05 User Manual

FCC ID: VBU-RDFLB03H

Users Manual

Download: PDF
FCCID_4235171

            User Manual

Product Name Contactless Smart Card Reader

Model RDFL-B03H/ RDFL-B03BLE/ RDFL-B03BLES




                 Ver.1.0




                Apr. 8, 2019




         MIWA LOCK CO., LTD.


                                                                                             User Manual


1. APPLICATIONS

  This manual explains the contactless smart card readers "RDFL - B03H", "RDFL - B03 BLE" and
RDFL-B03BLES which are readers exclusively for the card key of the hotel card lock "ALV2". These will
manage guest rooms and hotel facilities.


Model:RDFL-B03H ・・・ Only Mifare Card can be used
Model:RDFL-B03BLE ・・・ Mifare Card and Bluetooth Low Enagy (BLE) can be used
Model:RDFL-B03BLES ・・・ Mifare Card and Bluetooth Low Enagy (BLE) can be used with Diffuse
                                reflection photoelectric sensor


2. SUMMARY

 2-1.Contactless Smart Card Reader


   (1) It is a card reader dedicated to the entrance of the hotel card lock "ALV2" which reads and
       outputs Mifare card or smartphone authentication key.
   (2) When using a contactless smart card or a smartphone authentication key issued from an issuing
       device installed in the front desk, various information such as a hotel code and a room number
       are collated with the stored data. If it is confirmed that the card is valid, it outputs a signal to the
       external system.


3. GENERAL SPECIFICATIONS

                                           Specifications
                                   RDFL-B03H         (Mifare Type)
                                   RDFL-B03BLE        (Mifare and BLE Type)
     Model
                                   RDFL-B03BLES         (Mifare and BLE Type) with Diffuse
                                   reflection photoelectric sensor
                                   Panel
                                   116(W) , 120(H) , 7(D)
     Dimensions                    Main body
                                   90(W) , 70(H) , 35(D)
     Weight                        250g approximately
                                   Panel : Acrylic
     Materials
                                   Main body : ABS resin
     Power supply                  supplied from a controller
     Operation temperature         -10~50℃
     Safekeeping temperature       -10~60℃
     Operation humidity            20~90%RH Without condensation
     Target card                   ISO14443 TYPE A (MIFARE)



MIWA LOCK CO., LTD.                                                                                          2


                                                                                           User Manual




4. Detail of function

(1) Bring a card key or smartphone close to the contactless smart card reader.
(2) The contactless smart card reader reads the key data and if the data accords with the database,
    signal is sent the external system.


    Collation data:
     1) Hotel code
     2) Validity of the card key or authentication key. (from check-in time to check-out time)
     3) Room number of the key.


(3)If the card key is valid, the LED lights blue. In case of invalid card key, the LED lights red.




MIWA LOCK CO., LTD.                                                                                      3


                                                                            User Manual


5. Regulatory Compliance


Caution:
 Any changes or modifications not expressly approved by the party responsible for
 product compliance could void the user's authority to operate the unit.


5-1. USA-Federal Communications Commission (FCC)
 NOTE: This equipment has been tested and found to comply with the limits for a
 Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
 designed to provide reasonable protection against harmful interference in a
 residential installation. This equipment generates, uses and can radiate radio
 frequency energy and, if not installed and used in accordance with the instructions,
 may cause harmful interference to radio communications. However, there is no
 guarantee that interference will not occur in a particular installation. If this equipment
 does cause harmful interference to radio or television reception, which can be
 determined by turning the equipment off and on, the user is encouraged to try to
 correct the interference by one or more of the following measures:
 — Reorient or relocate the receiving antenna.
 — Increase the separation between the equipment and receiver.
 — Connect the equipment into an outlet on a circuit different from that to which the
   receiver is connected.
 — Consult the dealer or an experienced radio/TV technician for help.


 This unit complies with Part 15 of the FCC Rules. Operation is subject to the
 following two conditions:
 (1) This unit may not cause harmful interference, and
 (2) This unit must accept any interference received, including interference that may
     cause undesired operation.

・Responsible Party – U.S. Contact Information
  MIWA Irvine, CA Office
  9272 Jeronimo Road, Suite 119, Irvine, CA 92618
  Telephone:1-949-328-5280 / FAX:1-949-328-5281




MIWA LOCK CO., LTD.                                                                       4


                                                                          User Manual




5.2. Innovation, Science and Economic Development Canada (ISED)
 This device contains licence-exempt transmitter(s)/receiver(s) that comply with
 Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
 Operation is subject to the following two conditions:
 (1)This device may not cause interference.
 (2)This device must accept any interference, including interference that may cause
    undesired operation of the device.


 L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
 conforme aux CNR d’Innovation, Sciences et Développement économique Canada
 applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
 deux conditions suivantes :
 (1)L’appareil ne doit pas produire de brouillage;
 (2)L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
     est susceptible d’en compromettre le fonctionnement.



6. Labeling
MIWA LOCK contactless smart card reader is labelled below.
・RDFL-B03H(Mifare type)
 FCC ID:VBU-RDFLB03H
 IC:21683-RDFLB03H


・RDFL-B03BLE and RDFL-B03BLES(Mifare and BLE type)
 FCC ID:VBU-RDFLB03H
 IC:21683-RDFLB03H
 Contains FCC ID: VPYLBZY
 Contains IC: 772C-LBZY




MIWA LOCK CO., LTD.                                                                     5



Document Created: 2019-04-11 11:47:45
Document Modified: 2019-04-11 11:47:45

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC