User_Manual

FCC ID: VLJC100-LX-HS

Users Manual

Download: PDF
FCCID_2257056

This user guide provides you with all the information you need to 1. Getting started Connecting the base Welcome... get the most from your phone. IMPORTANT 1. Plug the telephone line cord into the socket marked underside of the base. on the To set up your phone, follow the simple instructions in ‘Getting Do not place your C100xLX in the bathroom or other humid locations. 2. Plug the power adapter into the socket marked on the underside to your new Motorola C100xLX Digital Cordless Telephone! Started’, on the next few pages. Location of the base and plug the other end into the electrical outlet wall You will need to place your C100xLX base within 4.9 feet of the electrical Digital Cordless Telephone • All handsets are completely cordless and easy to locate with paging system. outlet. Switch on the electrical outlet. outlet and telephone wall outlet so that the cables will reach. The socket- • Bright backlit display. IMPORTANT outlet should be installed near the equipment and should be easily Installing and charging the handset accessible. 1. Remove the battery cover from the back of the handset and insert • Speakerphone for hands-free conversations. the rechargeable Ni-MH battery pack supplied. Please note the ’+’ Only use the telephone line cord supplied. Make sure that it is at least 3 feet away from other electrical appliances • 50 Name and Number phonebook. to avoid interference. Your C100xLX works by sending radio signals and ’-’ markings inside the battery compartment and insert in the between the handset and base. The strength of the signal depends on correct direction. • Caller ID shows you who’s calling and shows the details of the last 20 Got everything? where the base is placed. Placing the base at a higher location ensures callers in a Calls list.1 2. Slide the battery cover back into place. a better signal. 3. If you are charging the battery for the first time, place the handset • Redial up to 10 of the last numbers called. When the handset is fully charged, f icon will appear steady • C100xLX base & cordless handset HANDSET RANGE on the base to charge for at least 24 hours continuously. • Register up to 4 handsets to a single base. The unit has a range of up to 650 feet outdoors when there is a clear 4. line of sight between the base and handset. Any obstruction between on the display. Plug the other end of the telephone line cord • Make internal calls and transfer external calls between handsets. • 1 x rechargeable Ni-MH battery pack the base and handset will reduce the range significantly. With the (make sure that one end is already plugged into the base) into the base indoors and the handset either indoors or outdoors, the range will telephone wall outlet. • Choose from 10 different ringtones. normally be up to 98 feet. Thick concrete and stone walls can severely • Power adapter for the base Please note that this equipment is not designed for making affect the range. Connecting the handset and charger (for multi-pack emergency telephone calls when the power fails. Alternative • Telephone line cord SIGNAL STRENGTH only) arrangements should be made for access to emergency services. The icon on your handset indicates that you are within range of the If you have purchased a multiple pack, you will need to carry out this base. When out of range of the base, the icon disappears. If you are process for all the handsets and chargers. Manufactured, distributed or sold by Binatone Technologies Ltd., official If you have purchased a C100xLX multiple pack you will also have licensee for this product. MOTOROLA and the Stylized M Logo are Need help? the following items: on a call, you will hear a warning beep. The line will hang up if the handset moves out of range of the base. Move 1. Plug the power adapter into the socket marked on the underside of trademarks or registered trademarks of Motorola Trademark Holdings, If you have any problems setting up or using your C100xLX, please the charger and plug the other end into the electrical outlet wall socket. LLC. and are used under license. All other trademarks are the property closer to the base. The handset will automatically reconnect to the base. contact Customer Service at 1-888-331-3383. Motorola C100xLX of their respective owners. © 2014 Motorola Mobility LLC. All rights • Cordless handset & charger Setting up 2. Remove the battery cover from the back of the handset and insert For C1001LX, C1002LX, C1003LX and C1004LX reserved. Alternatively, you may find the answer in the ‘Help’ section at the the AAA 2.4v 300mAh Ni-MH rechargeable battery supplied. Please IMPORTANT Version 7 (EN-US) back of this guide. • 1 x rechargeable Ni-MH battery pack The base station must be plugged into the electrical outlet at all times. note the ’+’ and ’-’ markings inside the battery compartment and Do not connect the telephone line cord into the wall outlet until the insert in the correct direction. 1You must subscribe to your network provider’s Caller ID or Call Note: Charge the handset for 24 hours before handset is fully charged. Use only the power adapter and telephone line 3. Slide the battery cover back into place. Waiting service for these features to work. A subscription fee may • Power adapter for the charger initial use. be applicable. cord supplied with the product. 4. If you are charging the battery for the first time, place the handset on the charger to charge for at least 24 hours continuously. 5. When the handset is fully charged,f icon will appear steady on Date and time Overview of your handset Handset LCD Display Navigating the menus 3. Using the phone the display. The display will show HANDSET, the handset number, If you have subscribed to a Caller ID Service and the Auto Clock is set to Each menu has a list of options, which can be seen in detail on the menu NOTE date and the time to indicate that it is registered to the base. on, the date and time will automatically for all handsets when you receive map on the below list. Your handset will automatically time the duration of all external calls. IMPORTANT your first call. Phonebook / Scroll Up / Call list / Scroll Down / When the handset is switched on and in standby mode: The call timer will display after the first 10 seconds of your call. When the m Volume down Display Volume down Warning! Use only the approved rechargeable Ni-MH battery pack If you do not have a Caller ID service, you can set the date and time Open the phonebook. Earpiece Press to enter the Calls list. 1. Press to open the main menu. call ends, the total duration of your talk time is shown for 3 seconds. (AAA 2.4v 300mAh Ni-MH rechargeable battery) supplied with your manually, see section “5.3. Date and Time”. Scroll up through lists and Scroll down through lists Press and hold e to switch the handset on or off. and settings. 2. Then use u or d buttons to scroll through the available options. 3.1   Switch the handset on / off m to select an option. To return to the previous menu level, menus. C100xLX. press b. To exit the menu and return to standby, press e. Your C100xLX is now ready for use. Increase the earpiece volume. During a call, press to 3. Press If E icon flashes on the display and you hear a warning beep every 2 decrease earpiece volume. BATTERY LOW WARNING 2. Getting to know your phone Menu / OK When the phone is ringing, press to decrease the 3.2  Calls 1. Press t. minutes during a call, you will need to recharge the handset before you Underside of your base Enter the main menu. handset ringer volume. NOTE 3.2.1   Make a call Indicates signal strength. When charging, f icon will scroll on the display. Select the option can resume use. displayed on screen. Clear / Back Flashes when the handset is not registered to the base or if you are If buttons on the handset are not pressed within 30 seconds, the handset Confirm menu option. Delete characters on screen out of range. will go into standby mode. when entering names and 2. Dialing a telephone number. b to BATTERY PERFORMANCE numbers. Indicates a missed call. Menu map 3.2.2   Preparatory dialling Go back to previous menu In ideal conditions, a fully charged battery should give up to 10 hours of Steady when making an outgoing call. 1. Use the keypad to dial a number, if you make a mistake press Talk / Flash level is displayed on the Phonebook Ring tones Area code Press t to dial. talk time or up to 200 hours standby time on a single charge.1 Make or answer a call. screen. Flashes to indicate an incoming or internal call. View Key tone Flash time delete the last digit. A Note that a new battery does not reach it’s full capacity until it has been Use flash (F) functions. Indicates an incoming call when viewing the calls list. Add new Docking tone Dial mode 2. End call / Switch handset put to normal use for several days. Edit Battery tone Auto clock Press e, or place the handset back on the base or charger. * / Intercom on/off Indicates an outgoing call when viewing the calls list. 3.2.3   End a call To keep your battery down at least one time per week will help prolong Press and hold to make End a call. Delete1 Phone name Register battery life. an internal call. When in a menu, go back Hands-free is on. Delete all1 Date & time Unregister Dial a *. to standby mode. Running the battery right down at least once a week will help them last Press and hold to switch Phone setup Language Reset 3.2.4   Receive a call as long as possible. Hands-free handset off (when in Handset ringer is off. Sounds Services When you receive an external call, the phone rings and icon flashes Ring volume Call list type 1. Press t to answer the call. Activate and deactivate standby) or on. The charge capacity of the rechargeable battery will reduce with time Indicates new voicemail messages received .1 on the display. hands-free during a call. as it wears out, giving the handset less talk / standby time. Eventually it IMPORTANT Pause / # / Change case Off when there is no voicemail messages. 1 Only available when an phonebook entry is already stored. will need to be replaced. Hands-free activation can Press and hold to enter a pq Indicates you can scroll through a list or adjust the volume in talk mode. suddenly increase the pause (P) when pre-dialling 3.3   Adjust the earpiece volume After charging your handset for the first time, subsequent charging time Indicates more text after the displayed information. f volume in the earpiece to or storing numbers. u is about 6–8 hours a day. The battery and handset may become warm A Page a very high level. Make Dial a #. During a call, press u or d to increase or decrease the volume. There In standby mode, press to ring the handset(s). are 5 levels to choose from. H sure the handset is not during charging. This is normal. too close to your ear. When entering letters / Battery is fully charged. Press and hold to enter registration mode when registering editing, press and hold to 3.4  Mute l 1 All talk and standby times are approximate and depend on features change the case from Abc Battery is partially charged. handsets. Redial to abc or ABC mode. selected and usage pattern. In standby mode, press Mute You can mute your handset so that you can talk to someone nearby E M Mute / unmute the When viewing the Calls Battery is running low. to open the redial list. Microphone List press to change the without your caller hearing. microphone during a call. CID format. Flashes when battery is almost fully discharged. 1. During a call, press . The display shows Mute on and your caller M again to resume your call. 1This feature is dependent on your Network Service provider supporting cannot hear you. the service. A subscription fee may be payable. 2. Press If more than 2 handset are registered to the base press and hold * b 3.5  Intercom 6. 6. Edit the number if necessary, then press m to save. 4. Phonebook WRITING TIPS 4.5   Delete all entries 3.5.1   Make an internal call m and scroll d to the handset that is to join the call and press . 3.7.3   Delete an entry You can store up to 50 names and numbers in the phonebook. Names Press to delete the last character or digit. 1. Press m. The display shows Phonebook. m to connect all three r m. The display shows View. 0 to insert a space. If more than one handset is registered to the base, internal calls can be 7. When the other handset answers, press can be up to 14 characters long and numbers up to 24 digits. Press u or d to move between characters. 2. Press 1. Press to open the Redial list. Scroll d to Delete all and press m. made between two handsets. icon flashes and the display shows the m. Press e to end the call. callers to begin the conference call. 4.1   Store a name and number Press 3. Scroll u or d to the entry you want. Press If only 2 handsets are registered to the base, press * and the other handset number you are calling. 2. m to confirm or b to cancel. 8. m. The display shows Confirm?. Press m to confirm or b to cancel. If the C100xLX is connected to a PABX, you may need to enter a pause in 4.2   View or dial an entry 4. The display shows Confirm?. 1. 3. Scroll d to Delete and press 3.6  Hands-free a stored number. This gives the PABX time to find an outside line. 5. Press If more than 2 handset are registered to the base press * and handset rings automatically. 4. 1. Press u. A pause is normally stored after the PABX access code (e.g. 9). 2. scroll d to the handset that is to be called and press t. To talk to the caller without holding the handset or for other people in 3.7.4   Delete the entire Redial list When storing a number, press and hold # until the display shows P. 2. Scroll u or d to the entry you want. 5. Phone setup the room to listen to the conversation over the loudspeaker simply use the hands-free function. 1. Press r to open the Redial list. You can then continue storing the phone number. OR 5.1  Sounds Press m. Scroll d to Delete all. The display shows Confirm?. Enter the first letter of the name to search alphabetically. Press m to confirm or b to cancel. 3.5.2   Receive an internal call If you have subscribed to Caller ID Service and wish to display the name 1. Dial the number and then press h. 3.6.1   Make a hands-free call 2. The first name that starts with this letter or the nearest letter in the When you receive an internal call, icon flashes and the handset of your caller as well as the number, save the full telephone number 5.1.1   Ringer volume Press e to end the call. 3. alphabet will be 1. Press t to answer the call. number that is calling you is displayed. including the area code to your phonebook. You can adjust the ringer volume and set different volume levels. Press t to dial or e to return to standby. 2. 3.8   Lock / unlock the keypad You can store multiple entries, a telephone number may only be saved displayed. Scroll u or d to the entry you want. Choose from 5 volume levels or Off. m Press h to answer the call in hands-free. 3.6.2   Answer a call hands-free When the keypad is locked, you can still answer incoming calls and once. However, to prevent unnecessary duplicated entries, you can only 3. 1. Press , scroll d to Phone setup. m. The display shows Sounds. 3.5.3   Transfer a call operate the handset in a normal fashion during a call. When the call store the same number once. 4.3   Edit a name and number 2. Press You can transfer an external call to another handset registered to the ends, the keypad lock resumes in place. m m. The display shows Phonebook. Press m. The display shows Ring volume. Press h to switch the call between the earpiece and the loudspeaker. base. NOTE 1. Press . The display shows Phonebook. 3. m. The display shows View. 1. Press m. The display shows View. Press m, scroll u or d to select the volume (1 -5 or OFF) . Press m to confirm or b to return to the previous menu. NOTE 2. Press 4. If only 2 handsets are registered to the base, press and hold * and During an external call: 2. Press Scroll d to Edit and press m. During a hands-free call, press u or d to adjust the volume. When the keypad is locked, you can still answer incoming calls and 3. Scroll down to Add new. 5. m. The display shows Enter name. 2. operate the handset in a normal fashion during a call. When the call 3. 0 the other handset rings automatically. 3.7  Redial 4. Press 5.1.2   Ringer tones ends, the keypad lock resumes in place. Scroll u or d to the entry you want to edit, or search alphabetically Enter the name and press m. The display shows Enter number. 4. m * and scroll dto the handset that is to be called and press . b 3. If more than 2 handsets are registered to the base press and hold The last 10 entries dialed are stored in the redial list. 1. Press and hold . 5. and press . The existing name is displayed. You can set different ringer melodies for your internal and external calls. m Enter the number and press m to save. When the other handset answers, press e to complete the transfer. 0 again. 3.7.1   View or dial an entry Keys locked is displayed. 6. 5. Press to delete the name if required, then enter the new name Choose from 10 different ringer melodies. r m b 4. 1. Press to open the Redial list. 2. To unlock the keypad, press and hold ENTERING NAMES and press . The existing number is displayed. NOTE You will hear a sample ring as you scroll to each ring melody. Press t to dial the displayed entry or press e to return to standby. 2. Scroll u or d to the entry you want. 6. Press to delete the number if required, then enter the new m m NOTE 3.9   Paging / Find handset Use the keypad letters to enter names, e.g. to store TOM: Your external call resumes automatically after 1 minute if there is no 3. You can alert a handset user that they are wanted or locate a missing Press 8 once to enter T. number and press to save. 1. Press , scroll d to Phone setup. m. The display shows Sounds. answer. 3.7.2   Copy a Redial list number to the phonebook handset. 6 4.4   Delete an entry 2. Press Press m. Scroll d to Ring tones. Press three times to enter O. r to open the Redial list. 6 m. The display shows Phonebook. 1. Press p on the base. All handsets registered to the base will ring. 3.5.4   3-way conference call Paging calls cannot be answered by a handset. 1. Press 3. Press once to enter M. Press m, scroll u or d to select the melody (1 -10) . 1. Press m. The display shows View. Press m to confirm or b to return to the previous menu. You can hold a 3-way conference call between 2 internal callers and 1 To stop the ringing, press p on the base again or press any button 2. Press 4. 2. Scroll u or d to the entry you want. Scroll d to Delete and press m. external caller. 3. Press m. The display shows Save number. 2. 3. 5. If only 2 handsets are registered to the base, press and hold * and During a call with an external caller: Press m again. The display shows Enter name. on the handset. 5.1.3   Key tones on/off 4. Scroll u or d to the entry you want to delete, or search m 4. m to confirm or b to cancel. 5. Enter the name and press m. The number is displayed. alphabetically and press . The display shows Confirm?. When you press a button on the handset keypad, you will hear a beep. the other handset rings automatically. 5. You can switch these beeps on or off. 5. Press

m, scroll d to Phone setup. 5.3  Date & time m, scroll d to Services and press m. • The Master PIN is required before you can register or unregister 2. Scroll d to Reset and press m. The Calls list also alerts you when you have unanswered calls. m, scroll d to Phone setup. 1. Press m. 1. Press handsets. The PIN is 0000. Press m. The display shows Sounds. Scroll d to Area code is displayed. Press m. 1. Press 3. Confirm? is displayed. Press The caller’s details are stored in the Calls list whether or not you have Press m. The display shows Sounds. 2. 2. 6.6.1   Register a handset answered the call. The list is shared by all handsets registered to the Press m. Scroll d to Key tone. m to confirm. 2. 6.8  Default settings Scroll d to Date & time and press m. 3. 3. Using the keypad enter the area code and press At the base: base. When the list is full, and a new call is received, the oldest entry will Press m, u or d to select On or Off and press m to confirm. Press and hold the p on the base until the base beeps. You have 3. be deleted automatically. 4. 6.3  Flash time 1. Handset name HANDSET Phonebook Empty 4. Enter the date using the keypad (e.g. 08--12--14 for 12th of August m 5.1.4   Docking tone on /off Low battery beeps ON Calls list Empty When you have missed call(s) (incoming calls that you haven’t answered) 2014) and press to confirm. Depending on your country and network operator, your C100xLX has the 120 seconds in which to register a handset. the display will show X Missed call(s) and the icon will flash on all handsets When you replace the handset in the base you will hear a double beep. 5. Enter the time using the 12 hour format hh:mm, e.g. 02:45 for 2:45. flash time set as 600 ms (Long). It is unlikely that you need to change this At the handset: Docking tone ON Redial list Empty registered to the base. Press m to see the callers details. m. Key tone ON PIN code 0000 m to confirm. You can switch this beep on or off. setting unless advised to do so. m , scroll d to Phone setup. 6. Scroll u or d to select am or pm and press m m 1. If the handset is not already registered to a base, press Ringer melody 1 Dial mode Tone 7.2.1   View the Calls list Or if the handset is already registered to a base, press m scroll d 1. Press 1. Press , scroll d to Services and press . 2. Press m. The display shows Sounds. 5.4  Language 2. Scroll d to Flash time and press m. 2. to Services and press m. Scroll d to Register and press m. Ringer volume 3 Flash mode Long (600 ms) 1. Press d to open the Calls list. If there are no calls in the list, the Press m. Scroll d to Docking tone. 1. Press m, scroll d to Phone setup. m to confirm. Ear volume 1 Keypad lock OFF display shows List empty. When the display shows PIN, enter the base PIN and press m. 3. 3. Press u or d to select Short, Medium or Long and press Press m, u or d to select On or Off and press m to confirm. Press m. The display shows Sounds. 7. Caller ID and the Calls list 3. • The most recent number or name if stored in the phonebook 4. 2. 6.4  Dial mode is displayed. Scroll d to Language and press m. When the handset registers with the base, it is assigned a handset 5.1.5   Battery tones 3. IMPORTANT 2. Press u or d to scroll through the list. Your C100xLX is set to tone dialing. You should only need to change this number. When you the battery is running low you will hear a warning beep. You 4. Scroll u or d to select the required language and press m to if connected to an older type of PABX / PBX which requires pulse dialing. 6.6.2   Un-register a handset To use Caller ID, you must first subscribe to the service from your network • If the call was answered, icon is displayed as you scroll to the can switch this beep on or off. confirm. 1. Press m m , scroll d to Services and press . provider. A subscription fee may be applicable. entry. If the call was unanswered, icon is displayed as you m Use one handset to delete another. You cannot delete the handset that 1. Press , scroll d to Phone setup. 6. Services Scroll d to Dial mode and press m. you are using. To ensure that the caller’s name is displayed, make sure you have stored scroll to the entry. b 2. Press m. The display shows Sounds. the full telephone number, including the area code in the phonebook. 2. 3. Press u or d to select Tone or Pulse and press m to confirm. 1. Press m, scroll d to Services and press m. • If the telephone number is longer than 16 digits, u icon is Press m. Scroll d to Battery tone. 6.1  Call List type If the call is blocked, Private will be displayed. displayed. Press to see the remaining digits. 3. m. Scroll d to Unregister and press If the number is unavailable, Unknown will be displayed. m Press m, u or d to select On or Off and press m to confirm. You can set the Call list to show All calls or Missed calls only. If All calls 6.5   Switch Auto clock on / off 2. • Press to access the option to store the entry in your Enter the 4 digit master PIN and press m. 4. If the call is from the operator, Operator will be displayed. is selected, press d key in idle and you can view all calls lists. If Missed If you have subscribed to a Caller ID Service, the date and time will be 3. phonebook. If the call is from a payphone, Payphone will be displayed. m When viewing a calls list number press # to toggle the Calls List 5.2  Handset name calls is selected, press d key in idle and you can view missed call only. set on all your handsets whenever a call is received. This feature can be Display shows the first registered handset number. • Press twice to see the time and date of the call. m m If the call is from a ringback request, Ringback will be displayed. If you are using more than one handset with your C100xLX base, you can 1. Press , scroll d to Services and press . set to On or Off. 3. set a personalized name for each handset to easily distinguish between 2. The display shows Call list type, press m. 1. Press m m , scroll to Services and press . 4. Scroll u or d to select the handset you want to delete and press m . 7.1  Caller ID between different formats, e.g. YYY-YYYY, AAA-YYY-YYYY or them. 3. Scroll u or d to select All calls or Missed calls and press m to 2. Scroll d to Auto clock and pressm. Unregistered is displayed on the handset screen. If you have subscribed to a Caller ID Service, you will be able to see 1-AAA-YYY-YYY. Scroll d to On or Off then press m to confirm. A name can be up to 14 characters long. your caller’s number on your handset (provided it is not withheld) 7.2.2   Dial a number in the Calls list 1. Press m , scroll d to Phone setup. confirm. 3. 6.7   Restore default settings prior to answering the call. The display can show the first 16 digits or 14 1. Press d to open the Calls list. Press m. The display shows Sounds. 6.2   Area code 6.6  Registration You can restore your C100xLX to its default (original) settings. characters of the phone numbers. 2. Press t to dial the displayed entry. 2. Scroll u or d to the entry you want. Scroll d to Phone name and press m. You can set your local area code into the phone. When a number from Up to 4 handsets can be registered to one base station. Additional All the handsets that are registered to the base will be retained. If your caller’s name and number are stored in the phonebook and a 3. number match is found, you will see the caller’s name on the display as 3. m to confirm. that area code calls only the local number will be displayed and stored. handsets must be registered to the base before you can use them. IMPORTANT b. 4. Enter the new handset name and press The area code can be up to 5 digits long. • The instructions described below apply specifically to your C100xLX well. Resetting your phone to its default setting will delete all entries in the 7.2.3   Copy a Calls list number to the phonebook Delete the current name by pressing **Notation if area code is stored in phone it will not display full handset. If you wish to register another manufacturer’s handset, the Phonebook and Calls list. All handset and base settings will also be reset. 7.2  Calls list 1. Press d to open the Calls list. number** instructions may vary. In this case, please refer to the manufacturer of the additional handset. 1. Press m, scroll d to Services and press m . The Calls list stores details of your last 50 received calls, including the 2. Scroll u or d to the entry you want. phone number, date and time of call. 3. Press m, the display shows View. icon flashes Handset does not ring 7. Do not disassemble this product. If service or repair work is required, 7. Clean this product with a soft, damp cloth. Do not use chemicals or BINATONE or its authorized distributor at its option and within a m. • Handset is out of range. Move closer to the base. • The handset ringer volume may be set to Off. contact the customer service helpline found in this User’s Guide. cleaning agents to clean this phone. commercially reasonable time, will at no charge repair or replace any 4. Scroll d to Save number and press 8. Do not overload wall outlets and extension cords. 8. Use only the power supply that came with this unit. Using other Products or Accessories that does not 5. The display shows Enter name. • Make sure that the handset is registered to the base. Noise interference on my phone or on other conform to this Warranty. We may use functionally equivalent 9. Avoid using during an electrical storm. Use a surge protector to power supplies may damage the unit. electrical equipment nearby m. The number is displayed. • Check that the power adapter is connected and you have a working 6. Enter the name and press outlet. protect the equipment. 9. Because this phone operates on electricity, you should have at least reconditioned/ refurbished/ pre-owned or new Products, Accessories • Place your C100xLX at least 3 feet away from electrical appliances or Edit the number if necessary, then press m. The number is stored. one phone in your home that operates without electricity in case of a or parts. 7. any metal obstructions to avoid any risk of interference. 10. Do not use this phone to report a gas leak, especially if you are in the Keypad is not responding vicinity of the gas line. power outage. What Other Limitations Are There? 7.2.4   Delete an entry • If wrong PIN is entered a beep is played. You can enter the PIN • Check that the keypad lock is not on. once again. 10. To avoid interference to nearby appliances, do not place the base of ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION 1. Press d to open the Calls list. CAUTION the phone on or near a TV, microwave oven, or VCR. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS icon is not scrolling during charge To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA 2. Scroll u or d to the entry you want. 9. General information CAUTION FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE m, the display shows View. • Adjust the handset slightly on the base. Certified Telecommunication Line Cord. DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR 3. Press • Clean the charging contacts with a cloth moistened with alcohol. If your product is not working properly... To maintain compliance with the FCC’s RF exposure guidelines, place Scroll d to Delete and press m. The display shows Confirm?. Unplug this cordless phone immediately from an OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED Press m to confirm or b to cancel. 4. • Check that the power adapter is connected and you have a working 1. Read this User’s Guide. the base unit at least 8 inches from nearby persons. WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND outlet. outlet if: IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF 5. 2. Visit our website: www.motorola.com • The power cord or plug is damaged or frayed. Battery Safety Instructions 7.2.5   Delete the entire Calls list • The battery is full. When the handset is fully charged, icon will • Do not burn, disassemble, mutilate, or puncture the battery. The IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, 3. Contact Customer Service in the US and Canada at appear steady on the display. • Liquid has been spilled on the product. battery contains toxic materials that could be released, resulting in WHETHER IN CONTRACT OR TORT (INCLUDING 1. Press d to open the Calls list. 1-888-331-3383 NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE m, the display shows View. • The product has been exposed to rain or water. Do not retrieve injury. 2. Press No Caller ID Email: motorola@encompass.com the handset or base until after you have unplugged the power and PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, m. The display shows Confirm?. 4. Press m to confirm or b to cancel. 3. Scroll d to Delete all and press • Check your subscription with your network operator. Important safety instructions phone from the wall. Then retrieve the unit by the unplugged cords. Consumer Products and Accessories INCIDENTAL, SPECIAL OR • The caller may have withheld their number. • The product has been dropped or the cabinet has been damaged. CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE Follow these safety precautions when using your phone to reduce the • The product exhibits a distinct change in performance. Limited Warranty (“Warranty”) OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR • The record cannot be found in your phonebook. Check that you risk of fire, electric shock, and injury to persons or property: Thank you for purchasing this Motorola branded product manufactured OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION 8. Help have the correct name / number stored in your phonebook, with the full area code. 1. Keep all vents and openings of the phone unblocked. Installation Guidelines under license by Binatone Electronics International LTD (“BINATONE”). WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR No dial tone **Notation if area code is stored in phone it will not display full Do not set the phone on a heating register or over a radiator. Ensure 1. Read all instructions and save them for future reference. What Does this Warranty Cover? ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE • Use only the telephone line cord supplied. number** that proper ventilation is provided at the installation site. 2. Follow all warnings and instructions marked on the product. Subject to the exclusions contained below, BINATONE warrants that DISCLAIMED BY LAW. • Check that the telephone line cord is connected properly. 2. Do not use while wet or while standing in water. 3. Do not install this product near a bath tub, sink, or shower. this Motorola branded product (“Product”) or certified accessory Some jurisdictions do not allow the limitation or exclusion of incidental • Check that the power adapter is connected and you have a I have forgotten my PIN! 3. Do not use this product near water (for example, near a bath tub, (“Accessory”) sold for use with this product that it manufactured to be or consequential damages, or limitation on the length of an implied 4. Operate this phone using only the power source that is indicated working outlet. • Restore your C100xLX to its default settings, see “6.7 Restore kitchen sink, or swimming pool). free from defects in materials and workmanship under normal consumer warranty, so the above limitations or exclusions may not apply to you. default settings”. on the marking label. If you are unsure of the power supply to your usage for the period outlined below. This Warranty is your exclusive This Warranty gives you specific legal rights, and you may also have 4. Do not allow anything to rest on the power cord. Place the power home, consult with your dealer or local power company. No display warranty and is not transferable. other rights that vary from one jurisdiction to another. • Check that the battery is inserted correctly and fully charged. Use Cannot register a handset to the base cord so that it will not be walked on. 5. Do not place this product on an unstable cart, stand, or table. This Who is covered? Check that the handset is switched on. Press and hold e. only the approved rechargeable battery supplied. • You can register up to a maximum of 4 handsets to a C100xLX base. 5. Never insert objects of any kind into the product vents as that may product may fall, causing serious damage to the product. You must un-register a handset in order to register a new one. This Warranty extends only to the first consumer purchaser, and is not • result in fire or electric shock. 6. Adjust only those controls that are covered by the operating transferable. • Check that you have entered the correct PIN code (default = 0000). 6. Unplug this product from the electrical outlet before cleaning. Do instructions. Improper adjustment of other controls may result in • Reset the base by removing the battery and disconnecting the electrical SAVE THESE INSTRUCTIONS outlet. Wait for around 15 seconds before connecting it again. Allow up • Check that you are at least 3 feet away from other electrical not use liquid cleaners or aerosol cleaners. Use a damp cloth for damage and will often require extensive work to restore the product equipment to avoid interference when registering. to normal operation. What will BINATONE do? to one minute for the handset and base to synchronize. cleaning. than MOTOROLA, BINATONE or its authorized service centers, are requirements for a Class B digital device under Part 15 of the Federal standard(s). Operation is subject to the following two conditions: (1) this If this equipment is malfunctioning, it must be unplugged from the the requirement that the sum of the RENs of all the devices does not Products Covered Length of Coverage exceed five. excluded from coverage. Communications Commission (FCC) rules. These requirements are device may not cause interference, and (2) this device must accept any modular jack until the problem has been corrected. Repairs to this Consumer Products One (1) year from the date of the products Altered Products. Products or Accessories with (a) serial numbers or intended to provide reasonable protection against harmful interference interference, including interference that may cause undesired operation telephone equipment can only be made by the manufacturer or its This equipment meets the applicable Industry Canada Terminal original purchase by the first consumer date tags that have been removed, altered or obliterated; (b) broken in a residential installation. This equipment generates, uses and can of the device. authorized agents. For repair procedures, follow the instructions outlined Equipment & Technical Specifications. purchaser of the product. seals or that show evidence of radiate Le present appareil est conforme aux CNR d’Industrie Canada under the Limited Warranty. Placing the receiver slightly above the ear may result in better Consumer Accessories Ninety (90) days from the date of the tampering; (c) mismatched board serial numbers; or (d) nonconforming radio frequency energy and, if not installed and used in accordance applicables aux appareils radio exempts de licence. L’exploitation If this equipment is causing harm to the telephone network, the performance for hearing aids with microphones positioned behind the accessories original purchase by the first or non-Motorola branded housings, or parts, are excluded from with the instructions, may cause harmful interference to radio est autorisee aux deux conditions suivantes : (1) l’appareil ne doit pas telephone company may temporarily discontinue your telephone ear. consumer purchaser of the product. coverage. communications. However, there is no guarantee that interference will produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout service. The telephone company is required to notify you before Specific Absorption Rate (SAR) information not occur in a particular installation. If this equipment does cause harmful brouillage radioelectrique subi, meme si le brouillage est susceptible interrupting service. If advance notice is not practical, you will be Consumer Products and The balance of the original warranty Communication Services. Defects, damages, or the failure of Products interference to radio or television reception, which can be determined SAR tests are conducted using standard operating positions accepted d’en compromettre le fonctionnement. notified as soon as possible. You will be given the opportunity to correct or for ninety (90) days from the date or Accessories due to any communication service or signal you may by turning the equipment off and on, the user is encouraged to try to by the FCC with the phone transmitting at its highest certified power Accessories that are the problem and the telephone company is required to inform you of Repaired or Replaced returned to the consumer, whichever is subscribe to or use with the Products or Accessories is excluded from correct the interference by one or more of the following measures: FCC Part 68 and ACTA your right to file a complaint with the FCC. Your telephone company level in all tested frequency bands, although the SAR is determined at longer. coverage. This equipment complies with Part 68 of the FCC rules and with the highest certified power level, the actual SAR level of the phone while • Reorient or relocate the receiving antenna. may make changes in its facilities, equipment, operation, or procedures How to Obtain Warranty Service or Other Information? technical requirements adopted by the Administrative Council for operating can be well below the maximum value, in general, the closer Exclusions To obtain service or information, please call: • Increase the separation between the equipment and receiver. that could affect the proper functioning of this product. The telephone you are to a wireless base station antenna, the lower the power output. Terminal Attachments (ACTA). This Product Complies With 47CFR company is required to notify you if such changes are planned. • Connect the equipment into an outlet on a circuit different from Before a new model phone is a available for sale to the public, it must be Normal Wear and Tear. Periodic maintenance, repair and replacement US and Canada: 1-888-331-3383 that to which the receiver is connected. PART 68. If this product is equipped with a corded or cordless handset, it is of parts due to normal wear and tear are excluded from coverage. tested and certified to the FCC that it does not exceed the exposure Email: motorola@encompass.com • Consult the dealer or an experienced radio/TV technician for help. The plug and jack used to connect this equipment to premises wiring hearing aid compatible. limit established by the FCC, Tests for each phone are performed Batteries. Only batteries whose fully charged capacity falls below 80% of You will receive instructions on how to ship the Products or Accessories and the telephone network must comply with applicable Part 68 rules If this product has memory dialing locations, you may choose to store Changes or modifications to this equipment not expressly approved by in positions and locations (e.g. at the ear) as required by the FCC. their rated capacity and batteries that leak are covered by this Warranty. at your expense and risk, to a BINATONE Authorized Repair Center. and technical requirements adopted by ACTA. A compliant telephone emergency telephone numbers (e.g., police, fire, medical) in these the party responsible for compliance could void the user’s authority to This handset has also been tested and meets the FCC RF exposure cord and modular plug is provided with this product. It is designed to be locations. If you do store or test emergency numbers, please: Abuse & Misuse. Defects or damage that result from: (a) improper To obtain service, you must include: (a) the Product or Accessory; (b) operate the equipment. guidelines. Use of other accessories may Non-compliance with the connected to a compatible modular jack that is also compliant. An RJ11 • Remain on the line and briefly explain the reason for the call before operation, storage, misuse or abuse, accident or neglect, such as the original proof of purchase (receipt) which includes the date, place This device complies with Part 15 of the FCC rules. Operation is subject above restrictions may result in violation of RF exposure guidelines. jack should normally be used for connecting to a single line and an RJ14 hanging up. physical damage (cracks, scratches, etc.) and seller of the Product; (c) if a warranty card was included in your box, to the following two conditions: (1) this device may not cause harmful jack for two lines. See Installation Instructions in the User’s Guide. • Perform such activities in off-peak hours, such as early morning or to the surface of the product resulting from misuse; (b) contact with a completed warranty card showing the serial number of the Product; interference, and (2) this device must accept any interference received, liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or (d) a written description of the problem; and, most importantly; (e) your The Ringer Equivalence Number (REN) is used to determine how many late evening. including interference that may cause undesired operation. Privacy of the like, extreme heat, or food; (c) address and telephone number. devices you may connect to your telephone line and still have them ring communications may not be ensured when using this telephone. when you are called. The REN for this product is encoded as the 6th and Industry Canada Service Center Information use of the Products or Accessories for commercial purposes or These terms and conditions constitute the complete warranty To ensure safety of users, the FCC has established criteria for the amount 7th characters following the US: in the product identifier (e.g., if ## is Operation is subject to the following two conditions: (1) this device may subjecting the Product or Accessory to abnormal usage or conditions; or agreement between you and BINATONE. regarding the Products or of radio frequency energy that can be safely absorbed by a user or USA: 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should not cause harmful interference, and (2) this device must accept any (d) other acts which are not the fault of MOTOROLA or BINATONE., are Accessories purchased by you, and supersede any prior agreement bystander according to the intended usage of the product. This product be five (5.0) or less. For more information, please contact your local interference, including interference Encompass Supply Chain Solutions, Inc. excluded from coverage. or representations, including representations made in any literature has been tested and found to comply with the FCC criteria. Both the telephone company. that may cause undesired operation. 775 Tipton Industrial Dr. Suite D Lawrenceville, GA 30046 Use of Non-Motorola branded Products and Accessories. Defects or publications or promotional materials issued by BINATONE. or Handset may be safely held against the ear of the user. The telephone This equipment may not be used with Party Lines. If you have specially The term “IC: “ before the certification/registration number only signifies Tel no.: 1-800-881-3344 damage that result from the use of Non-Motorola branded or certified representations made by any agent employee or staff of BINATONE, that base shall be installed and used such that parts of the user’s body other wired alarm dialing equipment connected to your telephone line, ensure that the Industry Canada technical specifications were met. Products or Accessories or other peripheral equipment are excluded may have been made in connection with the said purchase. than the hands are maintained at a distance of approximately 20 cm (8 Canada: the connection of this equipment The Ringer Equivalence Number (REN) for this terminal equipment from coverage. Unauthorized Service or Modification. Defects or FCC, ACTA and IC regulations inches) or more. does not disable your alarm equipment. If you have questions about is 0.0B. The REN is an indication of the maximum number of devices Lenbrook Industries Ltd damages resulting from service, testing, adjustment, installation, This Class B digital apparatus complies with Canadian ICES-003. what will disable alarm equipment, consult your telephone company or FCC Part 15 allowed to be connected to a telephone interface. The termination on 633 Granite Court, Pickering, ON L1W 3K1 maintenance, alteration, or modification in any way by someone other This device complies with Industry Canada licence-exempt RSS a qualified installer. This equipment has been tested and found to comply with the an interface may consist of any combination of devices subject only to Tel no.: 905-831-6555


Document Created: 2014-04-21 16:32:39
Document Modified: 2014-04-21 16:32:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC