Users Manual

FCC ID: VKY13107

Users Manual

Download: PDF
FCCID_835696

> wiNPLUS * Be sure to check the camera‘s position and mounting angle before each use. VEHICLE BACKUP CAMERA * Make sure the trunk, hatch, or backdoor is completely and securely closed when backing up. wIRELESs sysTEm + If the back of the vehicleis hit, the position and mounting angle of the Vehicle Back—Up Camera may change. + When washing the vehicle with high pressure water, be sure not to spray it around INSTALLATION AND OPERATION MANUAL the camera. Otherwise, water may enter the camera unit causing water condensa— tion on the lens, a maifunction, fire or an electric shock. Thank you for purchasing the WINPLUS Vehicle Back—Up Camera * Do not strike the camera. it is a precision instrument. Otherwise, it may maifunc— Wireless System. This back—up camera system was designed to give tion or cause damage resulting in a fire or an electric shock. additional convenience when driving or operating your vehicle. All parts needed to install and operate the system are included in this * This product will only provide images of items that are within the field of view of package. the camera. Thus, it is imperative that the camera should be kept clean and unobstructed, and should mounted so that its field of view includesthe entire area For questions or installation issues regarding the Vehicle Back—Up behind your vehicle. Camera Wireless System, please contact WINPLUS at 866.294.9244 to speak to one of our installation specialist. You can also contact us via email at info@WINPLUSusa.com. COMPONENTS INSTALLATION Contact WINPLUS regarding: I INSTRUCTIONS + Damaged or missing parts > * Installation and operation These installation instructions do not apply to * Product issues or problems all types of vehicles. They are meant only as a * Warranty Service general guide due to the large number of vehicle makes and models. For vehicle IF YOU ARE EXPERIENCING ANY ISSUES WITH THE SYSTEM DURING INSTALLATION OR OPERATION, DO NOT RETURN specific questions, contact your vehicle‘s 3.5" LCD Monltor PRODUCT TO STORE. Contact WINPLUS for instructions on how to manufacturer. return the product. Consult your local motor vehicle laws on the use of this product to be sure it is permitted. PRIOR TO INSTALLATION WARNING: Back Up Camera Read all the installation instructions carefully before installing the product. "Through installation of the Vehicle Back—Up Improperinstallation will void manufacturer‘s warranty. The installation instruc— ! ! Camera you should be sure not to degrade the tions do not apply to all types of vehicles, and are written as guidelines to assist Velcra tape Vent clips safety of any system or device on your vehicle, in installing the system. including Federal Motor VehicteSafety Stan— dards. Consult an experienced technician if you are not comfortable installing the «Improper installation and wiring of the Vehicle product. You can also contact WINPLUS at 866.294.9244 to speak to one of our Back—Up Camera system may damage the installation specialist if you have any specific questions regarding Vehicle M"::it‘;;“"”b:;;‘gggnfigfld Rettionalmoyot vehicle‘s electrical system, including vital Back—Up Camera Wireless System. vehicle computer and operating systems. That > could lead to an accident or fire, causing BEFORE using the Vehicle Back Up Camera, please read the following safety property damage and/or serious personal information. ALWAYS use the Vehicle Back Up Camera as outlined here. 12 Volt Adaptor uSsB Cable jnjury. It is highly recommended to seek , professional installation advice from a qualified Wamng " auto electrician or, in the alternative, to have Monitor Hardwiting Hamess AV Cable * A failure to read and follow these warnings and instructions may result in (optional use} the installation performed by a qualified auto a serious accident, including damaged property or a sB neg @ electrician. serious injury, including loss of life, * The Vehicle Back—Up Camera is designed as an aid to the driverin detect— ffi »Gourc,, HOW TO INSTALL THE MONITOR ing large stationary objects to help avoid damaging the vehicle. However, Monitor Mounting you, the driver, must use it safely and properly. Use of the Vehicle Backup x6 . The Vehicle Backup Camera Wireless System Camera is not a substitute for safe, proper and legal driving. Cable Ties Monitor cart,be mounted or placed in various locations within the vehicle. The following * Never back up while looking only at the screen. You should always check provides mounting instructions for the recom— behind and around the vehicle when backing up jJust as you would if the vehicle did not have the Vehicle Back—Up Camera. Always make sure your intended mended locations. path is clear. If you back up while looking only at the monitor, you may hit a vehicle, pedestrian, bicyclist, child, pet or other object resulting in injury or death. Always back up slowly. NOTICE: Please ensure that monitor is secured and mounted where * Never depend on the Vehicle Back—Up Camera entirely when backing up. The it would NOT obstruct any OEM vehicle safety features. In an event image on the screenis different from actual conditions. Objects viewed in the of an accident, manufacturer is not responsible for bodily injury rear view monitor differ from actual distance because a wide—angle lens is used. caused by the monitor being a projectile. Objects in the rear view monitor will appear visually opposite than when viewed in the rear view and outside mirrors. Use the inside mirror or glance over your CAUTION: Keep away from reach of children may cause serious injury. ~ shoulder to properly judge distances to other objects. * The Vehicle Back—Up Camera‘s "night vision" feature is an aid to a driver but is limited. Always use your own eyes to confirm the vehicle‘s surroundings, as the displayed image may be faint or dark, distorted, or not entirely visible. Always check behind and all around the vehicle visually and with mirrors before proceeding. * The area displayed by the Vehicle Back—Up Camera is limited. Vehicle Back— Up Camera does not display objects that are close to or below the bumper, underneath the vehicle, or objects out of the camera‘s field of view. The area displayed on the screen may vary according to vehicle orientation or road conditions. * The Vehicle Back—Up Camera is not intended for use during longer backing maneuvers or backing into potential crossing traffic or pedestrians. Crossing traftic or pedestrians may be approaching outside of the camera‘s field of view. TM &© 2007 WINPLUS win—1s107a 1. H#l—014t—o2z—so ucesmm 1

Select location for mounting the monitor in desired location. 7.Connect Wiring Harness‘ black wire to common ground (earth) 8.OPTIONAL: Extend and connect Wiring Harness‘ blue wire to CAUTION: Ensure monitor location will not obstruct your vision positive wiring of the reverse light. This will serve as an interrupt while driving. and will power up the monitor when the car is put in reverse. CHECKPOINT: A. DASHBOARD MOUNTING At this point, you can check if you properly connected the wires by: +Reconnecting the battery. «Turn vehicle ignition to the "Accessorles" position. i.Screw and secure the mount stand to the back of the monitor. »Connect Monitor Wiring Harness to the Monitor ii.Clean dashboard surface where monitor will be mounted. «Press Monitor "On/Off" button and walt for monltor to turn on If the camera is not yet installed, all you will see is nolse or static. ifi.Remove adhesive protector from underneath of monitor **Disconnect vehicle battery before proceeding with Installation** mounting stand. iv.Place and secure monitor mounting stand onto dashboard 9.Identify the 12V+ wire for the vehicle‘s reverse light(s). Refer to the using adhesive from tape from bottom of stand. vehicle‘s Owners Manual or vehicle wiring diagram for more v.Adjust and tilt mounting to have a better viewing angle. information. This wire runs from a switch in the vehicle‘s transmission to the vehicle‘s reverse light(s) 10.Attach blue wire from Wiring Harness to the 12V+ reverse light B. VISOR AND BACK SEAT MOUNTING wires using the supplied Scotch—Lok (see SCOTCH—LOK USAGE) 11.Monitor will automatically turn ON when vehicle transmission is [Figure 1] [Figure 2] [Figure 3] placed in reversed, and turn OFF when transmission is not in reverse. NOTE: Please refer to the 3.5" LCD MONITOR User‘s Manual for additional details regarding monitor controls and operations. USB slot to recharge ipod, mp3 players, digital cameras, Velcro straps phones, and more! i.Slide mounting straps onto back of monitor[Figure 1] ig.4 i AUBI iO it.Secure monitor on the visor using the straps.[Figure 2] H rotare it.Secure monitor to back of seat headrest using the straps. [Figure 3} | shicHtNess C. VENT MOUNTING Plugs into 12V cigarette K [Figure 4] [Figure 51 [Figure 6] socket for power HOW TO INSTALL THE CAMERA Install Vehicle Backup Camera in the top or bottom mounting screw of ratate clockwise to unfasten your vehicle‘s rearlicense plate to achieve maximum viewing angle. Back side * of Monitor Back Front Vent Clip Adjust angle i. Slide and lock vent clip to back of monitor as shown.[Figure 4] ii.Adjust to desired view angle by rotating center ring; rotate clockwise to unfasten.{Figure 5] iii. Mount monitor by sliding clip carefully into the air vent.[Figure 6] 1)Remove license plate from rear of vehicle. 2)Locate reverse tail lights and select a wiring route the camera will CAUTION: These mounting options are illustrations only, and may not use for its power source each apply to every type of vehicle. For vehicle specific questions, 3)Inspect and determine route of camera wiring to reverse lights. contact your vehicle‘s manufacturer to be sure that the installation and 4)Insert camera power wires and the antenna wires through grommet mounting location you choose will not degrade the safety of any (supplied). The grommet protects the wire from the metal edge. system or device on your vehicle, including Federal Motor Vehicle 5)Check for openings or holes where license plate is mounted to insert Safety Standards. camera wires. If no opening is available, drill a small hole (6.5mm diameter) and insert wires see Figure“a. Select a location close to the HOW TO POWER THE MONITOR Select and connect monitor power source. camera‘s power cables. Note: The Vehicle Backup Camera can be a.BASIC INSTALLATION: Power up monitor using 12V adapter installed without drilling a hole by using a pre— [Figure 7] provided 1.Plug 12V adapter to vehicle cigarette lighter socket. existing hole on the vehicle to route the wires to 2.Connect adapter to monitor power input. the reverse tail lights. 3.Press monitor‘s "ON/OFF" button CAUTION: Take extra precaution necessary to b.ADVANCE INSTALLATION: Hardwire monitor to vehicle power avoid vehicle damage. Before drilling, inspect behind source the drilling location to ensure there are no vehicle 1.REFER to vehicle Owner‘s Manual before attempting monitor wirings or components. installation to avoid corrupting the computer system or other vital operating systems in the vehicle. Before using the hardwire kit, it is highly recommended seeking assistance or professional installation 6)Insert wires into selected/drilled opening [Figure 8] from an automotive electrician. 7)Route power wires to selected reverse tail light. Ensure wires are not obstructed or tangled. WARNING: Manufacturer assumes no liability for damage caused to B)Remove light socket from its reverse light housing. vehicle due improper installation or use. CAUTION: It is highly recommended that you remove the bulbs as a precaution. 2.Use the monitor‘s Wiring Harness (supplied) for this installation 9)Connect camera power wires 3,Locate a suitable route for the Wiring Harness from the selected monitor mounting location to the vehicle fuse box 4.Disconnect the vehicle‘s battery CAUTION: Before connecting camera wires, use a 5.Identify the 12V+/ACCESSORY terminal in the vehicle‘s fuse box. Volt Meter or a Multi—Meter to determine positive and This terminal only provides power when the vehicle‘s ignition is the negative wires on the vehicle‘s reverse light turned to the ACCESSORY position wires. Vehicle wiring may vary. Refer to the vehicle 6.Connect Wiring Harness‘ red wire to this terminal Owner‘s Manual for more information.

Note: SCHEMA: CAMERA WIRING + 12 VDC REV LAMP The preset camera angle may not apply to all types of vehicle, adjust O accordingly. Scotch—Lok The camera angle should be chosen carefully to best suit your specific G ;—.—————J vehicle because it will impact the size and location of the blind spot of Reverse Lamp the rear view camera. If the camera hinges gets loose, tighten it by adjusting the screws at the back of the camera through the mounting.{[FIGURE 13] Caution: Double check the camera angle from time to time to make sure that it is always focused and adjusted to the desired point of CAUTION: Before connecting camera wires, use a Volt Meter or a Multi— view, Meter to determine positive and the negative wires on the vehicle‘s reverse light wires. Vehicle wiring may vary. Refer to the vehicle Owner‘s Manual for more information OPERATIONS a.Determine positive and negative wires. Most vehicles will have SAFE OPERATING TIPS two color wires, BLACK for negative and RED for positive. * If you replace the tires, the area displayed on the monitor may b.Disconnect vehicle battery before proceeding to the next step as a change and you may need to adjust the camera. precaution * There is a plastic cover over the camera. Do not scratch the cover c.Using the Scotch—Lok Connectors, connect camera‘s RED wire to when cleaning dirt or snow from the cover. reverse light‘s positive wire. If needed, use pliers to squeeze * The camera has a water resistant construction. Do not detach, disas Scotch—Lok and ensure a good connection. semble or modify it. This may cause incorrect operation. Camera is d.Connect camera‘s BLACK wire to reverse light‘s negative wire. water resistant but not waterproof. Secure and link wires using the Scotch—Lok Connectors. * Do not submerge camera in water, which can cause internal damage e.Secure wires with cable ties or electrical tape. to the camera. * If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system may not operate normally. CHECKPOINT: At this point, you can check If you properly connected the wires by: Camera can withstand the effects of rain, snow, and inclement weather. + Reconnecting the battery. * When the temperature is extremely high or low, the sereen may not + Turn the ignition to the "Accessories" positon. clearly display objects. * Engage the Emergency or Hand Brake. + Put the vehicle in reverse. + When strong light directly enters a camera, objects may not be displayed + Press "On/Off" button of the Monitor. clearly. If the camera and the monitor wirings are hooked up correcily, the monltor should turn + The screen may flicker under fluorescentlight. on and should display image of rear view of the vehicle * The colors of objects on the rear view monitor may differ somewhat from **Disconnect vehicle battery before proceeding with Installation** those of the actual object. * If dirt, rain or snow attaches to the camera, the monitor may not clearly display objects. If water droplets, snow or mud adhere to the camera lens, SCOTCH LOK USAGE rinse with water and wipe with a dry cloth. * Do—not use alcohol, benzene or:thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a clean a cloth — dampened with mild cleaner diluted with water and then wipe with a dry cloth. * Will work up to 30 feet. Working distance varies depending on the interference between the monitor and the camera. Insert the existing Insert the wire to be Crimp tap with pliers Then close lock *The system is only designed for backup/reserving purposes. WINPLUS is wire to be tapped. attached. with fingers not responsible for damages on the system or the vehicle if used for other 10)Pull antenna wire away from the camera power wire. purposes. 11)Secure antenna wire by using double—sided tape * ALWAYS engage Parking/Emergency/Hand Brakes of the vehicle when Note: Move antenna around to have better communication between testing the system. the camera and the monitor. * Like most wireless devices, the system may cause interference to 12) Connect bulb back into light socket. other wireless devices or vice versa. Wireless devices such as WIFI 13) Reinstall light socket into reverse light housing. routers, Bluetooth devices, and mobile handsets may cause interference 14) Slide license plate between camera and mounting{[FIGURE 9] with the monitor. If this happens you will notice rolling lines, blurry images, or static images on the monitor. [Figure 9] [Figure 10] *The system is designed to ADD safety and protection. The device was NOT designed to replace other safe driving habits. Double checking and looking around before backing up is STILL the safest way. SAFETY AROUND AND BEHIND OTHER VEHICLES Using a rear—view camera is not enough to completely overcome a vehicle‘s blind spot. Many preventable injuries and deaths occur in driveways or license plate parking lots when drivers do not see children, pets, or others near their 15)Align camera mount to license plate. [Figure 10] vehicles. Here are a few safety tips that will help you to avoid a backover Note: For maximum viewing, place camera on the center of the license plate. accident. 16)Use double sided tape to secure the camera onto the license plate. Note: Press license plate and camera mounting firmly to secure and get full * Walk completely around your vehicle before getting in. Check for kids, contact between the license plate and the double—sided tape.{FIGURE 12) toys, and pets before entering the vehicle and starting the engine. 17) Screw license plate with camera onto rear of the vehicle. + Know where children are. Have children stand in a place where they are in 18) Once camera is secured, adjust camera angle to desired point of view. full view. + Be aware of young children. Young children are small and hard to see. + Parents, caregivers and all adults need to be vigilant in supervising children, especially when children are in the yard, driveway or parking lot playing near parked cars. * Roll down your window so you will be able to hear what is happening outside your vehicle. + Owners of SUVs, trucks, and vans need to take extra care to avoid hitting or running over a child. * Teach children to move away from a vehicle wheneverit is started. es TM & © 2007 WINPLUS WIN—131078 J. Y1—ora1—R—wo +t pBrwW] ZNSTReqrop) stzes I wiN—l3197 & .

TESTING AND TROUBLESHOOTING LIMITED WARRANTY WINPLUS. North America warrants, to the original purchaser, thatits products are free TESTING: from defécts in material and workmanship for 90 days from the date of original purchase. Where permitted by law, WINPLUS North America‘s liability shall be limited to Testing: that set forth in this limited express warranty. This limited express warranty shall be the exclusive remedy of the purchaser and WINPLUS North America makes no other 1)Connect vehicle battery cables warranty of any kind aside from the limited express warranty stated above. 2)Turn ignition to "ON® position without starting the engine 3)Press monitor "ON/OFF" power button to start monitor CONDITIONS OF WARRANTY 4)Engage parking brakes and put the car in reverse If during the 90 day warranty period your new product is found to be defective, WIN— 5)Wait for monitor to show rear view image. PLUS North America will repair such defect, or replace the product, without charge for 6)if needed, switch the image orientation to acquire the correct view. Press the parts or labor subject to the following conditions: rotate button until desired image orientation is achieved. 1.All repairs must be performed by WINPLUS North America. 2.All warranty claims must be accompanied by a copy of the sales receipt or bill of sale. 3.The equipment must not have been altered or damaged through negligence, TROUBLESHOOTING: accident, improper operation, or failure to follow the product instructions for installation, use, or care. 1.Q: All I see is snow when I put my car in reverse? 4.The replacement of parts is excluded from the warranty when replacementis A: This means that there is no communication between the camera and the necessary due to normal wear and tear. monitor. 5.Repair or replacement parts supplied by WINPLUS North America under this a.Check the connection of the camera to the reverse light. Make sure all the warranty are protected only for the unexpired portion of the original warranty. wirings are secure and tighten. 6.This is a "repair or replace" warranty only, and does not cover the costs b.Refer to your vehicle manual for wiring information of the yeverselighting. incurred for the installation, removal or reinstallation of the product, or Make sure that the red wire from the camera is connected to the positive wire damage to any vehicle or vehicle electrical system. of the reverse light and the black wire of the camera is connected to the ground wiring of the reverse light OWNER‘S RESPONSIBILITIES: c.If you are using the Scotch—Lok make sure that you used a pliers to crimp the WINPLUS North America will make every effort to provide warranty service within a wires together to ensure good connection. reasonable period of time. SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SERVICE, 2.Q: What is the maximum working distance of the systern? PLEASE CALL TOLL FREE 1.866.294.9244 DURING REGULAR BUSINESS HOURS A: The system will work up to 30 feet depending on the amountof interference MONDAY THROUGH FRIDAY 9:00 AM TO 5:00PM between the camera and the monitor. In order to provide you with the proper warranty service, we request that you adhere to 3.0: Why is the image on the screen upside down? the following procedure: A: You can change the orientation of the image by pressing the rotate button 1.Include a copy of your sales receipt orbill of sale with your unit when it is returned for on the monitor until you get the desired image orientation. warranty service. 2. If it is necessary to return your product for service, please return it securely packed, 4.0: What is the purpose of the blue wire on the monitor wiring harness? preferably in the original shipping carton, and freight and insurance prepaid to the A: The blue wire is an optional wire that can be connected to another power following address: source preferably the reverselight wiring. This will act as a trigger to turn ATTN: WINPLUS BACKUP CAMERA RETURNS the monitor on as soon as the caris placed in reverse. 375 W. Apra St. Rancho Dominguez, CA 5.0: Why am I seeing a lot of interference and rolling lines when | use the 90220 system? * 3.Please include a detailed explanation of the problem you are having. , A:. Since the system is a wireless, other wireless devices can interfere with 4..If your productis found by WINPLUS North America to have a defect in material or the signal between the monitor and the camera. Mobile phones and other workmanship,—within the warranty period, it will be repaired or replaced at no charge and devices that use wireless technology can interfere with the system. Turn off returned to you prepaid. other wireless devices and you will notice the interference goes away. To get a better signal try the following: WINPLUS North America makes no other warranty of any kind aside from the limited *Move the monitor around the dashboard. express warranty stated herein. *Move antenna wire around and place in a location that has little interference. DISCLAIMER OF WARRANTIES, INCLUDING WARRANTY OF MERCHANTABILITY 6.0: When it is bright outside, is it normal for the screen to take awhile to show AND WARRANTY OF FITNESS FOR PARTICULAR PURPOSE: EXCEPT AS SPE— the actual image? CIFICALLY SET FORTH HEREIN, NO WARRANTY OR REPRESENTATION, A: Yes, the camera takes awhile to normalize and stabilize when it is bright EXPRESS OR IMPLIED, IS MADE AS TO THE VEHICLE BACK—UP CAMERA. outside. If the monitor takes more than 15 seconds to normalize and show rear EXCEPT AS EXPRESSLY SET FORTH HEREIN, WINPLUS NORTH AMERICA view image, please contact WINPLUS USA technical team. AND/OR ITS AFFILIATES EXPRESSLY DISCLAIMS, WITHOUT LIMITATION, ANY STATUTORY WARRANTIES AND ALL IMPLIED WARRANTIES, INCLUDING ANY IF YOU ARE EXPERIENCING ANY ISSUES WITH THE SYSTEM DURING IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR INSTALLATION OR OPERATION, DO NOT RETURN PRODUCT TO STORE. PURPOSE. CONTACT WINPLUS AT 1.866.294.9244 AND SPEAK TO OUR INSTALLATION SPECIALISTS. WINPLUS North America and/or its affiliates does not guarantee or promise that the user of our Vehicle Back—Up Camera will ngt be in an accident or otherwise not collide with an object and/or person. Our Vehicle Back—Up Cameras are not intended in any FCC & INDUSTRY CANADA way to be substitute for careful and cautious driving or for the consistent adherence to INFORMATION all applicable traffic laws and motor vehicle safety regulations. The Vehicle Back—Up Camera is not intended to be a substitute for rearview mirrors or for any other motor WARNING: Changes or modifications to this equipment not expressly approved vehicle equipment mandated by law. Even when properly installed, our Vehicle Back—Up by the party responsible for compliance could void the user‘s authority to oper— cameras have a limited field of vision and do not provide a comprehensive view of the ate the equipment. rear area of the vehicle. You should always look around outside your vehicle and use your mirrors to confirm rearward clearance and that your vehicle can back up safely. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a WINPLUS North America and/or its affiliates are not responsible for a user‘s intended or residential installation. This equipment generates, uses and can radiate radio actual use of the Vehicle Back—Up Camera. in no event shall WINPLUS North America frequency energy and, if not installed and used in accordance with the instruc— and/or its affiliates have any liability for any losses (whether direct or indirect, in contract, tions, may cause harmful interference to radio communications. tort or otherwise) incurred in connection with the Vehicle Back—Up Camera, including but However, there is no guarantee that interference with not occur in a particular installation. If this equipment does cause harmful interference to radio or not limited to damaged property, personal injury and/or loss oflife. Neither shall WIN— television reception, which can be determined by turning the equipmentoff and PLUS North America and/or its affiliates have any liability for any decision, action or on, the user is encouraged to try to correct the interference by one or more of inaction taken by any person in reliance on the Vehicle Back—Up Camera, or for any the following measures: delays, inaccuracies and/or errors in connection with the Vehicle Back—Up Camera and * Reorient or relocate the receiving antenna. its functioning. * Increase the separation between the equipment and receiver. * Connect the equipment into an outlet on a circuit different from that to which the receiver is needed. WINPLUS North America and/or its affiliates shall have no responsibility or liability for * Consult the dealer or an experienced radio/TV technician for helps. damage and/or injury resulting from accidents occurring with vehicles having the Vehicle Back—Up Camera installed, and WINPLUS North America and/orits affiliates,.the This device complies with Part 15 of the FCC Rules, and applicable Industry manufacturer, distributor and seller shall not beliable for any injury, loss or damage, Canada regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any incidental or consequential, arising out of the use or intended use of the product. interference received, including interference that may cause undesired operation TM & © 2007 WINPLUS of device. 20) ausmain perp on Mecoleiiieces nemzgptan The manufactureris not responsible for any radio or TV interference caused by /n ) wonc Kon6 Wisicheniernn pesad unauthorized modifications to this equipment. Such modifications could void the — fenntnetriopt, stt ifeee (n'mn\hm rak RHIRH mean user‘s authority to operate this equipment. wonel,, > EOM OhtotstrntabineGlmrt. inotomtenmentt pteciertiem Retnomes Ek U $s Wat/eaStec NAPT 10 B massoses en (For.Canada) Hae x coment on aemont Euiis atintofwnnessacon This Class A/B digital apparatus meets all requirements of the Canadian Interfer— on yerr is osunt an wntowiritsusicou ence — Causing Equipment Regulations. "Al RighResered 4 a

VEHICLE BACK—UP CAMERA w I R EL E S S 5 Y 5 T E M 3.5" LCD MONITOR USER‘S MANUAL USB slot to recharge ipod, ::r::\ F > (FOR AVDVDInput PLAYERS & GAME CONSOLE) mp3 players, digital cameras, phones, and more! NIAV (CHARGING ONLY) rowen OnOFF G& Aubpio vibeo @ ay 1O] RotaTe BRIGHTNESS @6 @k COLOR Plugs into 12V cigarette C socket for power =<Z JAudio Output __ Intolommntet = (HEADPHONEJACK) IMPORTANT SETTING MENU / FEATURES Thank you for purchasing the WINPLUS Vehicle Back—Up POWER ON / OFF @ Camera Wireless System. This back—up camera system was This power button is for power ON / OFF the LCD monitor. The monitor designed to give additional convenience when driving or will be connected to the wireless back—up camera automatically once you operating your vehicle. All parts needed to install and have powered the back—up camera. If you have not powered the back—up operate the system are included in this package. camera or there is no signal, the LCD monitorwill appears in BLUE/ TV screen noises. BLUE/ TV screen noises will turn OFF automatically if not For questions orinstallation issues regarding the Vehicle in use for 20 secands. (Please note that this is normal.) Back—Up Camera Wireless System, please contact WINPLUS at 866.294.9244 to speak to one of our installation specialist. ROTATE E) Vx xV *A ns A (rmtgggicinel Vx mmniion You can also contact us via email at info@WINPLUSusa.com. The rotate button will help change the orientation of the image on the LCD TELEVISION monitor. Adjust the orientation depending on the mounting option used. After the 3.5".LCD MONITOR has been on for a length of time, you will notice that the screen becomes warm. Please note that BricHtness 4y 7 i ~ this is normal. Sometimes the screen might have some tiny bright To adjust brightness, keep pressing the brightness button to the desired or dark spots. Please note that this is normal. brightness setting of the monitor. CAUTION COoLOoUR G To prevent scratches or damages to the LCD sereen, do not knock or rub the surface with sharp or hard objects. Clean the screen To adjust color, keep pressing the color button to the desired color setting with a soft cloth moistened with warm water and dry with a soft of the monitor. cloth. A mild soap may be used if the screen is extremely dirty. Do not use harsh or abrasive cleaners! sounps AWARNING © Fixed sound volume (Please note that this monitor will—not perform any NEVER USE 3.5" LCD MONITOR IF A PROBLEM SHOULD sounds by itself.) The volume function will only work with an external OCcurR. audio output. Abriormal operations such as smoke, strange odor, no image, no Allows you to plug in headphones for audio sound, excessive sound, damaged casing, elements, cables, penetration of liquids or foreign matter, etc. can cause a fire or USB SLOT electrical shock. In such case, immediately turn off the power switch and then disconnectthe power plug. After making sure that To recharge USB gadgets. (Please note that the USB slots is for charging the smoke or odor has stopped, contact your dealer. Never your gadgets only. ) attempt to make repairs yourself because this could be dangerous. 12V POWER PLUG LCD monitor power output. Use either the 12 volt adaptor or Hard Wired Do not insert liquids or foreign objects into the 3.5" monitor provided for LCD monitor power. Do not expose the monitor to rain or moisture. AV INPUT Do not place flower vases, pots, cups, cosmetics, liquids Composite AV input jack allows you to plug in other AV input from other such as water, etc on or around the Monitor. components. (Composite AV cable is included) Th & ©2007 WINPLUS WD =— Roies Ni Do not place metais, combustibles, etc on or around the Monitor. win—13107€c issc hh #1—1744 — ol—r0


Document Created: 2007-08-21 19:16:02
Document Modified: 2007-08-21 19:16:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC