12 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 11354882H-A Page : 4 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD SECTION 1: Customer information Company Name : Murata Manufacturing Co., Ltd. Address : 10-1, Higashikotari 1-chome, Nagaokakyo-shi, Kyoto 617-8555 Japan Telephone Number : +81-75-955-6736 Facsimile Number : +81-75-955-6634 Contact Person : Motoo Hayashi SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Communication Module Model No. : Type1AD Serial No. : Refer to Section 4, Clause 4.2 Rating : DC 3.3V Receipt Date of Sample : July 5, 2016 Country of Mass-production : Japan, China Condition of EUT : Engineering prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product Description General Specification Clock frequency(ies) in the system : 37.4MHz Specification of WLAN (IEEE802.11b/g/n) Type of radio Wireless LAN (IEEE802.11b/g) Wireless LAN (IEEE802.11n) 2.4G Band SISO (20M Band) Equipment Type Transceiver Frequency of Operation 2412MHz - 2462MHz Bandwidth & Channel spacing Bandwidth : 20MHz Ch spacing : 5MHz Type of Modulation 11b: DSSS OFDM 11g: OFDM Antenna Type / Antenna Gain Monopole Antenna: -1.8dBi Power Supply (inner) DC 3.3V Operating temperature range -20 to +70 deg. C <Contents of the change from original model> Test Report Number of original model is 10602907H-A (issued by UL Japan, Inc.). Specification was changed from the original model as follows: *Low power setting value of IEEE802.11b was added. The radio specification is identical to the original. Therefore only Maximum Peak Output Power Test was performed in this report. UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 11354882H-A Page : 5 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part 15 Subpart C FCC part 15 final revised on April 6, 2016. Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.207 Conducted limits Section 15.247 Operation within the bands 902-928MHz, 2400-2483.5MHz, and 5725-5850MHz 3.2 Procedures and results Item Test Procedure Specification Worst margin Results Remarks FCC: KDB 558074 D01 DTS Meas FCC: Section Maximum Peak Guidance v03r05 15.247(b)(3) See data Complied Conducted Output Power IC: RSS-Gen 6.12 IC: RSS-247 5.4(4) Note: UL Japan, Inc.’s EMI Work Procedures No. 13-EM-W0420 and 13-EM-W0422. * In case any questions arise about test procedure, ANSI C63.10: 2013 is also referred. FCC Part 15.31 (e) The EUT has the power supply regulator. However one of the input voltages to RF part doesn’t go through the regulator. The stable voltage will be supplied by the end product, which will be required to have a power supply regulator. Therefore, the EUT complies with the requirement. FCC Part 15.203 Antenna requirement It is impossible for end users to replace the antenna, because it is soldered on the circuit board. Therefore, the equipment complies with the antenna requirement of Section 15.203/212. 3.3 Addition to standard Item Test Procedure Specification Worst margin Results Remarks 99% Occupied IC: RSS-Gen 6.6 IC: - N/A - Conducted Bandwidth Other than above, no addition, exclusion nor deviation has been made from the standard. 3.4 Uncertainty EMI The following uncertainties have been calculated to provide a confidence level of 95 % using a coverage factor k = 2. Ise EM C Lab. Antenna terminal test Uncertainty (+/-) Power meter Conducted emission and Power density Conducted emission Below Above Below 1 GHz 3 GHz 18 GHz 26.5 GHz Channel power 1 GHz 1 GHz 1 GHz -3 GHz -18 GHz -26.5 GHz -40 GHz 0.9 dB 1.0 dB 1.4 dB 1.7 dB 2.8 dB 2.8 dB 2.9 dB 2.6 dB UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 11354882H-A Page : 6 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD 3.5 Test Location UL Japan, Inc. Ise EMC Lab. *NVLAP Lab. code: 200572-0 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999, Facsimile: +81 596 24 8124 Maximum IC Registration Width x Depth x Size of reference ground plane (m) Test site Other rooms measuremen Number Height (m) / horizontal conducting plane t distance No.1 semi-anechoic No.1 Power 2973C-1 19.2 x 11.2 x 7.7 7.0 x 6.0 10 m chamber source room No.2 semi-anechoic 2973C-2 7.5 x 5.8 x 5.2 4.0 x 4.0 - 3m chamber No.3 semi-anechoic No.3 Preparation 2973C-3 12.0 x 8.5 x 5.9 6.8 x 5.75 3m chamber room No.3 shielded room - 4.0 x 6.0 x 2.7 N/A - - No.4 semi-anechoic No.4 Preparation 2973C-4 12.0 x 8.5 x 5.9 6.8 x 5.75 3m chamber room No.4 shielded room - 4.0 x 6.0 x 2.7 N/A - - No.5 semi-anechoic - 6.0 x 6.0 x 3.9 6.0 x 6.0 - - chamber No.6 shielded room - 4.0 x 4.5 x 2.7 4.0 x 4.5 - - No.6 measurement - 4.75 x 5.4 x 3.0 4.75 x 4.15 - - room No.7 shielded room - 4.7 x 7.5 x 2.7 4.7 x 7.5 - - No.8 measurement - 3.1 x 5.0 x 2.7 N/A - - room No.9 measurement - 8.8 x 4.6 x 2.8 2.4 x 2.4 - - room No.11 measurement - 6.2 x 4.7 x 3.0 4.8 x 4.6 - - room 3.6 Test data, Test instruments, and Test set up Refer to APPENDIX. UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 11354882H-A Page : 7 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD SECTION 4: Operation of E.U.T. during testing 4.1 Operating Mode(s) Test operating mode was determined as follows according to “Section 1 of 6 802.11 a/b/g/n testing - Managing Complex Regulatory Approvals - ” of TCB Council Workshop October 2009. Mode Remarks* IEEE 802.11b (11b) 11Mbps, PN9 *The worst condition was determined based on the test result of Maximum Peak Output Power (Mid Channel) *Power of the EUT was set by the software as follows; Power settings: 11b: 13dBm Software: version 5.90.230.2 *This setting of software is the worst case. Any conditions under the normal use do not exceed the condition of setting. *The details of Operating mode(s) Test Item Operating Mode Tested frequency Maximum Peak Output Power, 11b Tx 2412MHz 2437MHz 2462MHz UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 11354882H-A Page : 8 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD 4.2 Configuration and peripherals A 1 B 2 DC 3.3V 3 C 4 5 D AC 100V/60Hz * Cabling and setup(s) were taken into consideration and test data was taken under worse case conditions. Description of EUT No. Item Model number Serial number Manufacturer Remarks 1 Murata Manufacturing Co., A Communication Module Type1AD EUT Ltd. - Murata Manufacturing Co., B Jig - - Ltd. C Laptop PC FMV-C8230 R7305017 FUJITSU - D AC Adapter FMV-AC312 CA1007-0930 FUJITSU - List of cables used No. Name Length (m) Shield Remarks Cable Connector 1 Flat Cable 0.1 Unshielded Unshielded - 2 DC Cable 3.0 Unshielded Unshielded - 3 USB Cable 2.0 Shielded Shielded - 4 DC Cable 1.8 Unshielded Unshielded - 5 AC Cable 2.0 Unshielded Unshielded - UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 11354882H-A Page : 9 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD SECTION 5: Antenna Terminal Conducted Tests Test Procedure The tests were made with below setting connected to the antenna port. Test Span RBW VBW Sweep Detector Trace Instrument used time Maximum Peak - - - Auto Peak/ - Power Meter Output Power Average *1) (Sensor: 50 MHz BW) *1) Reference data The test results and limit are rounded off to two decimals place, so some differences might be observed. Test data : APPENDIX Test result : Pass UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 11354882H-A Page : 10 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD APPENDIX 1: Test data Maximum Peak Output Power Test place Ise EMC Lab. No.3 Measurement Room Report No. 11354882H Date 07/11/2016 Temperature/ Humidity 23 deg. C / 40% RH Engineer Ken Fujita Mode 11b Tx Freq. Reading Cable Atten. Result Limit Margin Loss [MHz] [dBm] [dB] [dB] [dBm] [mW] [dBm] [mW] [dB] 2412 5.63 1.77 10.03 17.43 55.32 30.00 1000 12.57 2437 5.99 1.78 10.03 17.80 60.19 30.00 1000 12.20 2462 5.72 1.79 10.03 17.53 56.64 30.00 1000 12.47 Sample Calculation: Result = Reading + Cable Loss (including the cable(s) customer supplied) + Attenuator 2437MHz Rate Reading Remark [Mbps] [dBm] 1 8.42 2 8.73 5.5 8.63 11 9.02 * *: Worst Rate All comparizon were carried out on same frequency and measurement factors. UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 11354882H-A Page : 11 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD Average Output Power Test place Ise EMC Lab. No.3 Measurement Room Report No. 11354882H Date 07/11/2016 Temperature/ Humidity 23 deg. C / 40% RH Engineer Ken Fujita Mode 11b Tx [AV] 11b 11Mbps Freq. Reading Cable Atten. Result Limit Margin Loss [MHz] [dBm] [dB] [dB] [dBm] [mW] [dBm] [mW] [dB] 2412 1.83 1.77 10.03 13.63 23.06 30.00 1000 16.37 2437 1.96 1.78 10.03 13.77 23.80 30.00 1000 16.23 2462 1.97 1.79 10.03 13.78 23.89 30.00 1000 16.22 Sample Calculation: Result = Reading + Cable Loss (including the cable(s) customer supplied) + Attenuator UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 11354882H-A Page : 12 of 12 Issued date : August 17, 2016 FCC ID : VPYLB1AD APPENDIX 2: Test instruments Test equipment Control No. Instrument Manufacturer Model No Serial No Test Item Calibration Date * Interval(month) MOS-19 Thermo-Hygrometer Custom CTH-201 0001 AT 2015/12/08 * 12 MSA-15 Spectrum Analyzer Agilent E4440A MY46187105 AT 2015/11/11 * 12 MPM-12 Power Meter Anritsu ML2495A 0825002 AT 2016/06/06 * 12 MPSE-17 Power sensor Anritsu MA2411B 0738285 AT 2016/06/06 * 12 MTW-09 Torque wrench HUBER+SUHNER 74 Z-0-0-21 72676 AT 2015/03/05 * 36 MAT-22 Attenuator(10dB) Orient Microwave BX10-0476-00 - AT 2016/03/18 * 12 1-18GHz MCC-138 Microwave cable HUBER+SUHNER SUCOFLEX 102 37953/2 AT 2015/10/08 * 12 MMM-10 DIGITAL HiTESTER Hioki 3805 051201148 AT 2016/01/18 * 12 The expiration date of the calibration is the end of the expired month. All equipment is calibrated with valid calibrations. Each measurement data is traceable to the national or international standards. As for some calibrations performed after the tested dates, those test equipment have been controlled by means of an unbroken chains of calibrations. Test Item: AT: Antenna Terminal Conducted test End of Report UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124


Document Created: 2016-08-23 09:18:35
Document Modified: 2016-08-23 09:18:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC