user manual

FCC ID: VO8HT1

Users Manual

Download: PDF
FCCID_2397719

User Manual Bluetooth Headset Brand name：Bluedio Model name：HT1 FCC ID:VO8HT1 Read this user manual carefully and completely before using the product. Important safety information • Do not listen at high volume levels for long periods of time to prevent hearing damage. • Do not use the product if there is any potential danger. • Do not turn the volume too high to hear sounds around you, turn down the volume if you feel a tinnitus or the volume is too high. • Do not use the product in an environment that requires your special attention(e.g. in traffic). • Keep the product, accessories and packaging parts out of reach of children, to prevent accidents and choking hazards. • Always keep the product dry to avoid corrosion . • Do not use the product if you feel obvious discomfort, irritation or have other adverse reactions. • Do not expose the product to extreme temperatures below -15℃ (5℉) or above 55℃ (131℉) , to maintain the lifespan of headset or battery. Delivery includes H Bluetooth headset 1pc USB charging cable 1pc Audio cable 1pc User manual 1pc Charging and battery Only use charging cable supplied by Bluedio, or may cause damage to the headset. Warning The DC voltage should be 5V and current should exceed 400mA. Charging The headset built-in battery is rechargeable and non-detachable. Do not replace the battery. 1. Switch off the headset before charging. 2. Connect the smaller plug of the charging cable to the USB socket of the headset; connect the other plug to the USB socket of your computer or other charging device; the LED lights up red and the headset is being charged. 3. When the headset is fully charged(about 1.5~2hrs), the LED lights up blue or LED

goes out. Pairing mode Keep the MF button pressed until the LED lights up blue. Reconnection mode Keep the MF button pressed until the LED flashes blue. Switching the headset off Keep the MF Button pressed until the LED flashes blue then goes off. Pairing the headset with your mobile phone 1. Keep the distance between the headset and your mobile phone ( or other Bluetooth device) within 1 meter. The closer, the better. 2. Keep the MF button pressed until the LED lights up blue. the headset is in pairing mode. 3. Switch on the Bluetooth function of your mobile phone, on which start a search for Bluetooth devices. 4. From the found Bluetooth devices, select “H” to establish a Bluetooth connection to the headset. If necessary, enter thedefault PIN code “0000”. 5. Once the headset is paired with the mobile phone, the LED flashes blue. Attention: If pairing is not successful within 60 seconds, the LED goes off and the Bluetooth pairing ends. Repeat the pairing procedure. Disconnecting the headset with your mobile phone 1. Switch the headset off. 2. Or switch off the Bluetooth function of your mobile phone. 3. Or take the headset from your mobile phone 10m away or even farther. Reconnecting the paired headset to your mobile phone 1. Keep the distance between the headset and your mobile phone( or other Bluetooth device) within 1 meter. The closer, the better. 2. Keep the MF button pressed until the LED flashes blue. The headset is in reconnection mode. 3. Switch on the Bluetooth function of your mobile phone. The headset will automatically reconnect to it. Answering a call When there comes a call, the LED flashes blue; press the MF button once, or use your mobile phone to answer it. Ending a call Press the MF button once. Or use your mobile phone to end it.

Rejecting a call After hearing a beep, keep the MF button pressed for around 2 seconds or use your mobile phone to reject it. Call waiting (need your mobile phone to support) When you are on call 1, there comes call 2; to answer call 2 and keep call 1: keep the MF button pressed for around 2 seconds. When call 2 ends, to switch back to call 1: keep the MF button pressed for around 2 seconds Redialing the last call Press the MF button twice. Voice dialing(need to be supported by your mobile phone) Keep the MF button pressed for around 2 seconds. Voice prompt selection Switch the headset on, press the MF button and Vol- button once at the same time to select English/Chinese/French/Spanish. Muting When you are on call, keep the Vol- button pressed to mute the Microphone; keep the Vol+ button pressed to cancel the muting. Audio sharing Connect the headset with your mobile phone via Bluetooth , then connect the headset to another headphone via audio cable. Being a Bluetooth receiver Connect the headset with your mobile phone via Bluetooth , then connect the headset to amplifier via audio cable. Line-in connection connect the headset with your mobile phone via audio cable.(in this mode, the headset cannot be used for communication) EQ adjustment(only in Bluetooth mode) When the headset is playing music, press the Vol+ button and Vol- button once at the same time. Track play/pause Pause the track: press the Wheel switch once Resume the track: press the Wheel switch once again.

Track selection/ Volume adjustment Skip to the next track: push the Wheel switch down Skip to the previous track: push the Wheel switch up Turn the volume up: press the Vol(+) button once(to the maximum, there is a beep) Turn the volume down: press the Vol(-) button once(to the minimum, there is a beep) Technical specifications: Driver units: 2 speakers(57mm) Transducer type: dynamic Bluetooth version: V4.1 Frequency response: 2.402GHz-2.480GHz Operating distance: up to 10m (free space) Profiles: A2DP, AVRCP, HSP, HFP Speaker impendence: 16Ω Frequency response: 20-20KHz Sensitivity: 110dB THD: <0.1％ Music time: about 40hrs Talk time: about 45hrs Standby time: about 1625hrs(around 50days) Fully charged time: about 2hrs Operating environment: -10 to 50℃ Technical specifications are subject to change without notice, we apologize for any inconvenience. FAQ 1.Headset cannot be paired to your mobile phone. Solution: Check if your mobile phone supports the HS or HF profile. Check if the Bluetooth search function of your phone is switched on. Check if your mobile phone is switched off. Check if the distance between the headset and your phone exceeds 10m. 2.Headset cannot be switched on. Solution: The battery is flat. Recharge the battery. 3.Can the battery be replaced? Answer: The battery is non-detachable and cannot be replaced. 4.Can the headset be used while driving? Answer: Do not use the headset in an environment that requires your special attention. If necessary, use it for communication. 5.Bluetooth connection is suddenly interrupted within 10 meter. Solution: Check if there is metal or other material interfering with the transmission. 6. No audio signal Solution: Check if the headset is switched off. Check if the headset is paired. If necessary, pair the headset with the audio source again. Check the connection to your audio source. The volume is adjusted too low, increase the volume.

7.Can the headset be used to control the APPs on your mobile phone. Answer: Software settings of APPs may be varied , thus some APPs may not controlled by the headset. 8. The headset cannot be recharged. Solution: Check the connection of USB plugs. If necessary, remove the USB cable and reconnect again. Switch the headset on then turn it off. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.


Document Created: 2014-09-22 09:29:46
Document Modified: 2014-09-22 09:29:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC