(Short-Term Confidential) User Manual

FCC ID: VIYHRM1034

Users Manual

Download: PDF
FCCID_2439737

                                       User manual


Product: Bluetooth module
Model: HRM1034


For OEM integration only — device cannot be sold to general public.
Therefore we will not supply the User‘s manual, the installation manualis the official for OEM.


FCC ID: VIYHRM1034
IC: 7305A—HRM1034




MOperational Information
This module has been tested and found to comply with the limits for a Class B digital device
pursuant to Part15 of FCC rules. This module complies with Part15 subpart C of the FCC
rules. Customers should check Part15 subpart B compliance with their own final products
and conduct certification if needed.




MCaution
Any changes or modifications are not expressly approved by Hosiden responsible for
compliance could void the user‘s authority to operate the equipment.




M Requirement of Labeling
Please describe the following item on the final product including this module:


Contains Transmitter Module FCC ID: VIYHRM1034          or   Contains FCC ID: VIYHRM1034


Contains Transmitter Module IC: 7305A—HRM1034           or   Contains IC: 7305A—HRM1034




M Requirement of User‘s Manual Statement
"This transmitter must not be co—located or operated in conjunction with any other antenna
or transmitter."


The following statements must be described on the user manual of the host device of
this module;


      Federal Communication Commission Interference Statement

 This device complies with Part 15 of the FCC Rules. Operation is subject to the
 following two conditions: (1) This device may not cause harmful interference, and (2)
 this device must accept any interference received, including interference that may
 cause undesired operation.


 This equipment has been tested and found to comply with the limits for a Class B
 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
 provide reasonable protection against harmful interference in a residential
 installation. This equipment generates, uses and can radiate radio frequency energy
 and, if not installed and used in accordance with the instructions, may cause harmful
 interference to radio communications.        However, there is no guarantee that
 interference will not occur in a particular installation. If this equipment does cause
 harmful interference to radio or television reception, which can be determined by
 turning the equipment off and on, the user is encouraged to try to correct the
 interference by one of the following measures:


 - Reorient or relocate the receiving antenna.
 - Increase the separation between the equipment and receiver.
 - Connect the equipment into an outlet on a circuit different from that
    to which the receiver is connected.
 - Consult the dealer or an experienced radio/TV technician for help.


 FCC Caution: Any changes or modifications not expressly approved by the party
 responsible for compliance could void the user's authority to operate this equipment.
 This transmitter must not be co-located or operating in conjunction with any other
 antenna or transmitter.


  Radiation Exposure Statement:
  ・For Mobile Use
  This equipment complies with FCC radiation exposure limits set forth for an
  uncontrolled environment and meets the FCC radio frequency (RF) Exposure
  Guidelines. This equipment has very low levels of RF energy that it deemed to
  comply without maximum permissive exposure evaluation (MPE).


  ・For Portable Use
  This equipment complies with FCC radiation exposure limits set forth for an
  uncontrolled environment and meets the FCC radio frequency (RF) Exposure
  Guidelines. This equipment has very low levels of RF energy that are deemed to
  comply without testing of specific absorption rate(SAR).


This device is intended only for OEM integrators under the following
conditions:


  1) The transmitter module may not be co-located with any other transmitter or
     antenna.


  As long as 1 condition above are met, further transmitter test will not be required.
  However, the OEM integrator is still responsible for testing their end-product for any
  additional compliance requirements required with this module installed


  IMPORTANT NOTE: In the event that these conditions can not be met (for example
  certain laptop configurations or co-location with another transmitter), then the FCC
  authorization is no longer considered valid and the FCC ID can not be used on the
  final product. In these circumstances, the OEM integrator will be responsible for
  re-evaluating the end product (including the transmitter) and obtaining a separate
  FCC authorization.


  Manual Information To the End User
  The OEM integrator has to be aware not to provide information to the end
  user regarding how to install or remove this RF module in the user’s
  manual of the end product which integrates this module.
  The end user manual shall include all required regulatory information/warning as
  show in this manual.


                                   Industry Canada Statement

This device complies with RSS-standard(s) of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation.


Ce dispositif est conforme à la norme CNR-d'Industrie Canada applicable aux appareils
radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1)
le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter
tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.


Radiation Exposure Statement/ Déclaration d'exposition aux radiations:


・For Mobile Use
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that it deemed to comply without maximum
permissive exposure evaluation (MPE).


Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un
environnement non contrôlé et respecte les règles d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui
est considérée conforme sans évaluation de l’exposition maximale autorisée.


・For Portable Use
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that are deemed to comply without testing of
specific absorption rate (SAR).


Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un
environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques
(RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée
conforme sans évaluation du débit d’absorption spécifique (DAS).


This device is intended only for OEM integrators under the following conditions:
(For module device use)
1) The transmitter module may not be co-located with any other transmitter or antenna.


As long as 1 condition above are met, further transmitter test will not be required. However,
the OEM integrator is still responsible for testing their end-product for any additional
compliance requirements required with this module installed.


Cet appareil est conçu uniquement pour les intégrateurs OEM dans les
conditions suivantes: (Pour utilisation de dispositif module)
1) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.


Tant que les 1 condition ci-dessus sont remplies, des essais supplémentaires sur l'émetteur
ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais
sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce
module installé.


IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations
or co-location with another transmitter), then the Canada authorization is no longer
considered valid and the IC ID can not be used on the final product. In these circumstances,
the OEM integrator will be responsible for re-evaluating the end product (including the
transmitter) and obtaining a separate Canada authorization.


NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines
configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur),
l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé
sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le
produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada.


End Product Labeling

The final end product must be labeled in a visible area with the following: “Contains IC:
7305A-HRM1034”.


Plaque signalétique du produit final

Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient
des IC: 7305A-HRM1034".


Manual Information To the End User

The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user’s manual of the end product which
integrates this module.
The end user manual shall include all required regulatory information/warning as show in
this manual.


Manuel d'information à l'utilisateur final

L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final
quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du
produit final qui intègre ce module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et
avertissements comme indiqué dans ce manuel.


                            Product Specification

1. BLUETOOTH SPECIFICATIONS
   BT core spec version:     version 4.1
   Supported profiles:       HFP, HSP, A2DP, AVRCP, GAVDP
   Operation channels:       2402 + N MHz (N=0,1,2,…78)
   Output power level:       4dBm typical
   Sensitivity:              -70dBm at BER0.1%




2. DC ELECTRICAL CHARACTERISTICS
   Nominal input voltage:    3.7V



Document Created: 2014-10-27 10:21:13
Document Modified: 2014-10-27 10:21:13

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC