RF Exposure Report

FCC ID: VIP-DVA6

RF Exposure Info

Download: PDF
FCCID_2382089

RF EXPOSURE EVALUATION

According to FCC 1.1310: The criteria listed in the following table shall
be used to evaluate the environment impact of human exposure to
radio frequency(RF) Radiation as specified in §1.1307(b)


FCC ID:VIP-DVA6

EUT Specification
EUT
                                            Car Multimedia Receiver
Frequency             band       WLAN: 2.412GHz ~ 2.462GHz
(Operating)                      WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz
                                 WLAN: 5.745GHz ~ 5825GHz
                                 Others
Device category                 Portable (<20cm separation)
                                Mobile (>20cm separation)
                                Others ___
Exposure classification         Occupational/Controlled exposure (S = 5mW/cm2)
                                General Population/Uncontrolled exposure
                              (S=1mW/cm2)
Antenna diversity                Single antenna
                                 Multiple antennas
                                 Tx diversity
                                 Rx diversity
                                 Tx/Rx diversity
Max. output power             -0.54dBm(0.883mW)
Antenna gain (Max)            0 dBi
Evaluation applied              MPE Evaluation
                                SAR Evaluation

Limits for Maximum Permissible Exposure(MPE)

  Frequency      Electric Field Magnetic Field          Power               Average
 Range(MHz)     Strength(V/m) Strength(A/m)       Density(mW/cm2)            Time
                 (A) Limits for Occupational/Control Exposures
   300-1500            --               --              F/300                 6
 1500-100000           --               --                 5                  6
            (B) Limits for General Population/Uncontrol Exposures
    300-1500             --             --              F/1500                6
  1500-100000            --             --                 1                  30


 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2)

Where
Pd= Power density in mW/cm2
Pout=output power to antenna in Mw
G= gain of antenna in linear scale
Pi=3.1416
R= distance between observation point and center of the radiator in cm
Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the
antenna and total power input to the antenna, through the calculation,
we will know the distance where the MPE limit is reached.


Measurement Result

                                                             Power         Power
  Channel         Output       Antenna          Antenna
                                                            density at     density
 Frequency      Peak power      Gain             Gain
                                                           20cm (mW/        Limits
   (MHz)          (mW)          (dBi)          (numeric)
                                                              cm2 )      (mW/cm2 )
    2402           0.883             0              1      0.0001757          1
    2441           0.793             0              1      0.0001578          1
    2480           0.697             0              1      0.0001387          1
    2402           0.661             0              1      0.0001315          1
    2441           0.583             0              1      0.0001160          1
    2480           0.502             0              1      0.0000999          1
    2402           0.701             0              1      0.0001395          1
    2441           0.610             0              1      0.0001214          1
    2480           0.528             0              1      0.0001050          1

Signature:




Print:   Sam Lv
Title: Manager
Company: DONGGUAN EMTEK CO., LTD.
Address: No.281, Guantai Road, Nancheng District,
        Dongguan, Guangdong, China
Date: 2014-09-02



Document Created: 2014-09-02 15:12:10
Document Modified: 2014-09-02 15:12:10

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC