MPE test report

FCC ID: VA5CMT248-X1MAX

RF Exposure Info

Download: PDF
FCCID_4264471

FCC ID : VA5CMT248-X1MAX Standalone SAR test exclusion considerations March 25, 2019 - Device category = Portable device Mobile device - Transmitting mode = Single Transmitting Simultaneous Transmitting - Max. transmitting frequency = 1909.3 MHz - Min. test separation distance = 200 mm - Max. Antenna Gain = 3.32 dBi - Max. power with turn-up tolerance = 24.00 dBm = 251.2 mW ( Typical Power = Max. 24.00 dBm ) Note. LTE Cat.M1 Band 2 KDB 447498 D01 clasue 4.3.1 Step 2-2) SAR test exclusion thresholds for 1500MHz to 6GHz at test separationn distances > 50 mm [ Threshold at 50 mm + ( test separation distance - 50 mm ) X 10 ] mW = [ 1.74 + ( 200mm - 50mm X 10 ) ] = 1501.7 Note. The calculation result was rounded to one decimal place for comparison. → SAR evaluation for general population exposure conditions by measurement or numerical simulation is not required. Maximum Permissible Exposure(MPE) evaluation for mobile device S = Maximum power density G = Numeric power gain of the antenna S= P G / (4 R 2 π ) , ㎽/㎝ 2 P = Maximum power with turn-up tolerance R = Distance from transmitting antenna 2 = 0.107337 ㎽/㎝ Conclusion: The exposure condition of this device is compliant with FCC rules. 2 The limit for maximum permissible exposure = 1.000000 ㎽/㎝ Copyright ⓒ 2018, UL Korea, Ltd.

FCC ID : VA5CMT248-X1MAX Standalone SAR test exclusion considerations March 25, 2019 - Device category = Portable device Mobile device - Transmitting mode = Single Transmitting Simultaneous Transmitting - Max. transmitting frequency = 1754.3 MHz - Min. test separation distance = 200 mm - Max. Antenna Gain = 3.83 dBi - Max. power with turn-up tolerance = 23.00 dBm = 199.6 mW ( Typical Power = Max. 23.00 dBm ) Note. LTE Cat.M1 Band 4 KDB 447498 D01 clasue 4.3.1 Step 2-2) SAR test exclusion thresholds for 1500MHz to 6GHz at test separationn distances > 50 mm [ Threshold at 50 mm + ( test separation distance - 50 mm ) X 10 ] mW = [ 1.32 + ( 200mm - 50mm X 10 ) ] = 1501.3 Note. The calculation result was rounded to one decimal place for comparison. → SAR evaluation for general population exposure conditions by measurement or numerical simulation is not required. Maximum Permissible Exposure(MPE) evaluation for mobile device S = Maximum power density G = Numeric power gain of the antenna S= P G / (4 R 2 π ) , ㎽/㎝ 2 P = Maximum power with turn-up tolerance R = Distance from transmitting antenna 2 = 0.095916 ㎽/㎝ Conclusion: The exposure condition of this device is compliant with FCC rules. 2 The limit for maximum permissible exposure = 1.000000 ㎽/㎝ Copyright ⓒ 2018, UL Korea, Ltd.

FCC ID : VA5CMT248-X1MAX Standalone SAR test exclusion considerations March 25, 2019 - Device category = Portable device Mobile device - Transmitting mode = Single Transmitting Simultaneous Transmitting - Max. transmitting frequency = 715.3 MHz - Min. test separation distance = 200 mm - Max. Antenna Gain = -1.16 dBi - Max. power with turn-up tolerance = 24.00 dBm = 251.2 mW ( Typical Power = Max. 24.00 dBm ) Note. LTE Cat.M1 Band 12 KDB 447498 D01 clasue 4.3.1 Step 2-1) SAR test exclusion thresholds for 100MHz to 1500MHz at test separationn distances > 50 mm [ Threshold at 50 mm + ( test separation distance - 50 mm ) X ( f(MHz ) / 150 ) ] mW = [ 1.06 + ( 200mm - 50mm ) X ( 715.3MHz / 150 ) ] = 716.4 Note. The calculation result was rounded to one decimal place for comparison. → SAR evaluation for general population exposure conditions by measurement or numerical simulation is not required. Maximum Permissible Exposure(MPE) evaluation for mobile device S = Maximum power density G = Numeric power gain of the antenna S= P G / (4 R 2 π ) , ㎽/㎝ 2 P = Maximum power with turn-up tolerance R = Distance from transmitting antenna 2 = 0.038260 ㎽/㎝ Conclusion: The exposure condition of this device is compliant with FCC rules. 2 The limit for maximum permissible exposure = 0.476866 ㎽/㎝ ( f/1500 ) Copyright ⓒ 2018, UL Korea, Ltd.

FCC ID : VA5CMT248-X1MAX Standalone SAR test exclusion considerations March 25, 2019 - Device category = Portable device Mobile device - Transmitting mode = Single Transmitting Simultaneous Transmitting - Max. transmitting frequency = 784.5 MHz - Min. test separation distance = 200 mm - Max. Antenna Gain = 0.84 dBi - Max. power with turn-up tolerance = 24.00 dBm = 251.2 mW ( Typical Power = Max. 24.00 dBm ) Note. LTE Cat.M1 Band 13 KDB 447498 D01 clasue 4.3.1 Step b-1) SAR test exclusion thresholds for 100MHz to 1500MHz at test separationn distances > 50 mm [ Threshold at 50 mm + ( test separation distance - 50 mm ) X ( f(MHz ) / 150 ) ] mW = [ 1.11 + ( 200mm - 50mm ) X ( 784.5MHz / 150 ) ] = 785.6 Note. The calculation result was rounded to one decimal place for comparison. → SAR evaluation for general population exposure conditions by measurement or numerical simulation is not required. Maximum Permissible Exposure(MPE) evaluation for mobile device S = Maximum power density G = Numeric power gain of the antenna S= P G / (4 R 2 π ) , ㎽/㎝ 2 P = Maximum power with turn-up tolerance R = Distance from transmitting antenna 2 = 0.060639 ㎽/㎝ Conclusion: The exposure condition of this device is compliant with FCC rules. 2 The limit for maximum permissible exposure = 0.523000 ㎽/㎝ ( f/1500 ) Copyright ⓒ 2018, UL Korea, Ltd.

FCC ID : VA5CMT248-X1MAX Standalone SAR test exclusion considerations March 25, 2019 - Device category = Portable device Mobile device - Transmitting mode = Single Transmitting Simultaneous Transmitting - Max. transmitting frequency = 2480 MHz - Min. test separation distance = 200 mm - Max. Antenna Gain = 1.99 dBi - Max. power with turn-up tolerance = 6.00 dBm = 4.0 mW ( Typical Power = Max. 6.00 dBm ) Note. BLE KDB 447498 D01 clasue 4.3.1 Step 2-2) SAR test exclusion thresholds for 1500MHz to 6GHz at test separationn distances > 50 mm [ Threshold at 50 mm + ( test separation distance - 50 mm ) X 10 ] mW = [ 0.03 + ( 200mm - 50mm X 10 ) ] = 1500 Note. The calculation result was rounded to one decimal place for comparison. → SAR evaluation for general population exposure conditions by measurement or numerical simulation is not required. Maximum Permissible Exposure(MPE) evaluation for mobile device S = Maximum power density G = Numeric power gain of the antenna S= P G / (4 R 2 π ) , ㎽/㎝ 2 P = Maximum power with turn-up tolerance R = Distance from transmitting antenna 2 = 0.001258 ㎽/㎝ Conclusion: The exposure condition of this device is compliant with FCC rules. 2 The limit for maximum permissible exposure = 1.000000 ㎽/㎝ Copyright ⓒ 2018, UL Korea, Ltd.

FCC ID : VA5CMT248-X1MAX Standalone SAR test exclusion considerations March 25, 2019 Maximum power density, S MPE Limit Modules 2 2 MPE Ratio (mW/cm ) (mW/cm ) WWAN Module / LTE Cat.M1 Band 2 0.107337 0.564400 0.1902 WWAN Module / LTE Cat.M1 Band 4 0.095916 1.000000 0.0959 WWAN Module / LTE Cat.M1 Band 12 0.038260 0.565866 0.0676 WWAN Module / LTE Cat.M1 Band 13 0.060639 1.000000 0.0606 BLE (2.4G) 0.001258 1.000000 0.0013 Maximum MPE ratio: (0.1902 + 0.0013) 0.1915 < 1 Copyright ⓒ 2018, UL Korea, Ltd.


Document Created: 2019-05-07 02:51:21
Document Modified: 2019-05-07 02:51:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC