Test Report

FCC ID: VECHB190

Test Report

Download: PDF
FCCID_1017253

ST ELECTRONICS (SATCOM & SENSOR SYSTEMS) PTE LTD. MICROWAVE MOTION SENSOR MODULE Model: HB190 15 October 2008 Report No.: SL08091801-STE-001 (15.245) (This report supersedes NONE) Modifications made to the product : None This Test Report is Issued Under the Authority of: Dan Coronia Leslie Bai Test Engineer Engineering Reviewer This test report may be reproduced in full only. Test result presented in this test report is applicable to the representative sample only.

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 2 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: NVLAP Lab Code: 200729-0

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 3 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: A2LA Certificate Number: 2742.01

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 4 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: FCC Registration No. 783147

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 5 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: Industry of Canada Registration No. 4842-1

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 6 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: Japan VCCI Registration No. 2195

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 7 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: Japan RF Technologies Accreditation No. MRF050927

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 8 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: Korea MIC Lab Code: KR0032

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 9 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: Korea CAB ID: US0160

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 10 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: Taiwan BSMI Accreditation No. SL2-IN-E-1130R

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 11 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: Taiwan NCC CAB ID: US0160

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 12 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: Mexico NOM Recognition

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 13 of 34 To FCC 15.245 2008 www.siemic.com SIEMIC ACREDITATION DETAILS: Hong Kong OFTA Recognition No. D23/16V

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 14 of 34 To FCC 15.245 2008 www.siemic.com This page has been left blank intentionally.

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 15 of 34 To FCC 15.245 2008 www.siemic.com CONTENTS 1 EXECUTIVE SUMMARY & EUT INFORMATION...................................................................................................................... 17 2 TECHNICAL DETAILS............................................................................................................................................................... 18 3 MODIFICATION ......................................................................................................................................................................... 19 4 TEST SUMMARY....................................................................................................................................................................... 20 5 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS .............................................................................................. 21 ANNEX A. TEST INSTRUMENT & METHOD ..................................................................................................................................... 26 ANNEX B EUT AND TEST SETUP PHOTOGRAPHS....................................................................................................................... 30 ANNEX C. TEST SETUP AND SUPPORTING EQUIPMENT.............................................................................................................. 30 ANNEX D USER MANUAL, BLOCK & CIRCUIT DIAGRAM ............................................................................................................. 34

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 16 of 34 To FCC 15.245 2008 www.siemic.com This page has been left blank intentionally.

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 17 of 34 To FCC 15.245 2008 www.siemic.com 1 Executive Summary & EUT information The purpose of this test programme was to demonstrate compliance of the ST Electronics (Satcom & Sensor Systems) PTE LTD. Model: HB190 against the current Stipulated Standards. The HB190 Microwave Motion Sensor Module have demonstrated compliance with the FCC 15.245 2008. EUT Information EUT : The HB 190 Microwave Motion Sensor is an X-Band Bi-Static Doppler transceiver Description module that makes use of Doppler Effect Principle to detect motion. These modules are designed for movement detection, like intruder alarms, occupancy modules and other innovative ideas. The module consists of Dielectric Resonator Oscillator (DRO), microwave mixer and Dipole antenna. Model No : HB190 Serial No : 30808180001 Input Power : 5 VDC Classification Per Stipulated : Field Disturbance Sensor / Device Test Standard

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 18 of 34 To FCC 15.245 2008 www.siemic.com 2 TECHNICAL DETAILS Compliance testing of Microwave Motion Sensor Module with stipulated standard Purpose Applicant / Client ST Electronics (Satcom & Sensor Systems) PTE LTD. ST Electronics (Satcom & Sensor Systems) PTE LTD. Manufacturer 100, Jurong East St. 21, Level 4, ST Electronics Jurong East Building Singapore 6069602 Laboratory performing the tests SIEMIC Laboratories Test report reference number SL08091801-STE-001 (15.245) Date EUT received 26 September 2008 Standard applied FCC 15.245 2008 Dates of test (from – to) 13-14 October 2008 No of Units: 2 Equipment Category: FDS Trade Name: ST Electronics (Satcom & Sensor Systems) PTE LTD. Model : HB190 RF Operating Frequency (ies) 10.525 GHz Number of Channels : 1 Modulation : No Modulation FCC ID : VECHB190 IC ID : N/A

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 19 of 34 To FCC 15.245 2008 www.siemic.com 3 MODIFICATION NONE

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 20 of 34 To FCC 15.245 2008 www.siemic.com 4 TEST SUMMARY The product was tested in accordance with the following specifications. All testing has been performed according to below product classification: Field Disturbance Sensor / Device Test Results Summary Test Standard Description Pass / Fail 47 CFR Part 15.247: 2008 RSS 210 Issue 7: 2007 15.203 Antenna Requirement Pass 15.207(a) AC Line Conducted Emissions Voltage N/A 15.245 (b) Radiated Emissions Carrier Frequency Pass 15.245(b) (1) Radiated Emissions Carrier Harmonics Pass 15.245(b)(3) / 15.209 Out-of-Band Radiated Emissions Pass ANSI C63.4: 2003/ RSS-Gen Issue 2: 2007 PS: All measurement uncertainties are not taken into consideration for all presented test result.

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 21 of 34 To FCC 15.245 2008 www.siemic.com 5 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS 5.1 Antenna Requirement Requirement(s): 47 CFR §15.203 An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. Antenna requirement must meet at least one of the following: a) Antenna must be permanently attached to the device. b) Antenna must use a unique type of connector to attach to the device. c) Device must be professionally installed. Installer shall be responsible for ensuring that the correct antenna is employed with the device. 1) The EUT antenna is attached permanently to the device which meets the requirement.

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 22 of 34 To FCC 15.245 2008 www.siemic.com 5.2 Conducted Emissions Voltage Requirement: Conducted limit (dBμV) Frequency of emission (MHz) Quasi-peak Average 0.15–0.5 66 to 56* 56 to 46* 0.5–5 56 46 5–30 60 50 *Decreases with the logarithm of the frequency. Procedures: 1. All possible modes of operation were investigated. Only the 6 worst case emissions measured, using the correct CISPR and Average detectors, are reported. All other emissions were relatively insignificant. 2. A "-ve" margin indicates a PASS as it refers to the margin present below the limit line at the particular frequency. 3. Conducted Emissions Measurement Uncertainty All test measurements carried out are traceable to national standards. The uncertainty of the measurement at a confidence level of approximately 95% (in the case where distributions are normal), with a coverage factor of 2, in the range 9kHz – 30MHz (Average & Quasi-peak) is ±3.5dB. 4. Environmental Conditions Temperature 23ºC - 28ºC Relative Humidity 50% Atmospheric Pressure 1019mbar Test Date : February 28 & 29 to March 03, 2008 Tested By :Dan Coronia Results: N/A NOTE: The conducted emission test was not performed because the EUT has no provisions for connection to the public utility ac power lines to operate the EUT. The EUT is just operated from the external battery

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 23 of 34 To FCC 15.245 2008 www.siemic.com 5.3 Radiated Spurious Emission (Out-of-Band) Test Results Requirement(s): 47 CFR §15.209; 47 CFR §15.245 (b) (1) Procedures: Radiated emissions were measured according to ANSI C63.4. The EUT was set to transmit at the highest output power. The EUT was set 3 meter away from the measuring antenna. The Log Periodic Antenna was positioned 1 meter above the ground from the centre of the loop. The measuring bandwidth was set to 10 kHz. (Note: During testing the receive antenna was raise from 1~4 meters to maximize the emission from the EUT.) 1. All possible modes of operation were investigated. Only the 6 worst case emissions measured, using the correct CISPR detectors, are reported. All other emissions were relatively insignificant. 2. A "-ve" margin indicates a PASS as it refers to the margin present below the limit line at the particular frequency. 3. Radiated Emissions Measurement Uncertainty All test measurements carried out are traceable to national standards. The uncertainty of the measurement at a confidence level of approximately 95% (in the case where distributions are normal), with a coverage factor of 2, in the range 30MHz – 1GHz (QP only @ 3m & 10m) is +5.6dB/-4.5dB (for EUTs < 0.5m X 0.5m X 0.5m). 4. Environmental Conditions Temperature 28oC Relative Humidity 50% Atmospheric Pressure 1019mbar Test date : October 13 to 14, 2008 Tested By : Dan Coronia 5.3.1 Test Result: Pass

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 24 of 34 To FCC 15.245 2008 www.siemic.com Test result complying for FCC 15.245 (b) (3) & 15.209 30MHz ~1000MHz Turntable Frequency Quasi-Peak Antenna height Limit Margin position Polarity (MHz) (dBµV/m) @ 3m (cm) (dBµV/m) (dB) (deg) 845.86 36.33 296.00 272.00 V 46.00 -9.67 824.40 36.13 101.00 355.00 V 46.00 -9.87 832.36 36.01 400.00 304.00 V 46.00 -9.99 925.19 38.24 393.00 324.00 H 46.00 -7.76 959.69 38.15 220.00 98.00 V 46.00 -7.85 940.64 37.86 200.00 351.00 V 46.00 -8.14

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 25 of 34 To FCC 15.245 2008 www.siemic.com 5.4 Radiated Fundamental & Spurious Emissions Requirement(s): 47 CFR §15.209; 47 CFR §15.245 (b) (1) Procedures: Radiated emissions were measured according to ANSI C63.4. The EUT was set to transmit at the highest output power. The EUT was set 3 meter away from the measuring antenna. The Horn Antenna (1-18GHz) was positioned 1 meter above the ground from the centre of the loop to measure the fundamental and 18-40GHz for Harmonics spurious emission (Note: During testing the receive antenna was raise from 1~4 meters to maximize the emission from the EUT.) The limit is converted from microvolts/meter to decibel microvolts/meter. Sample Calculation: Corrected Amplitude = Raw Amplitude (dBµV/m) + ACF (dB) + Cable Loss (dB) – Distance Correction Factor. 5.4.1 Test Result: Pass Radiated Emissions Field Strength of Fundamental Raw EUT Final Antenna Pre Ant .Corr. Cable Limit Frequency Azimuth Height Amp. Field Delta Detector Polarity Amp. Factor Loss @ 3m (GHz) (Degrees) (m) @ 3m Strength (dBuV/m) (pk/avg) (H/V) (dB) (dB) (dB) (dBuV/m) (dBuV) (dBuV/m) 10.525 180 V 1.5 91.26 32.8 40.8 6.905 106.14 148.0 -41.87 Peak 10.525 78 H 1.1 78.35 32.8 40.8 6.905 93.23 148.0 -54.78 Peak 10.525 180 V 1.6 90.68 32.8 40.8 6.905 105.56 128.0 -22.45 Ave 10.525 78 H 1.1 77.95 32.8 40.8 6.905 92.83 128.0 -35.18 Ave Radiated Emissions Field Strength of Harmonics Raw EUT Final Antenna Pre Ant .Corr. Cable Limit Frequency Azimuth Height Amp. Field Delta Detector Polarity Amp. Factor Loss @ 3m (GHz) (Degrees) (m) @ 3m Strength (dBuV/m) (pk/avg) (H/V) (dB) (dB) (dB) (dBuV/m) (dBuV) (dBuV/m) 21.050 160 V 1.0 43.13 29.4 38.4 18.33 70.46 97.5 -27.04 Peak 21.050 178 H 1.3 41.62 29.4 38.4 18.33 68.95 97.5 -28.55 Peak 21.050 160 V 1.0 28.07 29.4 38.4 18.33 55.40 77.5 -22.1 Ave 21.050 178 H 1.3 28.07 29.4 38.4 18.33 55.40 77.5 -22.1 Ave 31.575 140 V 1.3 43.34 28.2 36.5 23.10 74.74 97.5 -22.76 Peak 31.575 143 H 1.0 42.05 28.2 36.5 23.10 73.45 97.5 -24.05 Peak 31.575 140 V 1.3 35.33 28.2 36.5 23.10 66.73 77.5 -10.77 Ave 31.575 143 H 1.0 32.34 28.2 36.5 23.10 63.74 77.5 -13.76 Ave Note: Emission was scanned up to 100GHz; no emissions were detected above the noise floor which was at least 20 dB below the specification limit.

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 26 of 34 To FCC 15.245 2008 www.siemic.com Annex A. TEST INSTRUMENT & METHOD Annex A.i. TEST INSTRUMENTATION & GENERAL PROCEDURES Instrument Model Serial # Calibration Due AC Conducted Emissions R&S EMI Test Receiver ESIB40 100179 04/25/2009 R&S LISN ESH2-Z5 861741/013 04/24/2009 CHASE LISN MN2050B 1018 04/24/2009 Radiated Emissions R&S EMI Test Receiver ESIB40 100179 04/25/2009 Com Power Corp Horn Antenna (18GHz to 40GHz) AH-840 101013 03/19/2010 EMCO Horn Antenna (1-18GHz) 3115 10SL0059 04/10/2008 Sunol Sciences, Inc. antenna (30MHz~2GHz) JB1 A030702 10/04/2009 Wiltron Signal Generator 68169B 973407 04/25/2009 (10MHz to 40GHz) Com Power Preamplifier PA-840 181250 05/21/2009 (18GHz to 40GHz) HP Preamplifier 8449B 3008A00715 04/24/2009 (1-18GHz) HP Preamplifier 8447F 1937A01160 04/24/2009 (0.1-1300MHz) Millitech, External Mixer MHB-06-RD3A0 9259 N/A MILITECH, External Mixer (Above 40GHz) MHB-06-RD3AO 9259 N/A MILITGECH, Horn Antenna (above 40GHz) WT-KaD WT28-6 N/A

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 27 of 34 To FCC 15.245 2008 www.siemic.com Annex A.ii. CONDUCTED EMISSIONS TEST DESCRIPTION Test Set-up 1. The EUT and supporting equipment were set up in accordance with the requirements of the standard on top of a 1.5m x 1m x 0.8m high, non-metallic table, as shown in Annex B. 2. The power supply for the EUT was fed through a 50Ω/50μH EUT LISN, connected to filtered mains. 3. The RF OUT of the EUT LISN was connected to the EMI test receiver via a low-loss coaxial cable. 4. All other supporting equipments were powered separately from another main supply. Test Method 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. A scan was made on the NEUTRAL line (for AC mains) or Earth line (for DC power) over the required frequency range using an EMI test receiver. 3. High peaks, relative to the limit line, were then selected. 4. The EMI test receiver was then tuned to the selected frequencies and the necessary measurements made with a receiver bandwidth setting of 10 KHz. For FCC tests, only Quasi-peak measurements were made; while for CISPR/EN tests, both Quasi-peak and Average measurements were made. 5. Steps 2 to 4 were then repeated for the LIVE line (for AC mains) or DC line (for DC power). Sample Calculation Example At 20 MHz limit = 250 μV = 47.96 dBμV Transducer factor of LISN, pulse limiter & cable loss at 20 MHz = 11.20 dB Q-P reading obtained directly from EMI Receiver = 40.00 dBμV (Calibrated for system losses) Therefore, Q-P margin = 47.96 – 40.00 = 7.96 i.e. 7.96 dB below limit

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 28 of 34 To FCC 15.245 2008 www.siemic.com Annex A. iii RADIATED EMISSIONS TEST DESCRIPTION EUT Characterisation EUT characterisation, over the frequency range from 30MHz to 10th Harmonic , was done in order to minimise radiated emissions testing time while still maintaining high confidence in the test results. The EUT was placed in the chamber, at a height of about 0.8m on a turntable. Its radiated emissions frequency profile was observed, using a spectrum analyzer /receiver with the appropriate broadband antenna placed 3m away from the EUT. Radiated emissions from the EUT were maximised by rotating the turntable manually, changing the antenna polarisation and manipulating the EUT cables while observing the frequency profile on the spectrum analyzer / receiver. Frequency points at which maximum emissions occurred, clock frequencies and operating frequencies were then noted for the formal radiated emissions test at the Open Area Test Site (OATS). Test Set-up 1. The EUT and supporting equipment were set up in accordance with the requirements of the standard on top of a 1.5m X 1.0m X 0.8m high, non-metallic table. 2. The filtered power supply for the EUT and supporting equipment were tapped from the appropriate power sockets located on the turntable. 3. The relevant broadband antenna was set at the required test distance away from the EUT and supporting equipment boundary. Ant. Tower 1-4m Variable 3m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 29 of 34 To FCC 15.245 2008 www.siemic.com Test Method The following procedure was performed to determine the maximum emission axis of EUT: 1. With the receiving antenna is H polarization, rotate the EUT in turns with three orthogonal axes to determine the axis of maximum emission. 2. With the receiving antenna is V polarization, rotate the EUT in turns with three orthogonal axes to determine the axis of maximum emission. 3. Compare the results derived from above two steps. So, the axis of maximum emission from EUT was determined and the configuration was used to perform the final measurement. Final Radiated Emission Measurement 1. Setup the configuration according to figure 1. Turn on EUT and make sure that it is in normal function. 2. For emission frequencies measured below 1 GHz, a pre-scan is performed in a shielded chamber to determine the accurate frequencies of higher emissions will be checked on a open test site. As the same purpose, for emission frequencies measured above 1 GHz, a pre-scan also be performed with a 1 meter measuring distance before final test. 3. For emission frequencies measured below and above 1 GHz, set the spectrum analyzer on a 100 kHz and 1 MHz resolution bandwidth respectively for each frequency measured in step 2. 4. The search antenna is to be raised and lowered over a range from 1 to 4 meters in horizontally polarized orientation. Position the highness when the highest value is indicated on spectrum analyzer, then change the orientation of EUT on test table over a range from 0。 to 360。with a speed as slow as possible, and keep the azimuth that highest emission is indicated on the spectrum analyzer. Vary the antenna position again and record the highest value as a final reading. 5. Repeat step 4 until all frequencies need to be measured were complete. 6. Repeat step 5 with search antenna in vertical polarized orientations. During the radiated emission test, the Spectrum Analyzer was set with the following configurations: Frequency Band (MHz) Function Resolution bandwidth Video Bandwidth 30 to 1000 Peak 100 kHz 100 kHz Peak 1 MHz 1 MHz Above 1000 Average 1 MHz 10 Hz Sample Calculation Example The field strength is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain (if any) from the measured reading. For the limit is employed average value, therefore the peak value can be transferred to average value by subtracting the duty factor. The basic equation with a sample calculation is as follows: Peak = Reading + Corrected Factor where Corr. Factor = Antenna Factor + Cable Factor - Amplifier Gain (if any) And the average value is Average = Peak Value + Duty Factor or Set RBW = 1MHz, VBW = 10Hz. Note : If the measured frequencies are fall in the restricted frequency band, the limit employed must be quasi peak value when frequencies are below or equal to 1 GHz. And the measuring instrument is set to quasi peak detector function.

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 30 of 34 To FCC 15.245 2008 www.siemic.com Annex B EUT AND TEST SETUP PHOTOGRAPHS Please see the attachment Annex C. TEST SETUP AND SUPPORTING EQUIPMENT EUT TEST CONDITIONS Annex C. i. SUPPORTING EQUIPMENT DESCRIPTION The following is a description of supporting equipment and details of cables used with the EUT. Equipment Description Cable Description Model & Serial Number (Including Brand Name) (List Length, Type & Purpose) Topward Electric Instrument Co., Ltd. Model: TPS-2000 N/A Linear AC/DC Power Supply SN: 920035 NOTE: No special supporting equipment are used or needed during testing to achieve compliance.

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 31 of 34 To FCC 15.245 2008 www.siemic.com Block Configuration Diagram for Radiated Emission LISN 1, LISN 1, 120V@60Hz, 120V@60Hz, Power Input Power Input DC Power Supply EUT Wooden table, 80cm above ground plane 3 Meter Receiving Antenna

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 32 of 34 To FCC 15.245 2008 www.siemic.com Block Configuration Diagram for Conducted Emission LISN 1, LISN 1, 120V@60Hz, 120V@60Hz, Power Input Power Input AC/DC Power Adaptor EUT Wooden table, 80cm above ground plane NOTE: The conducted emission test was not performed because the EUT has no provisions for connection to the public utility ac power lines to operate the EUT. The EUT is just operated from the external battery or equivalent.

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 33 of 34 To FCC 15.245 2008 www.siemic.com Annex C.ii. EUT OPERATING CONDITIONS The following is the description of how the EUT is exercised during testing. Test Description Of Operation Emissions Testing The EUT was controlled by itself. Others Testing The EUT was controlled by itself.

Serial# SL08091801-STE-001 (15.245) Title: RF Test Report of ST Electronics (Satcom & Sensor Systems) PTE LTD. Issue Date 15 October 2008 Model : HB190 Page 34 of 34 To FCC 15.245 2008 www.siemic.com Annex D USER MANUAL, BLOCK & CIRCUIT DIAGRAM Please see attachment


Document Created: 2008-10-17 10:57:49
Document Modified: 2008-10-17 10:57:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC