RF Exposure Info

FCC ID: VLJ-CN28BU

RF Exposure Info

Download: PDF
FCCID_4366892

Produkte Products Prüfbericht - Nr.: 50264671 001 Seite 28 von 30 Test Report No. Page 28 of 30 6 Safety Human Exposure 6.1 Radio Frequency Exposure Compliance 6.1.1 Electromagnetic Fields RESULT: Pass Test Specification Test standard : CFR47 FCC Part 2: Section 2.1091 CFR47 FCC Part 1: Section 1.1310 FCC KDB Publication 447498 v06 FCC KDB Publication 865664 D01 v01r04 FCC KDB Publication 865664 D02 v01r02 RSS-102 Issue 5 March 2015  FCC requirements FCC requirement: Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 20cm normally can be maintained between the user and the device. MPE Calculation Method according to KDB 865664 D01 Power Density: S(mW/cm2)= PG/4πR2 or EIRP/4πR2 Where: S = power density (mW/cm 2) P = power input to the antenna (mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm) The nominal maximum conducted output power specified: 2.4GHz FHSS: 20.00 dBm Wi-Fi 802.11 b/g/n: 22.00 dBm From the peak RF output power, the minimum mobile separation distance, d=20 cm, as well as the antenna gain (Max. 0.0 dBi for 2.4GHz FHSS, 0.0 dBi for Wi-Fi 802.11 b/g/n), the RF power density can be calculated as below: For 2.4GHz FHSS: S(mW/cm2)= PG/4πR2 = 0.005 mW/cm2 For Wi-Fi 802.11 b/g/n: S(mW/cm2)= PG/4πR2 = 0.016 mW/cm2 Limits for Maximum Permissible Exposure (MPE) according to FCC Part 1.1310: 1.0 mW/cm2


Document Created: 2019-06-25 13:42:54
Document Modified: 2019-06-25 13:42:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC